• Speech Sciences
• /
• v.5 no.1
• /
• pp.151-165
• /
• 1999

This paper describes a series of researches to diagnose vocal diseases using the statistical method and the acoustic signal analysis method. Speech materials are collected at the hospital. Using the pathological database, the basic parameters for the diagnosis are obtained. Based on the statistical characteristics of the parameters, valid parameters are chosen and those are used to diagnose the pathological speech signal. Cepstrum is used to extract parameters which represents characteristics of pathological speech. 3 layered neural network is used to train and classify pathological speech into normal, benign and malignant case.

• Advances in robotics research
• /
• v.2 no.1
• /
• pp.99-112
• /
• 2018

The main contribution of this work is the design of a field programmable gate array (FPGA) based ARX-Laguerre proportional-integral observation (PIO) system for fault detection and identification (FDI) in a multi-input, multi-output (MIMO) nonlinear uncertain dynamical robot manipulators. An ARX-Laguerre method was used in this study to dynamic modeling the robot manipulator in the presence of uncertainty and disturbance. To address the challenges of robustness, fault detection, isolation, and estimation the proposed FPGA-based PI observer was applied to the ARX-Laguerre robot model. The effectiveness and accuracy of FPGA based ARX-Laguerre PIO was tested by first three degrees of the freedom PUMA robot manipulator, yielding 6.3%, 10.73%, and 4.23%, average performance improvement for three types of faults (e.g., actuator fault, sensor faults, and composite fault), respectively.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.136-139
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the propagation characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, propagation characteristics of GIS PD signals were measured in the mock-up GIS bus and it was found that the propagation characteristics of the high band showed a better result in accordance with the infernal configuration of the GIS bus than those of the full band.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.686-693
• /
• 2010

In this paper, a fault diagnosis method based on fuzzy logic for the three-parallel power converter in a wind turbine system is presented. The method can not only detect both open and short faults but can also identify faulty switching devices without additional voltage sensors or an analysis modeling of the system. The location of a faulty switch can be indicated by six-patterns of a stator current vector and the fault switching device detection is achieved by analyzing the current vector. A fault tolerant algorithm is also presented to maintain proper performance under faulty conditions. The reliability of the proposed fault detection technique has been proven by simulations and experiments with a 10kW simulator.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.204-209
• /
• 2016

It is difficult to establish accurate modeling of PV power system because of various uncertainty. However, it is important work to modeling of PV for fault diagnosis. This paper proposes modeling and fault diagnosis method using correlation analysis and ELM(Extreme Learning Machine). Rather than using total data, we select optimal time interval with higher corelation between PV power and solar irradiation. Also, we use average value during 60 minute to avoid rapid variation of PV power. To show the effectiveness of the proposed method, we performed various experiments by dataset.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.216-219
• /
• 2003

This paper presents the analyzing method for surface temperature distribution of a cast-resin transformer. For the study, the surface temperature of the transformer winding was measured and analyzed by a infrared thermography system. Alternating voltages were applied to simulate deterioration of the specimen transformer, and the hot-spot on the transformer surface was measured to analyze the condition for the winding. The hot line condition measured to the changes in surface temperature using infrared thermography camera and was set up the based of diagnostic method of the electric power apparatus. The results ould show the possibility of remote diagnosis using internet.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.134-139
• /
• 2004

The correlation dimension of a nonlinear method for the diagnosis on the clearance of rotating machinery is introduced in this paper. The correlation dimension can provide some intrinsic information of an underlying dynamic system by reconstructing measured scalar time series. Vibration signals measured from a rotor with different operating conditions are analyzed using the correlation dimension. The results show that the correlation dimension method can identify the magnitude of the clearance of a rotor and the lubricating condition.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• Journal of Korean Medical classics
• /
• v.29 no.2
• /
• pp.13-29
• /
• 2016

Objectives : The purpose of this study is to investigate the concept of the Chukbu(尺膚) diagnosis in Huangdineijing(黃帝內經) and explain the characteristic of Chukbu(尺膚) diagnosis and causes of its clinical applicational decline. It will help the application of the Chukbu(尺膚) diagnosis to clinical treatment. Methods : The Sikuquanshu(四庫全書) database and Traditional Chinese Medical(TCM) books web database were used. The related contents of the Chukbu(尺膚) diagnosis in Huangdineijing (黃帝內經) and its annotation books were analyzed. The mentions on the Chukbu(尺膚) diagnosis in other medical books were examined. Results & Conclusions : The Chukbu(尺膚) diagnosis is important in the diagnostic system of the Huangdineijing(黃帝內經). The Chukbu(尺膚) diagnosis is composed of inspection and palpation. Its characteristic is something different compared to that of the Chongumaek(寸口脈) diagnosis; it relatively diagnoses condition of exterior disease(表病). The causes of its clinical applicational decline are relative inconvenience, limits of feudal society, and development of Zangfubianzheng(臟腑辨證) in that era.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.420-429
• /
• 2004

It has been needed diagnosis technology of the EFG(Electro Functio Gram) measurement concept which is incorporated characteristic of modern science and biomedical engineering, because function abnormality diagnosis can't diagnose with visualization instruments or clinical pathology. The general diagnosis system(EFG system) has been developed to use basic diagnosis instrument that has reappearance, reliance and convenience using the functio diagnosis technology, in the field of western/oriental medicine. Also, we improved sticking electrode and simultaneous measurement method of the limbs 8CH, head 2CH to diagnose body circulation of Qi and acupoints for Oriental Medicine diagnosis/therapy. The result of clinical for adult man 20 persons, the EFG system can diagnose state of 12 meridians and autonomic nervous system. Therefore, in this paper, we designed of oriental medicine diagnosis system by bio-electric response with materialized H/W and S/W for 12 meridians state diagnosis of human body and system construction of the EFG.