• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.202-206
• /
• 2006

The plasticized cellulose diacetate (CDA) was prepared by melt processing methods using triacetine (TA) as a plasticizer. Additionally, processability of CDA was enhanced by using epoxidized soybean oil as a secondary plasticizer. The glass transition temperature of plasticized CDA was observed at $50^{\circ}C$ lower than virgin CDA and the incorporation of 5% ESO also resulted in the additional $20^{\circ}C$ decrease in the $T_g$. The tensile properties and modulus of plasticized CDA were better than commercial PP and PLA. The aerobic biodegradability of CDA in controlled compositing condition resulted in 90% of degradation during 60 days.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.4
• /
• pp.797-810
• /
• 1998

The purpose of this study was to develop a new way of delivery system of chlorhexidine using self-curing acrylic resin. Different preparations of chlorhexidine, such as chlorhexidine varnish($Chlorzoin^{(R)}$) and chlorhexidine diacetate crystalline, were mixed into self-curing acrylic resin with different methods. Every resin plate was made and was immersed in 100ml of distilled water individually, and kept in an incubator at $37^{\circ}C$. Solution(0.8ml) was collected from the each container at every 24 hours, and the amount of released chlorhexidine in the solution was measured in an ultraviolet spectrophotometer at 255nm. Flexural strength of all of the resin plates in the Experiment 2-A and 2-B were measured using Instron at the end of the experimental periods. The results were as follows: 1. It was found that chlorhexidine was released from the experimental groups in the Experiment 1, 2-A, and 2-B. And the release of chlorhexidine from all of the experimental groups showed a pattern of sustained-release preparation. 2. It seemed likely that a condition of "dryness" reduced a release of chlorhexidine from the chlorhexidine varnish. 3. It may be stated that a method of "chlorhexidine diacetate mix" with the polymer be more efficient than a method of "Chlorzoin mix" with the monomer. 4. Although it was evident that a flexural strength of the acrylic resin plates be reduced by a mix of either Chlorzoin or chlorhexidine diacetate crystalline, it seemed likely that the resin plates except Group 4 and 5 in the Experiment 2-B may be usable in the clinical situation.

• Ocean and Polar Research
• /
• v.31 no.4
• /
• pp.349-357
• /
• 2009

Ballast water is widely recognized as a serious environmental problem due to the risk of introducing non-indigenous aquatic species. In this study we aimed to investigate measures which can minimize the transfer of aquatic organisms from ballast water. Securing more reliable technologies to determine the viability of aquatic organisms is an important initiative in ballast water management systems. To evaluate the viability of marine phytoplankton, we designed the staining methods of fluorescein diacetate (FDA) and Calcein-AM assay on each target species belonging to different groups, such as bacillariphyceae, dinophyceae, raphidophyceae, chrysophyceae, haptophyceae and chlorophyceae. The FDA method, which is based on measurements of cell esterase activity using a fluorimetric stain, was the best dye for determining live cells of almost all phytoplankton species, except several diatoms tested in this study. On the other hand, although fluorescence of Calcein-AM was very clear for a comparatively longer time, green fluorescence per cell volume was lacking in most of the tested species. According to the Flow CAM method, which is a continuous imaging technique designed to characterize particles, green fluorescence values of stained cells by FDA were significantly higher than those of Calcein-AM treatments and control, implying that the Flow CAM using FDA assay could be adapted as an important tool for distinguishing living cells from dead cells. Our results suggest that the FDA and Calcein-AM methods can be adapted for use on phytoplankton, though species-specific characters are greatly different from one organism to another.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.551-555
• /
• 2004

Cellulose diacetate (CDA) nanocomposite films were prepared by using various plasticizer and montmorillonite nanofiller in methylene chloride/ethanol (9:1 w/w) mixed solution. The thermal property (T$_{g}$) of prepared CDA films was observed by DSC and T$_{g}$ of the films was decreased with the increase in the plasticizer content. The degree of dispersion of MMT in the CDA film was observed by XRD and mechanical property of CDA film was measured by tensile strength and Young's modulus. When the plasticizer was added into the CDA film upto 30 wt%, the Young's modulus of film was decreased from 1930 MPa to 1131 MPa but was increased from 1731 MPa to 2272 MPa when the MMT was added into the film upto 7 wt%. The mechanical properties of CDA films were decreased by addition of plasticizer but strengthened by the incorporation of MMT.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.87-96
• /
• 2014

In the present study, a yeast species isolated from CETP, Vellore, Tamilnadu was identified as Cryptococcus sp. VITGBN2 based on molecular techniques and was found to be a potent producer of acidic diacetate sophorolipid in mineral salt media containing vegetable oil as additional carbon source. The chemical structure of the purified biosurfactant was identified as acidic diacetate sophorolipid through GC-MS analysis. This sophorolipid was used as a stabilizer for synthesis of zinc oxide nanoparticles (ZON). The formation of biofunctionalized ZON was characterized using UV-visible spectroscopy, XRD, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy. The antimicrobial activities of naked ZON and sophorolipid functionalized ZON were tested based on the diameter of inhibition zone in agar well diffusion assay, microbial growth rate determination, protein leakage analysis, and lactate dehydrogenase assay. Bacterial pathogen Salmonella enterica and fungal pathogen Candida albicans showed more sensitivity to sophorolipid biofunctionalized ZON compared with naked ZON. Among the two pathogens, S. enterica showed higher sensitivity towards sophorolipid biofunctionalized ZON. SEM analysis showed that cell damage occurred through cell elongation in the case of S. enterica, whereas cell rupture was found to occur predominantly in the case of C. albicans. This is the first report on the dual role of yeast-mediated sophorolipid used as a biostabilizer for ZON synthesis as well as a novel functionalizing agent showing antimicrobial property.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.96-112
• /
• 2023

Rye (Secale cereale L.) is a valuable annual forage crop in Korea but there is limited information about the impact of chemical and biological additives on fermentation characteristics of the crop. This experiment was conducted to investigate fermentation dynamics of wilted forage rye treated with the following six additives; control (no additive), sodium diacetate applied at 3 g/kg wilted forage weight (SDA3), 6 g/kg wilted forage weight (SDA6), inoculations (10⁶ CFU/g wilted forage) of Lactobacillus plantarum (LP), L. buchneri (LB), or LP+LB. The ensiled rye sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days indicated that the acidification occurred fast within five days of storage than the rest of the storage period. The microbial inoculants decline the pH of ensiled forage, more rapidly than the control or SDA treated, which accompanied by the decrease of water-soluble carbohydrates and increase of lactic acid. Compared with the control silage, all treatments suppressed ammonia-nitrogen formation below to 35 g/kg DM throughout the sampling period. Suppression of total microbial counting occurred in SDA6, LP, and LP + LB. The lactic acid production rates were generally higher in microbial inoculation treatments. Acetic acid concentration was lowest in the LP-treated silage and highest in the SDA- and LB-treated silages. The in vitro dry matter (DM) digestibility and total digestible nutrients were the highest in the silage treated with SDA (6 g/kg) at day 45 of ensiling. Based on lower ammonia-nitrogen concentrations and higher feed value, ensiling forage rye treated with SDA at 6 g/kg is promising through enhanced silage quality.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.15-21
• /
• 2013

Nitric oxide (NO) is an important intra-intercellular signaling molecule that regulates many physiological processes and participates in the development some pathological conditions in animals. In this study, we compared different methods for determining NO concentration in the hemocytes of Manila clam Ruditapes philippinarum. For measuring the intracellular NO levels, we used the specific fluorescent probe 4,5-diaminofluorescein diacetate (DAF-2 DA), and the quantification methods that were compared were based on image analysis, spectrophotometry, and flow cytometry. NO concentration could be determined using all the 3 methods, and the concentration varied significantly depending upon the presence of NO regulators in the hemocytes; NO concentration increased in the presence of L-arginine, while it decreased in the presence of N-nitro-L-arginine methyl ester. In particular, it is found that estimation of NO using a flowcytometry is more economical, reliable and accurate compared to image analysis and spectrophotometry. Accordingly we believe that determining NO concentration by using flowcytometry will be useful in evaluating physiological and pathological conditions in marine bivalves.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.6
• /
• pp.461-467
• /
• 2005

Background. 5-(and-6)-carboxy-2',7'-dichlorofluorescein diacetate, succinimidyl ester mixed (CFSE) is the fluorescent labelling agent of living cells and used to trace the cells in vivo after transplatnation of various cells. The CFSE labelled cells can maintain fluorescence for up to 7 days after labelling. The MC3T3-E1 cell line (MC3T3) has been used for many studies about osteoblast, which is well known as a mouse preosteoblast. So the CFSE would be used to trace the transplanted MC3T3. However there are few reports about CFSE labelling of MC3T3. This study is aimed to know about adequate concenturation and incubation time of CFSE to MC3T3. Materials and methods. The MC3T3 was incubated in a humidified atmosphere of 95% air with 5% $CO_2$ at $37^{\circ}C$ using ${\alpha}$-minimal essential medium (${alpha}$-MEM) containing10% FBS and gentamycin. Ten mM CFSE solution in dimethylsulphoxide (DMSO: 1%) was diluted with phosphate buffered saline (PBS) and final concentration of culture medium was, respectively, 5, 10, 15, 20, 25 and 30 ${{\mu}M$. Then the MC3T3 was incubated with CFSE in a humidified atmosphere of 95% air with 5% $CO_2$ at $37^{\circ}C$ for 5, 10, 15, 20, 25, 30, 35, 40 and 45 minutes in each concentration. The fluorescence of CFSE labelled cells was analysed with a inverted fluorescence microscope. The duration of cell labelling was also studied. Trypan blue dye exclusion test was done for cell viability. Results. For concentration between 5 and 10 ${\mu}M$, CFSE did not significantly label the MC3T3 in vitro. The destruction of MC3T3 was observed at the concentration of 20 ${\mu}M$. In the concentration of 15 ${\mu}M$, the best labelling was obtained at an incubation period between 15 and 30 minutes. The MC3T3 labelled with an incubation period of 15 minutes at 15 ${\mu}M$ was still fluorescent 7 days after CFSE labelling. The mean cell viability was 95.93%. Conclusion. These results suggests an incubation period of 15 minutes at 15 ${\mu}M$ of CFSE provides best labelling of MC3T3 in vitro.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1447-1448
• /
• 2004

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.354-361
• /
• 2014

This study was conducted to investigate whether several composted liquid manures (CLMs) are useful for biological control of large patch on zoysiagrass and investigate the chemical and biological factors to suppress large patch in soil treated with CLMs. The CLMs were produced at 4 different facilities for livestock excretion treatments located in Korea. Field experiments were carried out at 5 golf courses located near each facility. CLM and Chemical fertilizer (CF: water soluble fertilizer, 20-20-20) were applied four and three times with N at $12g\;m^{-2}$ per year, respectively. There was significant increase of concentration of K, Na, and Cu of soil treated with CLM compared to CF treatment. Among experimental plots, CN and GG2 plot sites were shown significant higher effect of biological control 80% and 50% respectively against large patch disease. The number of bacteria, Actinomycetes, and fungi in soil at these sites significantly increased and fluorescein diacetate hydrolytic activity was enhanced, while the soil was treated with CLM. The results of this study demonstrated that CLM application has effect on soil to suppress large patch and reduce the use of fungicide in environment-friendly turf management.