• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.349-360
• /
• 2010

The Yeongsheon Sinwoldong three-storied stone pagoda (Treasure No. 465) composed mainly of drusy alkali-granite. The major rock-forming minerals are biotite, quartz, amphiboles, orthoclase and plagioclase. Yellowish brown and black discoloration are formed at the eight sculpture Buddha of the stylobate. A broken rock fragments in the roof material were repaired using epoxy resin and cement mortar in the past. As a result of the infrared thermography analysis from the pagoda, cracks and exfoliation were not serious. Also, P-XRF analysis showed that concentration of Fe (mean 5,599ppm) and S (mean 3,270ppm) were so high in yellowish discoloration parts. Black discoloration area was detected highly Mn (mean 2,155ppm) concentration around the eight sculpture Buddha of the stylobate. The main reason for these are inorganic contaminants from disengaged rock ingredient and organic contaminants from withered plant body. Degree of physical weathering is relatively high in the southern and northern side. The eastern and western side had similar with weathering condition. The northern and eastern side were serious discoloration and biological weathering relatively. Therefore, we suggest that the pagoda need to do cleaning of biological contaminant and conservation treatment to weakened materials of rock and long term monitoring.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1977

The sample persimmons were obtained from the of Yung-am Kun, Korea on October 24, and November 9, 1973. These persimmons were kept at room temperature overnight, then packed and stored on the following day at $0^{\circ}C$ and $85{\sim}100%$ humidity. Seven experimental items were studied : 1. control, 2. packing with excelsior in wooden boxes, 3. packing with rice hull in wooden boxes, 4. packing in bags of 0.03 mm polyethylene membrane, 5. packing in bags of 0.06 mm polyethylene membrane, 6. packing in bags of 0.08 mm polyethylene membrane, 7. packing in sealed desiccators. The dimension of polyethylene bags were $14{\times}28cm$ and three persimmons were packing in each bag. The results are as follows: 1. The persimmons both in polyethylene bags and in desiccators lost only 1 % or less of weight, while in control (1) packing with excelsior (2) or with rice hull (3) the loss was 6-7 % in weight after $2{\sim}3$ months. The persimmons became visibly shriveled and spongy-like in it's texture when it lost 5 % of weight. 2. Carbon dioxide content within the polyethylene bags and desiccators rapidly increased during the early storage period, and reached 5 % (in 0.03 mm polyethylene bags) to 50 % or more (in desiccator) after 1 month. In the polyethylene bags of 0.08 mm and desiccator, the carbon dioxide accumulated to a dangerous level and the persimmon showed physiological damage in a longer storage period. 3. The advance of after-ripening and deterioration of persimmon sealed in the polyethylene bags was slower than that in open bags when moved out to room temperature from the chilling and the polyethylene bags of 0.06 mm retarded the after-ripening most effectively. 4. On the basis of these results, a temperature of $0^{\circ}C$, relative humidity of almost $85{\sim}100%$ and combinations of 5 % oxygen and $5{\sim}8%$ carbon dioxide seem to be the optimum condition for the storage of persimmon (Teabong-Si). The most successful method of storing was to pack them in polyethylene bags of 0.06 mm and then to store them at $0^{\circ}C$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1976-1985
• /
• 2015

The amount of packets in palyout buffer of video streaming receiver can be changed by network condition, and saturated and exhausted by the delay and jitter. Especially, if the amount of incoming video traffic exceeds the maximum allowed playout buffer, buffer overflow problem can be generated. It makes the deterioration of video image and the discontinuity of playout by skip phenomenon. Also, if the incoming packets are delayed by network confusion, the stop phenomenon of video image is made by buffering due to buffer underflow problem. To solve these problems, this paper proposes the video streaming receiver with token bucket scheme which automatically establishes the important parameters like token generation rate r and bucket maximum capacity c adapting to the pattern of video packets. The simulation results using network simulator-2 (NS-2) and joint scalable video model (JSVM) show that the proposed token bucket scheme with automatic establishment parameter provides better performance than the existing token bucket scheme with manual establishment parameter in terms of the generation number of overflow and underflow, packer loss rate, and peak signal to noise ratio (PSNR) in three test video sequences.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.96-100
• /
• 2016

Metachromatic leukodystrophy (MLD) is a progressive and degenerative neurological disease caused by a deficiency of the catabolic enzyme arylsulfatase A. Deficiency of arylsulfatase A results in accumulation of sulfatide in the white matter of the peripheral and central nervous system and it occurs demyelination as a result. The patient gradually goes through mental and motor failure. General symptoms of MLD include gait disturbance, mental deterioration, muscle rigidity and impaired swallowing. Inheritance of the disease is autosomal recessive. We report a dental caries treatment of a 3-year old boy with MLD. The patient underwent hematopoietic stem cell transplantation (HSCT) to slow the progression of the disease. He was suffered from difficulties of mastication and swallowing from the degenerative neurological symptom. He was ingesting food by both oral feeding and tubal feeding after he took percutaneous endoscopic gastrostomy (PEG). The cause of multiple caries was mainly presumed as patient's prolonged time of meal. The treatment was performed under general anesthesia considering patient's incompliance. Severely affected lower primary molars were treated with pulp treatment and restored with stainless steel crown. Others were restored with composite resin. There were no postoperative complications. MLD is life threatening progressive disease and also has an impact on unfavorable condition for oral health. Routine home oral care and periodic professional dental care should be emphasized to the caregiver of patient considering the susceptibility of dental caries. Not only the medical care, but periodic dental office visit would benefit the quality of life of the patient.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.15-25
• /
• 2019

As the installation of photovoltaic systems increases, fire accidents of PV system grow every year. Most of PV system fires have been reported to be caused by electrical components. The majority of fire accidents occurred in combiner box, which is presumed to be short-circuit accidents due to dustproof and waterproof failures or heat deterioration of blocking diode. For this reason, the blocking diode installation became optional by revised PV combiner regulation. In this paper, according to the revised regulation, reverse current that generated by voltage mismatch was measured and analyzed in PV array without a blocking diode. The factors that cause voltage mismatch in array are assumed to be shaded PV module and short circuit failure of bypass diode. As the result of experiment, there is no reverse current to flow under shading condition in module, but reverse current flows on the failure of bypass diode in module. According to the module's I-V characteristic curve analysis, open voltage was slightly reduced due to operation of bypass diode in shading. However, it showed that open circuit voltage has decreased significantly in the failure of bypass diode. This indicates that the difference in open voltage reduction of voltage mismatch factor causes reverse current to flow.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.751-759
• /
• 2014

Currently, due to global warming, occurrences of extreme climate phenomena such as heat wave, heavy snow, heavy rain, super typhoon are continuously increasing all over the world. Due to these extreme climate phenomena, concrete structures and infrastructures are exposed to serious deterioration and damage. However, researches on construction technologies and standards to confront the climate change generated problems are needed presently. In order to better handle these problems, the validity of the present concrete mixture proportions are evaluated considering wind speed and sunlight exposure time based on climate change record in Seoul, Korea. The specimens cured at various wind speed and sunlight exposure time conditions were tested to obtain their compressive and split tensile strengths at various curing ages. Moreover, performance based evaluation (PBE) method was used to analyze the target strength satisfaction percentage of the concrete cured for the curing conditions. From the probabilistic method of performance evaluation of concrete performance, feasibility and usability of current concrete mix design practice for climate change conditions can be evaluated.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.415-427
• /
• 2011

This study is aiming at estimating the demolition cost of deterioration housing by the rational method in order to provide for the demolition and new build project of the rental multi-family housing of LH. We investigated the actual state of demolition construction and work process of small size housing, and analysed an actual condition of estimation for the demolition cost through an advice by the expert of construction cost estimate. Furthermore, the 'estimation standard for the predetermined amount', 'estimation standard for the disposal cost of construction wastes' and precedent studies in public construction work were considered. As one of results in this study, cost accounting system, breakdown system and construction cost for the demolition work based on the standard of estimate were proposed and the predetermined amount of demolition construction for the multi-family housing with 2 or 3 floors could be produced by them. Eventually, It is estimated that the demolition cost per a multi-family housing is about 18,331,000(won) and 104,000(won) per floorage($m^2$). To the details, the result indicated that the direct demolition cost needs about 14,339,000(won) per a multi-family housing and the consignment disposal cost of wastes needs 3,992,000(won) per one. The results of the study will be used as the fundamental data to estimate the project cost in the phase of budget establishment for demolition and new build project of the deteriorated rental multi-family housings, and also cost accounting system of demolition construction and breakdown system are expect to be used effectively at the ordering of public construction work.

• Journal of Wetlands Research
• /
• v.20 no.3
• /
• pp.219-226
• /
• 2018

Interceptor sewer is installed underground near to the river side mostly ofstate-owned land and the management efficiency of public sewage disposal facilities is decreasing as too much infiltration/inflow(I/I) and river flow to interceptor sewer are caused by broken or deteriorated sewer. This also affects the sewer pipeline project and decreases its efficiency. Therefore, the aim of this study is to investigate interceptor sewer which has influence on the reduction of the project effect. The investigation were performed for three study areas. The study includes the investigation of current condition of interceptor sewer(sewer extension, pipe diameter, pipe type, installed year, installed locations, etc), investigation of inside of sewer by CCTV accompanied by pumping and dredging works where required, investigation of inside of manholes by eyes, calculation of pollutant load using the results of investigation of flow quantity and quality. Multipoint investigations were simultaneously performed for flow quantity at confluence area and other investigations were also performed for flow quantity and BOD for interceptor sewer and comparison of pollutant load, investigation of infiltration/inflow(I/I) caused by deterioration of interceptor sewer. As the result of the study, a main reason for reduced effect of sewer pipe improvement project was analyzed as the low-density sewage and I/I in public seweage treatment Facility due to deteriorated and unmanaged interceptor sewers.