• Title/Summary/Keyword: Dew

Search Result 314, Processing Time 0.027 seconds

Influence of Nitrogen/Hydrogen Atmospheres on Sintered Properties of P/M Components

  • Philips, Thomas;Koh, Kyung-Sug
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.818-819
    • /
    • 2006
  • The effect of individual gas constituents in a sintering atmosphere is examined to optimize the sintered properties of Iron-Carbon P/M components. The influence of sintered properties is reviewed as a function of hydrogen percentages and dew point in the sintering zone. Microstructures, porosity, pore morphology and dimensional changes are the subject of this review. The effects of CO containing atmospheres are compared against the non CO atmospheres in terms of hardness, carbon control and dimensional changes.

  • PDF

A Distributed Characteristics of Water in Mineral Oil by Convection (대류로 의한 변압기 오일의 수분 분포 특성)

  • Joeng, Jin-Hye;Han, Sang-Ok;Lee, Sei-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2007.04b
    • /
    • pp.43-45
    • /
    • 2007
  • 최근 국내에는 변압기의 사용이 급속도로 증가하고 있지만 신뢰도가 높은 진단이 어려워 26년의 기준수명보다 오래 사용하지 못하고 폐기하는 상황이다. 본 논문에서는 변압기사고 및 수명단축의 가장 큰 원인인 수분의 분포특성을 확인해 보았다. 현재 수분을 측정하는 방법에는 Dew-Point법, Karl- Fisher법, RVM등 여러 가지가 있는데 Karl-Fisher법과 RVM를 사용하여 샘플채취 위치에 대한 특성을 실험하였다.

  • PDF

Quantized Differential Energy Watermarking Technology (양자화된 차분에너지 워터마킹 기법)

  • 유원영;이승욱;오원근
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.04a
    • /
    • pp.446-448
    • /
    • 2003
  • 본 논문은 MPEG 비디오를 위한 양자화된 차분 에너지 워터마킹(QDEW) 알고리즘을 제안한다. 이 알고리즘은 블록의 고주파 성분인 DCT 계수를 선택적으로 제거함으로써 워터마크를 삽입하는 방식이다. 특히 제안된 방벌은 기존의 차분 에너지 워터마킹(DEW)의 단순비교방식과 다르게 양자화단위로 에너지 크기를 비교함으로써 큰 범위의 에너지가 차이날 때 발생되는 다량의 주파수제거 문제를 해결하여 화질의 열화를 방지하고 삽입되는 워터마크의 중량을 증가시켰다. 그리고 DCT계수를 제거하는 것으로만 워터마크를 삽입할 수 있기 때문에 재인코딩 과정없이 MPEG스트림에서 직접 워터마크를 삽입할 수 입는 장점이 있다.

  • PDF

A Study on Humid Control Characteristics of Alkaline Desiccants (알칼리성 용해제의 조습특성에 관한 연구)

  • Hong, Young-Ho
    • Applied Chemistry for Engineering
    • /
    • v.21 no.2
    • /
    • pp.169-173
    • /
    • 2010
  • Many salts have the ability to attract and remove water vapor from the surrounding environment. The ability of each salt to remove water vapor is based on the flow rate and temperature of air in surrounding. The objective of this study was toinvestigate the humid control characteristics in air-water system by using a desiccants. The aim is to asses the influence of three parameters on the humid control process which are air volume rate, air temperature and desiccant amount. Humidity control materials which consist of K (potassium) or Na (sodium) have been synthesized by the aqueous process. The humidity control properties of materials have been also investigated. Experiment results are as following. Thermal characteristics of desiccants showed similar properties regardless of processing condition. The experiments were examined by using artificial air-water system (humidity : 70~93%, air volume rate : $0.22{\sim}0.69m^3/s$). The results showed that the Na-type desiccant was an effective material. It was found that dew point increased with air volume rate, and the humidity change in humid control process was depended on desiccants amount.

A Study on Operating Method to Save Energy from the Adsorption Dryer in the Process of Purifying Compressed Air (고순도 압축공기 제조시스템의 흡착식 Dryer에서 에너지절감을 위한 운전방법에 관한 연구)

  • Kang, Seok-Wan;Chang, Sung-Ho;Kim, Hyeon-Joon;Kim, Sung-Soo;Lee, Yeong-Wook
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.39 no.3
    • /
    • pp.180-191
    • /
    • 2016
  • Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant's compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in "A" company. The compressed air passes through a pressure vessel with two "towers" filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air $70^{\circ}C$ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

Study on the Estimation of Frost Occurrence Classification Using Machine Learning Methods (기계학습법을 이용한 서리 발생 구분 추정 연구)

  • Kim, Yongseok;Shim, Kyo-Moon;Jung, Myung-Pyo;Choi, In-tae
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.19 no.3
    • /
    • pp.86-92
    • /
    • 2017
  • In this study, a model to classify frost occurrence and frost free day was developed using the digital weather forecast data provided by Korea Meteorological Administration (KMA). The minimum temperature, average wind speed, relative humidity, and dew point temperature were identified as the meteorological variables useful for classification frost occurrence and frost-free days. It was found that frost-occurrence date tended to have relatively low values of the minimum temperature, dew point temperature, and average wind speed. On the other hand, relatively humidity on frost-free days was higher than on frost-occurrence dates. Models based on machine learning methods including Artificial Neural Network (ANN), Random Forest(RF), Support Vector Machine(SVM) with those meteorological factors had >70% of accuracy. This results suggested that these models would be useful to predict the occurrence of frost using a digital weather forecast data.

Investigation on the Conservation Environment for the Shelter of Stone Cultural Properties (I)-Focused on the Standing Stone Buddhist Triad in Bae-ri, Gyeongju and Rock-carved Triad Buddha in Seosan (석조문화재 보호각의 보존환경 연구(I)-경주배리석불입상, 서산마애삼존불상을 중심으로)

  • Hong, Jung-Ki;Eom, Doo-Sung;Chung, Young-Jae;Masayuki Morii
    • 보존과학연구
    • /
    • s.26
    • /
    • pp.141-164
    • /
    • 2005
  • Most of the stone cultural properties is exposed to the weathering factor(rain, windetc.), so the shelter is constructed for reduction of its direct effect. But the shelter is indicated some problems that inharmoniousness of the surroundings, in section disturbance for insufficiency of light, the loss about the value of cultural properties and so on. So we have investigated on environmental condition (temperature, relative humidity, wind etc.) at the Standing Stone Buddhist Triad in Bae-ri, Gyeongju and Rock-carved Triad Buddha in Seosan because check the effect of the shelter. As the result, the Standing Stone Buddhist Triad in Bae-ri, Gyeongju is located a pine wood and a lot of bamboo grow naturally in nearing. Environmental difference on inside and outside of the shelter is not found because opened on all sides. But there is so dim for the direction of the sunlight that can't see the Standing Stone Buddhist. The base rock of Rock-carved Triad Buddha in Seosan well develop with crack and break, and the vegetation(trees, moss, lichen etc.) grow naturally in surroundings. Environmental difference on inside and outside of the shelter is found because closed on all sides and opened the front gate only inspection time. Inside of the shelter was too calm(air-velocity not detected) and humid(over 75%RH). Also the surface is occurred the dew(at 2-4 pm) and the efflorescence for effect of the water(rain, dew etc.). Besides the head of the central Buddhist is so dangerous for crack.

  • PDF

The present situation of shelter and case study of stone cultural heritage (석조문화재 보호각 현황과 사례연구)

  • Shin, Eun-Jeong;Kim, Sa-Dug;Eom, Doo-Sung
    • 보존과학연구
    • /
    • s.31
    • /
    • pp.103-120
    • /
    • 2010
  • Most of the important stone cultural heritage (National treasures and Treasures) in Korea are mainly located outdoor and considerably affected by the changes of the temperature, humidity and rainfalls. 541 of the stone cultural heritage are preserved as National treasure and Treasure. The pagodas occupy 187 remains and next 127 Buddha statues, 68 monuments, 60 stupas, and the others 74 stone cultural heritages. The shelter has been installed for one pagoda, 60 Buddha statues, 36 monuments and two stupas. The shelters are categorized in three shapes as traditional shape, modern shape, and others (tradition+modern). Approximately 100 of shelters that have constructed in traditional ways, and about nine of shelters have modern ways, and the only one has the combination shape of tradition and modern, which has been constructed since mid 1900s and repaired from the 1980s~2000s. Many researchers are studying for improvement of manners such as repairing, remodeling or removing of the shelter because problems have occured on shelters. Architectural form of traditional style of Korean timber building is respected, but it has problems on importing natural sunlight to the inside as well as ventilation and spacial problems. However, it needs to supplement policies to improve the positive roles of shelters such as prevention of artificial damage, blocking acid rain, and so on. For instance, the rock-carved Buddha Triad in Seosan, it had problems with viewing, contamination, and dew condensation on the surface. These problems decreased after dismantling the shelter, the space was made for improvement of viewing and dew condensation, and moisture problems were in better conditions. The velocity wind is an important factor in drying conditions on the surface of the rock, therefore the condition has improved after dismantling the shelter.

  • PDF

Deterioration State and Behavior of Discontinuity System of the Seosan Maaesamjonbulsang (Rock-carved Triad Buddha in Seosan), Korea (서산 마애삼존불상의 훼손상태 및 불연속면의 거동특성)

  • Lee, Sun-Myung;Lee, Chan-Hee;Choi, Seok-Won;Yun, Seok-Bong
    • Journal of Conservation Science
    • /
    • v.19
    • /
    • pp.85-98
    • /
    • 2006
  • Rock property of the Seosan Maaesamjonbulsang is composed of biotite granite with medium grained texture. The triad Buddha is highly deteriorated by the joint, fracture, break-out, exfoliation, dew condensation of the surface and discoloration of the secondary pollutant. Host rock of the triad Buddha is divided dozens of rock blocks with various shape, and developed irregular discontinuity planes. Besides, the host rock is promoted biological pollution due to the surrounding crowded vegetation and high humidity environment. As the results of structural stability, it is confirmed that developed discontinuity system in the host rock is exposed instability sloping environment. Therefore, the host rock and surroundings are required maintenance, and required preservation by continuance monitoring for understand behavior of discontinuity system.

  • PDF

Humidification Characterization of water-to-gas Membrane Humidifier for Polymer Electrolyte Membrane Fuel Cell (고분자 전해질 연료전지용 water-to-gas 막 가습기의 투과 특성)

  • Chang, Dae-Kwon;Lee, Yong-Taek
    • Membrane Journal
    • /
    • v.20 no.4
    • /
    • pp.326-334
    • /
    • 2010
  • In this study, characterization and performance of membrane humidifier using membrane distillation was evaluated for moisture of fuel gas in the PEMFC. The data were expressed dew point. The best results show $51.19^{\circ}C$ at $60^{\circ}C$ of water temperature, $54.22^{\circ}C$ at 900 mL/min and $60.03^{\circ}C$ at 100 strands. The mass transfer modelling of membrane humidifier were able to predict humidification of fuel gases for operating PEMFC. When the membrane humidifier was applied to the 100 W stack, it showed stable voltage and power. The volume of membrane humidifier was small however, showed better performance than bubble humidifier.