• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1843-1850
• /
• 2014

PS-D2EHPA beads were prepared by immobilizing di-2-ethylhexyl-phosphoric acid (D2EHPA) with polysulfone (PSf). The removal experiments of Cu(II) and Pb(II) by the prepared PS-D2EHPA beads were conducted batchwise. The removal efficiency of Cu(II) and Pb(II) by PS-D2EHPA beads was increased with increasing pH of solution. The removal rate of Cu(II) and Pb(II) was well described by the pseudo-second-order kinetic model. The maximum removal capacity of Cu(II) and Pb(II) obtained from Langmuir isotherm were 2.58 mg/g and 12.63 mg/g, respectively. External mass transfer coefficients for the removal of Cu(II) and Pb(II) by PS-D2EHPA beads were obtained $0.61{\times}10^{-2}{\sim}5.87{\times}10^{-2}/min$ and $1.55{\times}10^{-2}{\sim}8.53{\times}10^{-2}/min$, respectively and diffusion coefficients were obtained $1.32{\times}10^{-4}{\sim}3.98{\times}10^{-4}cm^2/min$ and $1.80{\times}10^{-4}{\sim}2.28{\times}10^{-4}cm^2/min$, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2109-2113
• /
• 2014

Solvent extraction of Fe(III) from chloride solution by using a mixture of D2EHPA (Di-(2-ethylhexyl)-phosphoric acid) and TBP (Tri-butyl phosphate) and the reductive stripping of Fe(III) from the loaded organic were investigated. Quantitative extraction of Fe(III) from the solution (Fe concentration = 90 g/L) was accomplished in two cross-current extraction stages by using the mixture of D2EHPA and TBP. In order to facilitate the stripping efficiency, a reductive stripping method was employed by using $H_2SO_3$ or $Na_2SO_3$ as a reducing agent. The addition of $H_2SO_4$ into reducing agents led to improvement in the stripping efficiency while high concentration acid would suppress it. Both of the mixtures of $H_2SO_4+H_2SO_3$ and $H_2SO_4+Na_2SO_3$ showed good efficiency for the stripping of Fe(III), while the latter was recommended as the stripping solution based on the economics and experimental condition.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• 청정기술
• /
• 제26권2호
• /
• pp.116-121
• /
• 2020

본 연구에서는 유가금속 회수를 한 전기차 폐배터리 부산물의 재활용에 관하여 연구하였다. 폐배터리 부산물에는 희토류들이 남아있으나, 부산물의 형태로는 소재로서의 가치가 없기에 정제과정을 거쳐 희토류 산화물로 회수하였다. 희토류침전분말 형태의 부산물을 30% 수산화나트륨을 이용하여 가공이 편한 수산화물로 변환한 뒤, 옥살산의 용해도 차이를 이용하여 남아 있는 불순물을 정제한 뒤, D2EHPA (Di-(2-ethylhexyl) phosphoric acid)를 사용하여 이트륨을 분리하였다. 과망가니즈산 칼륨을 이용하여 세륨을 분리 후, PC88A (2-ethylhexylphosphonic acid mono-2-ethylhexyl ester)를 사용하여 란타넘과 네오디뮴을 분리하였다. 그 후 800 ℃의 온도에서 소성하여 란타넘, 네오디뮴 산화물로 재생하는 방법을 확인하였다.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.47-53
• /
• 2015

Removal characteristics of Cu(II) ions by solid-phase extractant immobilized D2EHPA and TBP in PVC were investigated. Cu(II) ion concentrations in the solution and removal capacity of Cu(II) ion according to operation time were compared. The lower the initial concentration of Cu(II) ion in aqueous solution was, the removal capacity of Cu(II) ion by solid-phase extractant was increased relatively. The bigger the initial concentration of Cu(II) ion was, the removal capacity of Cu(II) ion was increased relatively. The pseudo-second-order kinetics according to operation time was showed more satisfying results than the pseudo-first-order kinetics for the removal velocity of Cu(II) ion. The removal capacity of Cu(II) ion was 0.025 mg/g in aqueous solution of pH 2, but the removal capacity of Cu(II) ion was increased to 0.33 mg/g mg/g in aqueous solution of pH 4 according to increasing pH.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.303-308
• /
• 2017

여러 가지 금속을 에칭하기 위하여 사용된 $FeCl_3$ 폐용액은 유가금속인 니켈을 함유하고 있다. 본 연구에서는 염화철을 재생하고 남은 니켈 함유 에칭폐액으로부터 니켈을 고순도의 탄산니켈 결정분말로 회수하고자 하였다. 5 % NaOH 수용액을 이용하여 pH 4의 조건에서 1차적으로 철 성분의 불순물을 약 97 % 제거하고 추가적으로 남은 불순물을 제거하기 위하여 용매추출제 D2EHPA(Di-(2-ethylhexyl) phosphoric acid)를 사용하여 불순물로서 존재하는 금속이온들을 약 99% 제거하였다. 그 후 불순물이 제거된 염화니켈 용액에 탄산나트륨과의 반응을 통하여 99.9 % 이상의 순도를 가진 탄산니켈분말을 얻을 수 있었다.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.288-293
• /
• 2006

Basic investigations have been carried out for the solvent extraction of silver contained in the waste photographic fixing solution using D2EHPA as an extractant. Extraction experiments were conducted using artificial waste solution which was made by dissolving $AgNO_3$ in distilled water along with actual waste fixing solution. For artificial waste solution, the extraction of silver was found to occur very rapidly at the initial stage of extraction. In addition, more silver was extracted as the volumetric ratio between aqueous phase and organic phase was decreased. The volumetric ratio of organic extractant to diluent was also taken as an influential variable and the extracted amount of silver was observed to decrease with temperature. The characteristics of silver extraction for actual fixing solution was generally similar to that for artificial waste solution. Regarding the kinetic analysis, the extraction of silver contained in the actual solution was observed to follow a first order reaction.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.270-274
• /
• 2001

With Increasing importance of electroless nickel plating technology in many fields such as electronic and automobile industries, the treatment of the spent baths is becoming a serious problem. These spent baths contain iron and zinc as impurities, organic acids as complexing reagents, and phosphonate ions as oxidized species of tile reducing reagent. as well as several grams per liter of nickel. The spent baths are currently treated by conventional precipitation method. but a mettled with no sludge generation is desired. This work aims at establishing a recycling process of nickel from tile spent baths using solvent extraction. Extraction behaviors of nickel. iron. and zinc in various 쇼pes of real spent baths are investigated as a function of pH using LIX841, di (2-ethylhexyl)phosphoric acid (D2EHPA), and PC88A as tile extractants. Nickel is extracted by LIX84I at the equilibrium pH of more than 6 with high efficiency. For the weakly acid baths. iron and zinc are extracted by D2EHPA or PC88A without adjusting the pH of the baths leaving nickel in the aqueous phase. Stripping of nickel from LIX84I with sulfuric acid is also investigated. It is shown that concentrated nickel sulfate solution (> 100 ㎏-Ni/㎥) is obtained. This solution can be reused in the electroless plating process. Based on these findings, flow sheets for recovering nickel from the spent baths are proposed.

• 자원리싸이클링
• /
• 제32권1호
• /
• pp.21-32
• /
• 2023

리튬이온 배터리(LIB) 제조를 위한 리튬의 사용이 점차 증가함에 따라 그에 따라 발생되는 리튬이온배터리 폐기가 증가될 것으로 사료된다. 이에 따라 폐배터리를 재활용을 하기위한 용매 추출을 통한 재활용에 대한 활발한 연구가 니켈, 코발트 및 망간과 같은 유가금속을 제거한 후 얻은 폐 용액에서 리튬의 회수가 중요하다. 본 연구에서는 폐이차전지 재활용공정 후 발생되는 폐액에서 리튬을 회수하기위해 추출제 Di-(2-ethylhexyl) hosphoricacid(D2EHPA)와 등유의 개질제 Tri-n-butyphosphate(TBP)를 선택적으로 혼합하여 추출조건을 최적화하였다. 폐액에는 리튬과 고농도의 나트륨(Li⁺ = 0.5% ~ 1%, Na⁺ = 3 ~ 6.5%)을 함유하고 있었으며, 리튬의 추출은 유기용매의 다른 구성에서 최종적으로 20% D2EHPA + 20% TBP + 60% 등유로 구성된 유기용매에서 효과적인 추출을 조건을 확립하였다. NaOH의 비누화를 이용한 SX 시스템에서는 평형 pH 4~4.5에서 유기 대 수성(O/A)이 5일 때 약 95% 이상의 리튬이 선택적으로 추출되는 것을 확인하였다. 적은 양의 나트륨으로 염화리튬에서 탄산리튬 분말을 얻기 위해 고순도 중탄산암모늄을 처리하였다. 최종적으로 처리된 탄산리튬에 여러번 세수를 통하여 미량의 나트륨을 제거하고 고순도 탄산리튬 분말(순도 99.2%)을 제조하였다. 따라서 본 연구를 통하여 폐이차전지 재활용공정에서 발생되는 폐액을 활용하여 탄산리튬의 효율적인 제조방법을 확인하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권1호
• /
• pp.24-31
• /
• 1998

The separation and concentration of L-phenylalanine (L-Phe) using a supported liquid membrane (SLM) is investigated. A cation complex agent, di-2-ethylhexyl phosphoric acid (D2EHPA), is used as a carrier in the SLM with n-Heptane as a solvent. The reaction order and equilibrium constant in the formation reaction of L-phe-carrier complex are obtained from the extraction experiment. A mathematical model for a carrier mediated counter transport process is proposed to estimate the diffusion coefficient of L-phe-carrier complexly in the liquid membrant. Permeation experiments of L-phe using a SLM are performed under various operating conditions and optimum conditions for the transport of L-phe are obtained. Concentration of L-phe in the strip phase against its concentration is observed. Transport rate of glucose through liquid membrane is less than that of L-phe in the competitive transport of L-phe and glucose. And the existence of glucose reduced the transport rate of L-phe. The performance of separation with continuous strip phase is increased due to the dilution effect in the strip phase.