• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2488-2492
• /
• 2010

A method is described for the determination of the Po nuclides in a water sample. After the Po nuclides were purified from interfering elements in a water sample using a manganese dioxide precipitation followed by a solvent extraction method, the Po nuclides were deposited onto the silver plate. A large volume of the water sample was effectively pretreated with manganese dioxide precipitation method. To determine the optimum conditions for plating Po, the effects of the pH, volume, temperature and time on the Po deposition were investigated in hydrochloric acid solution. The investigated determination method of Po nuclides with solvent extraction was applied to a tap water sample.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1452-1460
• /
• 2001

A new method of parameter determination in the fatigue residual strength degradation model is proposed. The new method and minimization technique is compared experimentally to account for the effect of tension-compression fatigue loading of spheroidal graphite cast iron and graphite/epoxy laminate. It is shown that the correlation between the experimental results and the theoretical prediction on the fatigue life and residual strength distribution using the proposed method is very reasonable. Therefore, the proposed method is more adjustable in the determination of the parameter than minimization technique for the prediction of the fatigue characteristics.

• 대한화학회지
• /
• 제5권1호
• /
• pp.84-87
• /
• 1961

A polarographic method for rapid determination of Uranium in the presence of foreign ions was proposed. The method is based on the measurement of polarogram in the sulfuric acid as supporting electrolyte. In this medium Uranyl ions give well defined reduction waves, and half-wave potentials are -0.19V vs. S.C.E. as first wave, and uncertain volt. vs. S.C.E. as second wave in $2.4 N-H_2SO_4.$ The first wave has a linear relationship between the concentration of Uranyl ion and wave height. The author also studied a method for rapid determination of Uranium in Korean monazite sand without eliminating the foreign ions. The Korean monazite sands were analyzed by this method and satisfactory result were obtained.

• Earthquakes and Structures
• /
• 제25권4호
• /
• pp.249-267
• /
• 2023

Various methods for determining the damping ratio have been proposed by scholars both domestically and abroad. However, no comparative analysis of different determination methods has been seen yet. In this study, typical sand (Fujian standard sand) and cohesive soils were selected as experimental objects, and undrained strain-controlled dynamic triaxial tests were conducted. The differences between existing damping ratio determination methods were theoretically compared and analyzed. The results showed that the hysteresis curve of cohesive soils had better symmetry and more closely conformed to the definition of equivalent linear viscoelasticity. For non-cohesive soils, the differences in damping ratio determined by six methods were significant. The differences decreased with increasing confining pressure and relative density, but increased gradually with increasing shear strain, especially at high shear strains, where the maximum relative error reached 200%. For cohesive soils, the differences in damping ratio determined by six methods were relatively small, with a maximum relative error of about 50%. Moreover, they were less affected by effective confining pressure and had the same changing trend under different effective confining pressures. The damping ratio determination method has a large effect on the seismic response of soils distributed by non-cohesive soils, with a maximum relative error of about 15% for the PGA and up to about 30% for the Sa. However, for soil layers distributed by cohesive soils, the damping ratio determination method has less influence on the seismic response. Therefore, it is necessary to adopt a unified damping ratio determination method for non-cohesive soils, which can effectively avoid artificial errors caused by different determination methods.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.149-156
• /
• 2014

최근 들어, 다층 건물 내 층간 위치 측위(Floor Determination)는 다양한 위치 기반 응용 서비스를 만족하기 위해 빠르게 해결해야 되는 문제가 되었다. 본 논문에서는 다층 건물 환경에서 Wi-Fi 신호를 기반으로 한 저복잡도 층간 위치 측위 기법을 제안한다. 제안 기법에서는 WAP(Wireless Access Point)에 대한 자세한 좌표 정보가 필요 없이, 사용자 단말기에 나온 각 WAP의 층수와 각 WAP의 수신 신호 세기(Received Signal Strength) 값만을 이용한다. 제안 기법의 성능을 검증하기 위해 본 논문에서는 Multi-Wall-Floor 모델을 사용하였으며, 모의실험 결과를 통해 각층의 WAP 배치 밀도가 충분히 높을 경우 제안 기법의 정확도가 100%에 도달함을 보였다. 그리고 각층의 WAP 수가 적은 경우에서도 우수한 층간 위치 측위 성능을 보였으며, 특히 심지어 WAP 가 하나도 없는 층이 있어도 층간 위치 측위가 가능한 것을 보임으로써 제안된 기법의 우수성을 확인하였다.

• 항공우주기술
• /
• 제10권2호
• /
• pp.170-176
• /
• 2011

본 논문에서는 지상국에서 추적한 저궤도 위성의 방위각 및 고도각을 관측자료로 이용하여 궤도결정을 수행한 결과를 분석하였다. 지상국 추적 데이터는 발사 후 초기 궤도결정을 위한 관측자료로 유용하게 사용된다. 이를 위해 지상국 추적데이터에 대한 표준 인터페이스 포맷을 정리하였고, 특정 지상국에 대한 추적 데이터의 통계적인 특성을 살펴보았다. 최소자승법을 이용한 궤도결정을 위해 연속되는 교신패스를 통해 얻은 아리랑 2호의 방위 각/고도각을 축적하여 관측자료로 이용함으로써 다양한 조합에 따른 궤도결정 결과를 분석하였고, 궤도결정 성능 검증을 위해 GPS 항행해를 이용한 궤도결정 값과 비교하였다.

• 방사성폐기물학회지
• /
• 제2권1호
• /
• pp.35-40
• /
• 2004

Final disposal of radioactive waste generated from Nuclear Power Plant (NPP) requires the detailed information about the characteristics and the quantities of radionuclides in waste package. Most of these radionuclides are difficult to measure and expensive to assay. Thus it is suggested to the indirect method by which the concentration of the Difficult-to-Measure (DTM) nuclide is estimated using the correlations of concentration - it is called the scaling factor - between Easy-to-Measure (Key) nuclides and DTM nuclides with the measured concentration of the Key nuclide. In general, the scaling factor is determined by the log mean average (LMA) method and the regression method. However, these methods are inadequate to apply to fission product nuclides and some activation product nuclides such as 14$^{C}$ and 90$^{Sr}$ . In this study, the artificial neural network (ANN) method is suggested to improve the conventional SF determination methods - the LMA method and the regression method. The root mean squared errors (RMSE) of the ANN models are compared with those of the conventional SF determination models for 14$^{C}$ and 90$^{Sr}$ in two parts divided by a training part and a validation part. The SF determination models are arranged in the order of RMSEs as the following order: ANN model

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.322-327
• /
• 2003

It is important to know the accurate radionuclide inventory of radioactive waste for the reliable management. However, estimation of radionuclide concentrations in drummed radioactive waste is difficult and unreliable because of difficulties of direct detection, high cost, and radiation exposure of sampling personnel. In order to overcome these difficulties, scaling factors (SFs) have been used to assess the activities of radionuclides that could not be directly analyzed. A radionuclide assay system has been operated at KORI site since 1996 and consolidated scaling factor method has played a dominant role in determination of radionuclides concentrations. However, some problems are still remained such as uncertainty of estimated scaling factor values, inaccuracy of analyzed sample values, and disparity between the actual and ideal correlation pairs and the others. Therefore, it needs to improve the accuracy of scaling factor values. The scope of this paper is focused on the improvement of accuracy and representativeness of calculated scaling factor values based on statistical techniques. For the selection of reliable activity determination method, the accuracy of estimated SF values for each activity determination method is compared. From the comparison of each activity determination methods, it is recommended that SF determination method should be changed from the arithmetic mean to the geometrical mean for more reliable estimation of radionuclide activity. Arithmetic mean method and geometric mean method are compared based on the data set in KORI system.

• International Journal of Advanced Culture Technology
• /
• 제5권2호
• /
• pp.63-73
• /
• 2017

In this paper, we propose algorithm for determining the static and dynamic posture using the acceleration sensor of smartphone. The measured acceleration values are then analyzed according to a preprocessing to the respective axis (X, Y, Z) and posture (standing, sitting, lying) presents static posture determination criterion. The proposed static posture determination condition is used for static posture determination and dynamic posture determination. The dynamic posture is determined by using regression linear equations. In addition, transition state can be grasped by SVM change in dynamic posture determination. Experimental results are presented using data and app. Experiments were performed using data collected from 10 adults.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1259-1261
• /
• 2003

The vehicle's heading angle determination is formulated and the proposed method based on geometry engages the magnetometer and the GPS. The resulting maximum determination accuracy of 0.3deg over the entire earth as a standard deviation is obtained for a magnetometer with measurement error of 1nT.