• 한국대기환경학회지
• /
• 제8권1호
• /
• pp.45-51
• /
• 1992

A study on acidity in fog, dew and frost was carried out. Samples were taken during May 1990-February 1991 at two sites in Chongwon, Choongbook. The acidity of dew and of fog collected from grass at site A was 4.89 and 5.46, respectively. Dew in summer showed very strong acidity. The volume of dew deposited on grass was much less than the volume of rain, but dew is effective to diffuse acid predursors and acid materials. Dew and fog can remove more effectively atmospheric acid materiasl deoposited on grass by diurnal turbulent motion rather than direct absorption of acid predursors and materials in the atmosphere. In a polluted area, acidic dew and fog can be occurred by the direct absorption and oxidation of acidic predursors in the atmosphere as well as the role of wet removal on grass surface. Acidity of frost collected on teflon surface showed little difference to acidity of dew and fog on teflon surface. This suggests a similar absorption mechanism of atmospheric precursors and materials into dew and frost in the atmosphere. Strong acidity in dew, fog and frost appeared to occur from local pollution sources of several ten kilometres. In particular, strong acidity in dew, fog, and frost together with acid rain can accelerate a damage in ecosystems. Discussion is made on scientific analyses and seasonal variations of acidity of fog, dew and frost. A mechanism on acidification of fog, dew and frost is also discussed.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.195-202
• /
• 2013

PURPOSES : This study analyzed the regional dew possibility in road sign using meteorological data. METHODS : Four years of meteorological data such as temperature, humidity, dew point, wind velocity were collected and analyzed. As a result of literature review, dew was frequent in large diurnal range, high humidity and weak wind. So, dew possibility was analyzed by (temperature-dew point ${\leq}1^{\circ}C$ and wind velocity ${\leq}$ 1.5m/s). RESULTS : The possibility was analyzed for each meteorological observation point and the point of Suncheon and Bonghwa were selected as the most likely points of dew in road sign. The area of East Coast, Kyungbuk and Kyungnam were relatively low potential. CONCLUSIONS : Alternative with high effect of preventing dew should be selected in high possibility dew area despite of low economics.

• 한국도로학회논문집
• /
• 제14권2호
• /
• pp.55-61
• /
• 2012

도로표지는 운전자에게 정보제공의 역할을 하는 도로시설물로서 주행경로에 대한 운전자의 판단을 도와준다. 그러나, 주 야간의 온도, 습도 변화로 인한 도로표지판에 결로발생 시, 정보전달의 결함이 발생하여 교통사고 가능성을 높이는 원인으로 작용한다. 따라서, 도로표지판의 결로발생을 예방하기 위한 기술이 필요하다. 본 연구에서는 도로표지판의 결로발생을 예방하는 대안의 효과를 비교하기 위해 단열소재가 삽입된 시편, 결로방지필름이 부착된 시편을 선정하고 결로방지처리가 되지 않은 일반시편과 비교하였다. 분산분석과 사후검정(Tukey HSD)을 통해 각 시편에 발생한 측정시간에 따른 결로량을 비교 했으며, 결로량과 재귀반사도의 관계를 Pearson의 상관분석으로써 검증하였다. 분석결과, 결로방지필름이 부착된 시편에서 결로량이 적게 나타났으며, 결로발생 90초 후에는 결로방지필름의 부착 시편과 단열소재가 삽입된 시편에서 나타나는 결로량은 결로방지 처리가 되지 않은 시편에서 발생한 결로량과의 통계적인 차이가 존재하였다. 또한, 상관분석결과로써 결로량과 재귀반사도는 반비례하는 것으로 나타났다. 따라서, 도로표지판에 발생된 결로량과 재귀반사 변화율에 대하여, 결로방지필름의 부착과 단열소재의 삽입은 결로방지에 효과가 존재하는 것으로 판단된다.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.588-597
• /
• 1999

Sokkuram grotto, a UNESCO cultural heritage in Kyongju Korea, was originally covered with crushed rocks over its dome with ventilating holes. The grotto was perfectly preserved for more than 12 centuries until the upper structure was replaced with a concrete dome in the early 20th century to protect from total collapse. Since then, heavy dew formed on the granite surface to seriously damage the sculptures until it was further remodeled with air-conditioning facilities in the 60s. It is considered that the original upper porous structure had a dehumidifying capability. This research is made to unveil the dehumidifying mechanism of the rock layer during the rainy season in that area. A rock layer and a concrete layer are tested in a temperature/humidity-controlled room. No dew formation is observed for the two specimen for continued sunny days or continued rainy days. However, heavy dew formed on the concrete surface for a sunny day after long rainy days. It is thought that the sun evaporates water on the ground and dew is formed at the surface as the highly humid air touches the yet cold concrete. On the contrary, no dew formation is observed for the rock layer at any time. Even in the above worst situation, air flows downward through the cool rock layer and moisture is removed before reaching inside. Temperature measurement, flow visualization, observation of dew formation and measurement of air velocity are made to verify the mechanisms.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.645-650
• /
• 2018

본 논문에서는 옥내 외에 설치 운영되는 수배전반의 결로 현상을 방지하는 IT 기반 자동 온습도 제어기를 설계하고 제작하였다. 이슬 결로점 온도가 실내공간의 습도와 온도로부터 산출되고, 이슬 결로점 온도와 결로 부위의 온도를 비교하여 수배전반의 결로 현상을 방지할 수 있는 시설이 순차적으로 제어 동작되도록 구현하였다. 아울러 원격지의 수배전반의 결로 기반 제어기 동작 상태를 모니터링 할 수 있는 원격 모니터링 장치를 LoRa 무선통신 방식을 사용하여 구현하였다. 제어기와 원격 모니터링 장치를 설치 운영하여 전송되는 데이터의 정확성과 결로 기반 제어기 동작상태의 안정성을 확인하였다. 본 제어 장치는 수배전반 이외에 결로가 발생되는 장비에 설치되어 결로를 방지할 수 있는 장치로 용이하게 활용될 수 있다.

• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.565-571
• /
• 2009

본 연구에서는 천연가스의 탄화수소 이슬점과 물 이슬점을 계산하고자 하였다. 이를 위해 임계압력 근방까지 탄화수소 이슬점이 계산되도록 발산 방지 로직을 고안하였고 물 이슬점의 대해서는, 상용프로그램과 달리 탄화수소 이슬점 이하에서도 이슬점이 계산될 수 있도록 로직을 개발하였다. 그리고 계산결과는 국외 상용프로그램 및 ISO와 비교하였으며 차이는 없는 것으로 나타났다.

• 센서학회지
• /
• 제26권1호
• /
• pp.50-55
• /
• 2017

The measurement of absolute humidity of gases is essential in many industries. The effect of temperature on aluminum oxide and chilled mirror dew-point hygrometers is investigated. The temperature of laboratory, pipe line, and sensor is varied and the dew point is measured by two different aluminum oxide hygrometers. In all cases, the dew point of hygrometers is increased as the temperature is elevated. The reason behind this observation is due to desorption of water from the inside of pipe line and/or sensor surroundings at elevated temperature that result in the increase of the absolute humidity. Moreover, the sensor itself shows a certain degree of temperature dependency in sensing the humidity especially at low temperature. It is also studied that chilled mirror dew-point hygrometer may indicate a higher dew point than the reference at high temperature because the cooling capability of mirror is decreased at high temperature. Our study will provide evidences in the incorporation of the temperature effect as uncertainty factors in the standard calibration procedure for dew point hygrometers.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.724-731
• /
• 2011

Dew generation on an outer surface is considered as an important issue to be settled in the field of home appliances. In the case of a refrigerator that is subject to the dew generation problem on the surface of an outer-door of refrigeration thread, and so as to solve this problem, the electric heater is generally used for drying the dew. However, the heater inevitably requires electrical power consumption that is one of critical issues on the refrigerator. In this study, to prevent dew generation without the heater, a method of using induced heat from room temperature was proposed. In edge sides of a door, high conductive plates are installed and received the heat from outside that is relatively high temperature, and the heat is transferred onto dew generation region. Using prototypes, performance test was conducted under a certain temperature and humidity condition. The experimental results show that the surface temperature on the dew generation region was increased about $0.3{\sim}2.5^{\circ}C$ without use of any heater.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.578-582
• /
• 1998

In greenhouse studies, control efficacy of water chestnut (Eleocharis Kuroguwai) by Epicoccosorus nematosporus was affected by temperature and dew condition. The appressoria were formed abundantly in the range of 20~28$^{\circ}C$. When stem segments o(30 cm long) of the water chestnut were inoculated with the conidial suspension of E. nematorporus, the mean conidial number attacted amounted to 2,545 conidia. Out of 2545 conidia attacted to the stem pieces, 1,733 (68%) conidia formed appressoria. When these stem pieces were treated for 24 hr at 28$^{\circ}C$ under dew condition, 183,1 (7.2%) lesions were formed 10 days after incubation. The time necessary for the death of the plants was about 24 days. Appressoria were formed at 15~35$^{\circ}C$, but decreased rapidly in their numbers at the temperature lower than 1$0^{\circ}C$ or at 35$^{\circ}C$. The appressoria formation seemed to be depended on the dew duration, which was effective to the lesion formation and plant mortality. Under dew duration of 16~24 hr with temperature range of $25^{\circ}C$ to 3$0^{\circ}C$, the weed control was increased up to 93.9%. There were no differences between the first and second or third dew treatments. A delay of 2 or 3 days in dew treatment did not increase the mortality of plants. For the use of E. nematosporus as a mycoherbicide of water chestnut, a conidial suspension should be applied when dew conditions are kept for 12 hr after inoculation.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.600-610
• /
• 1995

When combustion gas is cooled down below the dew point of sulfuric acid vapor in the heat recovery systems, condensation occurs. Since the condensed sulfuric acid solution causes low-temperature corrosion in materials, it is important to measure the SOx dew point by electric measurement. In this study, two kinds of probes having electric gaps of 1mm or 2mm were used. and experiments were carried out by the parameters of sulfuric acid vapor and water vapor concentration. The changes of electric current caused by sulfuric acid condensed on the surface of probe according to the cooling rate and the probe head surface temperature were sudied. The opimum cooling rate was decreased with the increasing of water vaper concentration regardless of sulfuric acid concentration. The sensitivity of electric current is improved for the narrower gap(1mm) of ring electrodes, but it rarely affects the SOx dew point measuring of different probes according to the change of cooling rate.