• Title/Summary/Keyword: Developed pattern

Search Result 3,768, Processing Time 0.028 seconds

Punching Shear Failure in Pile-Supported Embankments (말뚝으로 지지된 성토지반 내 펀칭전단파괴)

  • Hong, Won-Pyo;Song, Jei-Sang;Hong, Seong-Won
    • Journal of the Korean Geotechnical Society
    • /
    • v.26 no.3
    • /
    • pp.35-45
    • /
    • 2010
  • The mechanism of load transfer by punching shear in pile-supported embankments is investigated. Based on the geometric configuration of the punching shear observed in sand fills on soft ground, a theoretical analysis is carried out to predict the embankment loads transferred on a cap beam according to punching shear developed in pile-supported embankments. The equation presented by the theoretical analysis was able to consider the effect of various factors affecting the vertical loads transferred on the cap beam. The reliability of the presented theoretical equation is investigated by comparing it with the results of a series of model tests. The model tests were performed on cap beams, which had two types of width; one is narrow width and the other is wide width. Sand filling was performed through seven steps. Two types of loading pattern were applied at each filling step; one is the long-term loading, in which sand fills at each filling step were kept for 24 hours, the other is the short-term loading, in which sand fills at each filling step were kept for 2 hours. The vertical loads measured in all model tests show good agreement with the ones predicted by the theoretical equation. Finally, the predicted vertical loads also show good agreement with the vertical loads measured in a well-instrumented pile-supported embankment in field, where cap beams were placed on too wide space.

A Study on the Digital Holographic Image Acquisition Method using Chroma Key Composition (크로마키 합성을 이용한 디지털 홀로그래피 이미지 획득 방법 연구)

  • Kim, Ho-sik;Kwon, Soon-chul;Lee, Seung-hyun
    • The Journal of the Convergence on Culture Technology
    • /
    • v.8 no.3
    • /
    • pp.313-321
    • /
    • 2022
  • As 5G is getting developed, people are getting interested in immersive content. Some predicts that immersive content may be implemented in real life such as holograms, which were only possible in movies. Holograms, which has been studied for a long time since Dennis Gabor published the basic theory in 1948, are constantly developing in a new direction with digital technology. It is developing from a traditional optical hologram, which is produced by recording the interference pattern of light to a computer generated hologram (CGH) and a digital hologram printer. In order to produce a hologram using a digital hologram printer, holographic element (Hogel) image must first be created using multi-view images. There are a method of directly photographing an actual image and a method of modeling an object using 3D graphic production tool and rendering the motion of a virtual camera to acquire a series of multi-view images. In this paper, we propose a new method of getting image, which is one of the visual effect, VFX, producing multi-view images using chroma key composition. We shoot on the green screen of actual object, suggest the overall workflow of composition with 3D computer graphic(CG) and explain the role of each step. We expected that it will be helpful in researching a new method of image acquisition in the future if all or part of the proposed workflow to be applied.

A Survey on Korean Medicine Doctors' Recognition and Treatment for Developing Korean Medicine Clinical Practice Guideline of Female Infertility (여성 난임 한의표준임상진료지침 개작을 위한 한의사의 인식과 치료에 관한 실태조사)

  • Hyo-Jeong Jung;Dong-Il Kim;Su-Ji Choi;Su-In Hwang;Young-Jin Yoon;Jang-Kyung Park
    • The Journal of Korean Medicine
    • /
    • v.43 no.3
    • /
    • pp.122-138
    • /
    • 2022
  • Objectives: This study was conducted to develop a Korean Medicine(KM) Clinical Practice Guidelines(CPG) of female infertility. We conducted this questionnaire survey to reflect the experiences of Korean Medicine doctors(KMD) and clinical field in Korea. Method: We sent a questionnaire survey to KMD belonging to the Association of Korean Medicine by e-mail. We received 665 responds, and analyzed the answers. Results: 51.2% of respondents knew the previously developed CPG of female infertility, and 18.3% actually used. 83.3% agreed about the necessity of CPG of female infertility, and 80.3% had practical use plan. 90.2% of respondents treated less than 5 infertility woman for a month. 22.7% of respondents treated 50% of patients with collaborative treatment of KM and Western medical treatments. The main age group of patients was '35~40 years'(54.7%), and the most common cause was unexplained infertility(61.7%). The most common pattern identification of female infertility patients was Kidney deficiency(55.4%). KMD used 'a combination of decoction of herbal medicine, acupuncture and moxibustion treatment' the most(43%), and 'a decoction of herbal medicine treatment alone' was next(35%). 84.2% conducted lifestyle modification education about diet, stress, exercise etc. Conclusion: We figured out Korean Medicine doctors' recognition about CPG of female infertility, preference of treatments, and also characteristics of patients visiting Korean Medical clinics to make a practical CPG reflecting clinical situation.

Seismic performance assessment of single pipe piles using three-dimensional finite element modeling considering different parameters

  • Duaa Al-Jeznawi;Jitendra Khatti;Musab Aied Qissab Al-Janabi;Kamaldeep Singh Grover;Ismacahyadi Bagus Mohamed Jais;Bushra S Albusoda;Norazlan Khalid
    • Earthquakes and Structures
    • /
    • v.24 no.6
    • /
    • pp.455-475
    • /
    • 2023
  • The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

Numerical Simulations of Cellular Secondary Currents in Open-Channel Flows using Non-linear k-ε Model (비선형 k-ε 모형을 이용한 개수로 흐름에서의 격자형 이차흐름 구조 수치모의)

  • Kang, Hyeongsik;Choi, Sung-Uk;Park, Moonhyeong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.6B
    • /
    • pp.643-651
    • /
    • 2008
  • In the present paper, turbulent open-channel flows over longitudinal bedforms are numerically simulated. The Reynolds- averaged Navier-Stokes equations in curvilinear coordinates are solved with the non-linear $k-{\varepsilon}$ model by Speziale( 1987). First, the developed model is applied to rectangular open channel flows for purposes of model validation and parameter sensitivity studies. It is found that the parameters $C_D$ and $C_E$ are important to the intensity of secondary currents and the level of turbulent anisotropy, respectively. It is found that the non-linear $k-{\varepsilon}$ model can hardly reproduce the turbulence anisotropy near the free surface. However, the overall pattern of the secondary currents by the present model is seen to coincide with measured data. Then, numerical simulations of turbulent flows over longitudinal bedforms are performed, and the simulated results are compared with the experimental data in the literature. The simulated secondary currents clearly show upflows and downflows over the ridges and troughs, respectively. The numerical results of secondary currents, streamwise mean velocity, and turbulence structures compare favorably with the measured data. However, it is observed that the secondary currents towards the troughs were significantly weak compared with the measured data.

Three-Dimensional Numerical Simulations of Open-Channel Flows with Alternate Vegetated Zones (교행식생 영역을 갖는 개수로 흐름에서의 3차원 수치모의)

  • Kang, Hyeongsik;Kim, Kyu-Ho;Im, Dongkyun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.3B
    • /
    • pp.247-257
    • /
    • 2009
  • In the present paper, turbulent open-channel flows with alternate vegetated zones are numerically simulated using threedimensional model. The Reynolds-averaged Navier-Stokes Equations are solved with the ${\kappa}-{\varepsilon}$ model. The CFD code developed by Olsen(2004) is used for the present study. For model validation, the partly vegetated channel flows are simulated, and the computed depth-averaged mean velocity and Reynolds stress are compared with measured data in the literature. Comparisons reveal that the present model successfully predicts the mean flow and turbulent structures in vegetated open-channel. However, it is found that the ${\kappa}-{\varepsilon}$ model cannot accurately predict the momentum transfer at the interface between the vegetated zone and the non-vegetated zone. It is because the ${\kappa}-{\varepsilon}$ model is the isotropic turbulence model. Next, the open channel flows with alternate vegetated zones are simulated. The computed mean velocities are compared well with the previously reported measured data. Good agreement between the simulated results and the experimental data was found. Also, the turbulent flows are computed for different densities of vegetation. It is found that the vegetation curves the flow and the meandering flow pattern becomes more obvious with increasing vegetation density. When the vegetation density is 9.97%, the recirculation flows occur at the locations opposite to the vegetation zones. The impacts of vegetation on the flow velocity and the water surface elevation are also investigated.

The Effect of Eating with Others on Depression among Community-dwelling Older Adults by Family Arrangement (가구 유형별 동반식사가 노인의 우울에 미치는 영향)

  • Lee, Hyojin;Yoon, Ju Young
    • 한국노년학
    • /
    • v.39 no.3
    • /
    • pp.415-427
    • /
    • 2019
  • This study examined the effects of eating with others on depressive symptoms among the community-dwelling older adults by family arrangement, using the Korea National Health and Nutrition Examination Survey 7th (2016). A total of 1,233 older adults aged over 65 was included in this analysis. Eating status (alone / with others) and family arrangement (living alone / living with family) were dichotomized based on the original questionnaire. Among 955 older adults who live with family members, 855 persons (89.5%) eat together and 100 persons (10.5%) eat alone. Among 278 older adults who live alone, 86 persons (30.9%) eat together and 69 persons (69.1%) eat alone. Regression analysis controlling for demographic and health related factors, eating with others was significantly related to lower levels of depressive symptoms in the group of older adults who live with family members (β = -1.663, p <.001), while there is no statistical significance (β = -0.856, p = .148) in the counterpart. Therefore, various types of community-based programs need to be developed to encourage older adults to eat with other in their ordinary lives. It is also recommended that the community has to offer consistent care and support for the elderly particularly who live alone.

Construction of Cham Identity in Cambodia

  • Maunati, Yekti;Sari, Betti Rosita
    • SUVANNABHUMI
    • /
    • v.6 no.1
    • /
    • pp.107-135
    • /
    • 2014
  • Cham identities which are socially constructed and multilayered, display their markers in a variety of elements, including homeland attachment to the former Kingdom of Champa, religion, language and cultural traditions, to mention a few. However, unlike other contemporary diasporic experience which binds the homeland and the host country, the Cham diaspora in Cambodia has a unique pattern as it seems to have no voice in the political and economic spheres in Vietnam, its homeland. The relations between the Cham in Cambodia and Vietnam seem to be limited to cultural heritages such as Cham musical traditions, traditional clothing, and the architectural heritage. Many Cham people have established networks outside Cambodia with areas of the Muslim world, like Malaysia, Indonesia, southern Thailand and the Middle Eastern countries. Pursuing education or training in Islam as well as working in those countries, especially Malaysia has become a way for the Cham to widen their networks and increase their knowledge of particularly, Islam. Returning to Cambodia, these people become religious teachers or ustadz (Islamic teachers in the pondok [Islamic boarding school]). This has developed slowly, side by side with the formation of their identity as Cham Muslims. Among certain Cham, the absence of an ancient cultural heritage as an identity marker has been replaced by the Islamic culture as the important element of identity. However, being Cham is not a single identity, it is fluid and contested. Many scholars argue that the Cham in Cambodia constitute three groups: the Cham Chvea, Cham, and Cham Bani (Cham Jahed). The so-called Cham Jahed has a unique practice of Islam. Unlike other Cham who pray five times a day, Cham Jahed people pray, once a week, on Fridays. They also have a different ritual for the wedding ceremony which they regard as the authentic tradition of the Cham. Indeed, they consider themselves pure descendants of the Cham in Vietnam; retaining Cham traditions and tending to maintain their relationship with their fellow Cham in Central Vietnam. In terms of language, another marker of identity, the Cham and the Cham Jahed share the same language, but Cham Jahed preserve the written Cham script more often than the Cham. Besides, the Cham Jahed teaches the language to the young generation intensively. This paper, based on fieldwork in Cambodia in 2010 and 2011 will focus on the process of the formation of the Cham identity, especially of those called Cham and Cham Jahed.

  • PDF

Development of the Large-Capacity Mooring Fittings according to MEG4(Mooring Equipment Guideline 4) (MEG4(Mooring Equipment Guideline 4) 적용에 따른 대용량 무어링 피팅 개발)

  • Myung-Su Yi;Kwang-Cheol Seo;Joo-Shin Park
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.29 no.7
    • /
    • pp.950-957
    • /
    • 2023
  • For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

Investigation of Microorganism-Based Autonomous Crack Healing Agent and Full-scale Verification of Crack Healing (미생물 기반 자발적 콘크리트 균열치유제 성능 분석 및 실스케일 균열치유성능 검증)

  • Yeon-Jun Yoo;Byung-Jae Lee;Joo-Kyoung Yang;Yun Lee
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.27 no.6
    • /
    • pp.138-143
    • /
    • 2023
  • In this study, the crack healing performance of each crack healing agent manufacturing method was analyzed by adding crack healing agents in the form of alginate gel and spore suspension inoculated with endospores of calcium carbonate-forming bacteria to mortar. In addition, by applying it to an full-scale structure in the form of a box-type culvert, we attempted to create an environment in which the developed crack healing agent can be applied not only to a laboratory environment but also to an actual field. The crack healing agent using the dry heat drying method showed crack healing performance, but in the case of the freeze drying method, many spores were killed by freeze hardening and therefore the crack healing performance was lost. As a result of SEM and XRD pattern analysis of the presumed crack healing material extracted from the crack of a full-scale structure, it was found to be calcite, one of the calcium carbonate crystals produced by microorganisms applied to the crack healing agent. In conclusion, it was found that the crack healing by microorganisms can be implemented in a real structure.