• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.86-94
• /
• 2016

In this paper, position control of focal plane compensation device using piezoelectric actuator is conducted. The forcal plane compensation device installed on earth observation satellite camera compensates micro-vibration from reaction wheels. In this study, four experimental models of the open-loop compensation device are derived using MATLAB system identification toolbox in the input range of 0~50Hz. Subsequently, the PID controller for each model is designed and the performance test of each controller is conducted through MATLAB/Simulink. According to frequency response analysis of the closed-loop compensation device system, the PID controller designed for 38~50Hz input range has enough tracking performance for the whole 0~50Hz input range. The maximum output error is about $1{\mu}m$ for the input range. The simulation results has been verified by the experimental method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.416-423
• /
• 2012

Liquid acquisition device in the liquid propellant supply system is required to protect entrance of gas bubble into the propulsion system. The device exploits the capillary effect of micro-sized poles in a screen and supplies pure liquid-phase propellant to the propulsion system. The bubble point is the most important performance parameter in the design of a liquid acquisition device. In this paper, performance parameters affecting the bubble point are identified through literature survey, in order to develop the experimental setup for the bubble point measurement.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.8
• /
• pp.801-810
• /
• 2004

It is only 2 ~ 3 years in the interior to be introduced as a Ubiquitous era after going through mainframe, PC and internet era on account of the advent of computer. This thesis intends to present a model device of an epoch-making cash management system using the RFID(Radio Frequency Identification) Tag and EPC (Electronic Product Code) Platform which are core technologies of the Ubiquitous Computing on the assumption that cable and wireless internet is constructed in university. Also this sets up a purpose to minimize the administrative procedure as well as the waste of time, people and cost which are problems of the cash management system operating now. Therefore as a research project hereafter, it will be able to present an imporvement device about the problems which cannot solve these days through the model of the proposing cash management system when the standardization, normalization and commercialization of advanced IT department are accomplished.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.132-139
• /
• 2022

The development of the fourth industrial revolution and logistics 4.0 related technology, the growth of the e-commerce market, and the transition to a non-face to face society due to the pandemic are accelerating the growth of the logistics industry. Due to the growth of the logistics industry, various services are emerging to meet the requirements of the market, and research and technology development related to the parcel storage, which is an important element of the last mile service, is also underway. In the past, if it was difficult to deliver the goods directly to the recipient, the parcel storage installed near the delivery location was used, but the usability was not good and the storage of the goods was limited. In addition, the existing parcel storage has a lot of functional limitations compared to the advanced logistics technology, so it is necessary to develop a device that improves it. Therefore, this study conducted to secure safety for unmanned parcel storage devices with robot technology to improve usability and functionality in line with the advanced logistics industry. Based on ISO 10218, an industrial robot related standard, risk identification studies were conducted to derive results that contribute to the development of devices under development.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1703-1707
• /
• 2013

A fast and simple sampling and sample preparation device, (NTD) has been developed and applied to sample and analyze volatile components from ground coffee beans. Coffee fragrances and other volatile organic compounds (VOCs) were sampled by the NTD and then analyzed by gas chromatograph-mass spectrometry (GC/MS). Divinylbenzene (DVB) particles (80/100 mesh size) were the sorbent bed of the NTD. More than 150 volatile components were first identified based on the database of the mass library and then finally 30 fragrances including caffeine were further confirmed by comparing experimental retention indices (i.e. Kovat index) with literature retention indices. Total sampling time was 10 minutes and no extra solvent extraction and/or reconstitution step need. Straight n-alkanes (C6-C20) were used as retention index probes for the calculation of experimental retention indices. In addition, this report suggests that an empty needle can be an alternative platform for analyzing polymers by pyrolysis-GC/MS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.90-93
• /
• 1994

A surface acoustic wave(SAW) sensor for the detection of odorants has been constructed by depositing various phospholipids and fatty acids onto the surface of the SAW device. Applying the Langmuir-Blodgett technique. it was possible to deposit the optimal number of layer which was found to be between 10 and 20. The characteristics of a SAW device operating at 310 MHz deposited with phosphatidyl choline were analysed. Menthone, amylacetate, acetion, and other organic gases sho7\\\\`ed different affinities to the coated lipids. An explanation is given for differant odorant affinities based on the monolayer properties of phospholipids. The identification of odorants depending on the type of lipid used for coating is discussed in terms of a comparison of their normalized resonant frequency chi It pat terns. Using a number of different lipid-coated SAW devices. odorants can be identified by a computerized pattern recognition algorithm.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.11a
• /
• pp.226-233
• /
• 2005

Ubiquitous computing is a study area explained in a myriad of contexts and technological terms. So when you try to define it with simple words, it gets even more confusing. Payment. however, refers in nature to an act of money transfer from one entity to another, and it is obvious that a payment method will be valued as long as the transaction can be completed with safety no matter what technology was used. In the end, the key to U-payment is convenience and security in the transfer of financial information. The purpose of this paper is to find a desirable U-payment scheme by looking at the characteristics of seamlessness under the ubiquitous environments, Strong Personal Device, and peer-based if information transactions. We also propose U-SDT Protocol integrating critical technologies such as Radio Frequency Identification (RFID), Bluetooth, Personal Payment Device, Account Managing Application and Transaction ID as a way to make transactions between users seamless and secure better privacy protection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.757-764
• /
• 2015

Mathematical modeling of focal plane compensation device in the small earth-observation satellite camera has been conducted experimently for compensation of micro-vibration disturbance. The PZT actuators are used as control actuators for compensation device. It is quite difficult to build up mathematical model because of hysteresis characteristic of PZT actuators. Therefore, the compensation device system is assumed as a $2^{nd}$ order linear system and modeled by using MATLAB System Identification Toolbox. It has been found that four linear models of compensation device are needed to meet 10% error in the input frequency range of 0~50Hz. These models describe accurately the dynamics of compensation device in the 4 divided domains of the input frequency range of 0~50Hz, respectively. Micro-vibration disturbance can be compensated by feedback control strategy of switching four models appropriately according to the input frequency.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.269-274
• /
• 2022

An artificial neural network (ANN) that identifies radionuclides from low-count gamma spectra of a NaI scintillator is proposed. The ANN was trained and tested using simulated spectra. 14 target nuclides were considered corresponding to the requisite radionuclide library of a radionuclide identification device mentioned in IEC 62327-2017. The network shows an average identification accuracy of 98.63% on the validation dataset, with the gross counts in each spectrum N_c = 100~10000 and the signal to noise ratio SNR = 0.05-1. Most of the false predictions come from nuclides with low branching ratio and/or similar decay energies. If the N_c>1000 and SNR>0.3, which is defined as the minimum identifiable condition, the averaged identification accuracy is 99.87%. Even when the source and the detector are covered with lead bricks and the response function of the detector thus varies, the ANN which was trained using non-shielding spectra still shows high accuracy as long as the minimum identifiable condition is satisfied. Among all the considered nuclides, only the identification accuracy of ²³⁵U is seriously affected by the shielding. Identification of other nuclides shows high accuracy even the shielding condition is changed, which indicates that the ANN has good generalization performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.199-204
• /
• 2017

In this study, we present a home appliance load identification algorithm. The algorithm utilizes complex sensory data in order to improve the existing NIALM using total power usage information. We define the influence graph between the appliance status and the measured sensor data. The device identification prediction result is calculated as the weighted sum of the predicted value of the sensor data processing algorithm and the predicted value based on the total power usage. We evaluate proposed algorithm to compare appliance identification accuracy with the existing NIALM algorithm.