• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.60-60
• /
• 2006

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.65-80
• /
• 2007

The input and output device requires precise color representation and CMS (Color Management System) because of the increasing number of ways to apply the digital image into electronic publishing. However, there are slight differences in the device dependent color signal among the input and output devices. Also, because of the non-linear conversion of the input signal value to the output signal value, there are color differences between the original copy and the output copy. It seems necessary for device-dependent color information values to change into device-independent color information values. When creating an original copy through electronic publishing, there should be color management with the input and output devices. From the devices' three phases of calibration, characterization and color conversion, the device-dependent color should undergo a color transformation into a device-independent color. In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After undergoing a color transformation in the input and output devices, the best results were created when the original target underwent a color transformation by the scanner and digital camera input device by the linear multiple regression, and the LCD output device underwent a color transformation by the GOG model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.236-239
• /
• 2003

The spent fuel slitting device is an equipment developed in order to feed UO$_2$pellet to the dry pulverizing/mixing device. In this study, we have compared and analyzed the handling method of the slitting and that of the pellet and hull, processing time, separating time for 20kgHM, the number of blades, on the existing slitting device using in DUPIC, and spent fuel management technology research and test facility. Also, we have compared and analyzed about an advantage and weak point, designing and producing, processing, establishment, operation, maintenance about the vertical and horizontal slitting device. Based on these results, we have developed the vertical slitting device. By using the results, we have enhanced the slitting processing time(over 40%)in comparison with DUPIC device, and it will is effectively applied to available data for designing and producing of the hot test facility.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.229-235
• /
• 2006

High speed PC-based DIO(Digital I/O) system that consists of a master device and slave I/O devices is developed. The PCI interfaced master device controls all of serial communications, reducing the load on the CPU to a minimum. The slave device is connected from the master device and another slave device is connected to the slave device, it can repeated to maximum 64 slave devices. The slave device has 3 types I/O mode, such as 16 bits input-only, 16 bits output-only, and 8bits input-output. The master device has 2 rings which can take 64 slaves each. Therefore, total I/O points covered by the master is 2048 points. The slave features 3 types of input/output function interchangeability by DIP switch settings. Library, application, and device driver software for the DIO system that have a secure and a convenient functionality are developed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.344-345
• /
• 2022

ogy is being used in many fields, such as smart farms, smart oceans, smart homes, and smart energy. Various IoT terminals are used for these IoT services. Here, IoT devices are physically installed in various places. A malicious attacker can access the IoT service using an unauthorized IoT device, access unauthorized important information, and then modify it. In this study, to solve these problems, we propose an authentication system for IoT devices used in IoT services. The IoT device authentication system proposed in this study consists of an authentication module mounted on the IoT device and an authentication module of the IoT server. If the IoT device authentication system proposed in this study is used, only authorized IoT devices can access the service and access of unauthorized IoT devices can be denied. Since this study proposes only the basic IoT device authentication mechanism, additional research on additional IoT device authentication functions according to the security strength is required.IoT technol

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.739-742
• /
• 1997

A remote drum grappling device coupled to the anti-swing crane has been developed by KAERI to cope with problems involved in manually treating low level waste drums. In order for this grappling device to be operated effectively, multi-sensors including CCD camera were employed. As an activity representation scheme of the device, Extended State Machine (ESM) was used to descibe its operation sequences. The performance testing of the device was conducted successfully, and consequently its application could be extendable to industrial operation environment.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.77-82
• /
• 2020

IoT devices frequently require input resources to communicate with various sensors or IoT platforms. IoT device wastes a lot of time as idle time or waiting time to check the data of the input resource and use the input resource. In addition, IoT devices use various input resources. We compares and analyzes input idle time and input waiting time generated from hardware serial input resource, software serial input resource, digital port input resource, and analog port input resource using Arduino widely used as IoT device. In order to design the IoT device framework, it is necessary to understand the characteristics of input resources and to design them to minimize unnecessary input idle time and input waiting time. The analog input wait time has a much larger input wait time than the digital input wait time, so it must be designed to receive analog information periodically at the appropriate timing. The characteristics of the input resources analyzed in this way help to design an efficient IoT device.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.203-208
• /
• 2009

Recently, improved capabilities of the mobile device is represented in a demand for same level services with the desktop device services but the service that is developed for desktop device is not compatible with mobile devices. To fulfill these demands, it is needed to provide services with considering features of mobile devices. This means that CP(Contents Provider) must do contents transformation in order to make suitable contents on mobile device. For managing some information that is required to do contents transformation, we need the DDR(Device Description Repository) which can store and search a variety of device information to grasp the constraints on the mobile device as compared with desktop devices. Also, defining standard API is required to offer a service regardless of platforms. Hereupon W3C(World Wide Web Consortium) introduced DDR Simple API. However that specifies the limited functions of DDR, which is inevitable to be added for more precise search services. In this paper, we expanded DDR Simple API and implemented DDR that supports DDL(Device Description Language) conversion and storing and searching device information.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.603-610
• /
• 2018

This study examined the following: accuracy of the exposure conditions in the inverter device and three-phase device; output waveform over the exposure conditions; and average and standard deviation of the output waveform. After assessing whether the dose corresponding to the theoretical dose was presented, the following conclusions were obtained: 1. The accuracy of the tube voltage(kVp) and tube current(mA) exposure time(sec) was within the tolerable level prescribed in Korea's Safety Management Standards. In the error, Inverter device was large the tube voltage and exposure time, the three-phase device was large the tube current. 2. In terms of the output waveform of the exposure conditions and the average and standard deviation of the output waveform, the higher tube voltage and larger tube current resulted in greater standard deviation in pulsation. Moreover, the standard deviation of pulsation was shown to be greater in the inverter device than the three-phase device; there was also greater standard deviation in the inverter device considering the exposure time. 3. Regarding the exposure conditions over the output dose, all linearity showed the coefficient of variation which had an allowable limit of error within 0.05. Although the output dose ratio for the inverter device was 1.00~1.10 times no difference that of the three-phase device, there was almost no difference in dose ratio between the tube currents.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.580-592
• /
• 2009

Objectives : This study had been performed for Respondents who live in Daegu and Kyungbuk province Age group of 30 to 50 years old. Methods : The oral health state and oral heath care, dental treatments about the use of oral hygiene devices were obtained through self-administering questionnaires from 2 to 31, January, 2009. Results : 1. The toothpick was well known for respondents and automatic brush, gargle, dental floss were practically used. 2. 57.1% of man know oral hygiene device, they know more about oral hygiene device if they have higher degree, and they use more if they are older than others. 3. 55.5% of respondents who think their oral health condition is not healthy enough recognize oral hygiene device, 77.5% of respondents who visited dental clinic around six month recognize oral hygiene device. 82.4% of respondents who had been follow-up. 86.1% of respondents who think their oral health state is good enough doesn't use oral hygiene device, oral hygiene device was used more for respondents who visited dental clinic frequently. 47.1% of respondents who visited dental clinic periodically use oral hygiene device. 4. Respondents who experience implant recognize more about oral hygiene device and periodontal Tx, orthodontics problem, preservative treatment were next. 5. 60.0% of respondents who were educated tooth brushing method recognize it. Oral hygiene device was frequently used if tooth brushing time were increased. 26.4% of respondents who were changed their tooth brushing method used oral hygiene device. Conclusions : Their recognition level was practically low whose age is around 30 to 50. Their oral hygiene device use ratio is higher then others who were educated tooth brush method so that I think we need to recommend for use oral hygiene device and use method.