• 대한청각학회지
• /
• 제23권4호
• /
• pp.187-192
• /
• 2019

Background and Objectives: Clear speech is an effective communication strategy used in difficult listening situations that draws on techniques such as accurate articulation, a slow speech rate, and the inclusion of pauses. Although too slow speech and improperly amplified spectral information can deteriorate overall speech intelligibility, certain amplitude of increments of the mid-frequency bands (1 to 3 dB) and around 50% slower speech rates of clear speech, when compared to those in conversational speech, were reported as factors that can improve speech intelligibility positively. The purpose of this study was to identify whether amplitude increments of mid-frequency areas and slower speech rates were evident in Korean clear speech as they were in English clear speech. Subjects and Methods: To compare the acoustic characteristics of the two methods of speech production, the voices of 60 participants were recorded during conversational speech and then again during clear speech using a standardized sentence material. Results: The speech rate and longterm average speech spectrum (LTASS) were analyzed and compared. Speech rates for clear speech were slower than those for conversational speech. Increased amplitudes in the mid-frequency bands were evident for the LTASS of clear speech. Conclusions:The observed differences in the acoustic characteristics between the two types of speech production suggest that Korean clear speech can be an effective communication strategy to improve speech intelligibility.

• 수산경영론집
• /
• 제31권1호
• /
• pp.73-93
• /
• 2000

This study analyzed and mutually compared the fishery manpower problems in Northeast Asia region including Korea, China, Japan by fishery industry structure, fishery education, fishery manpower and presented fishery cooperative schemes of Northeast Asia. In case of fishery manpower problems, China is still in a better situation whereas Korea and Japan have a hard time of a labor shortage. Korean companies have employed foreign crews to find a way out of the difficulties and the foreign crew rate is growing but the problem is that the reduction of Korean crew could deteriorate the safety of vessel-sailing, efficient operations, and fishery efficiency. Therefore crew management should be placed focus on improvement of working conditions and guarantee positions to foreign crew as assistants in fishery surroundings and systems. Fishery manpower problems are complementary to each nation in Northeast Asia. In consideration of this fact, fishery manpower management needs the mutual fishery manpower and information exchange and for the sake of it, the most urgent task is to build up the international fishery cooperative network through establishing fishery-related information systems of Northeast Asia.

• 대한한방내과학회지
• /
• 제25권2호
• /
• pp.368-378
• /
• 2004

In Oriental Medical theory, origin of kidney's weakness or atrophy is shen qi(腎氣) and function of san jiao(三焦) deteriorate, it result in a passage of evacuation is blocked. - In Oriental Medicine, Shen(腎) take charge of storing and evacuating function, by taking qi(氣) of the five viscera and the six bowels. - The cause of reducing of shen qi and san jiao's evacuative function is xu han(Emptiness and Coldness) of the five viscera and the six bowels' activity. So we do not treat only kidney, but we also must focus the five viscera and the six bowels' organic function and ying wei's function. A Renal Failure is similar in symptom to Kwan-kyuk(關格), oliguria or anuria, edema, Hu-son(虛損), Sin-pung(腎風) and Yuk-kuk(六極) in chenxiang(沈香). We grasp symptom of 7 cases of chronic renal failure, and diagnose its pathology based on Sa-jin(四診), and prescribed herbal medicines. And in the point of the chenxiang, we separate two group, Ater one is taken herbal medicine with chenxiang and the other is only taken herbal medicine with no using chenxiang, we compared the rate of treating with only herbal and herbal compounded chenxiang. We repeat medical examination for continuation of effective result, report clinical progress and result which based on this examination.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.336-343
• /
• 2017

Intake air conditions, such as air temperature, pressure, and humidity, are very important parameters that influence engine performance including combustion and emissions characteristics. The purpose of this study is to investigate the effects of intake air temperature on combustion and exhaust emissions characteristics in a single cylinder diesel engine. In this experiment, an air cooler and a heater were installed on the intake air line and a gas flow controller was installed to maintain the flow rate. It was found that intake air temperature induced the evaporation characteristics of the fuel, and it affects the maximum in-cylinder pressure, IMEP(indicated mean effective pressure), and fuel consumption. As the temperature of intake air decreases, the fuel evaporation characteristics deteriorate even as the fuel temperature has reached the auto-ignition temperature, so that ignition delay is prolonged and the maximum pressure of cylinder is also reduced. Based on the increase in intake air temperature, nitrogen oxides(NOx) increased. In addition, the carbon monoxide(CO) and unburned hydrocarbons(UHC) increased due to incomplete fuel combustion at low intake air temperatures.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.105-110
• /
• 2011

Through this study, the performance evaluation on the addition of low-pressure loop EGR(Exhaust Gas Recirculation) in a 6.0 L commercial diesel engine was carried out using WAVE modeling and simulation. Since the key technology of advanced diesel engine combustion such as low-temperature combustion is to steadily supply high rates of EGR in a wide operating range, the current study could be effectively contribute to the design and development processes of up-to-date diesel engine systems as real-world reference data. The current simulation results show that the system in which low-pressure loop EGR is added shows almost 2.3 times increase in maximum EGR rate at 1000 rpm as well as almost 1.6 times increase at 2200 and 1600 rpm in comparison with an engine system employing high-pressure loop EGR only. Also, both turbocharger axis speed and charging pressure level did not deteriorate due to the addition of low-pressure loop EGR at 2200 and 1000 rpm, but they were fairly decreased at 1600 rpm.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.3-8
• /
• 2014

TV 대역에 나타날 수 있는 무선 마이크 신호를 검출하는 방안으로 전력 스펙트럼의 최대값을 시험 통계량으로 사용하는 방안이 최근 발표되었다. 이 방식은 시험 통계량을 임계값과 비교하여 우선 사용자의 유무를 판정하는데, 이때 임계값은 목표로 하는 오경보 확률뿐만 아니라 배경 잡음 전력 수준에 따라 달라진다. 따라서 잡음 전력에 대한 불확실성이 존재하는 경우 그로 인한 성능 저하가 발생할 수 있다. 이에 대한 해결책으로 본 논문은 전력 스펙트럼의 최대값과 최소값의 비율을 시험 통계량으로 사용하는 방식을 제안하고, 그 분석 결과를 제시하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.119-124
• /
• 1996

End milling operation is very important in machining precision components. Deterioration of surface roughness and surface geometry will cause more process for surface finishing. According to the feed rate and the cutting edge geometry, the cusp which is geometrically uncut surface is determined. To reduce the cost for dinishing operation after end milling, the cusp must be remaianed in small size as possible. Due to the cylindrical type of the end mill, tool deflection is one of the main problems in surface generation. The cutting resistance and the rigidity of the end mill will determine the size of tool deflection. One more important factor which deteriorate surface quality comes from the error in manufacturing end mills. Run-out of end mill which is the difference of the radius of each cutting edges will produce the difference of the cusp size in every rotation of end mill. These three major factors to the surface quality will be analized and the result will be compared with experimental ressult.

• 설비공학논문집
• /
• 제22권5호
• /
• pp.322-327
• /
• 2010

It is a critical task to keep the ventilation system working in a proper and efficient manner in large multi-storey buildings, and the enthalpy exchanger is becoming an increasingly important part of the ventilation system by playing the function of channeling heat and moisture. We present a computational study on the heat transfer performance of the cross-flow enthalpy exchanger, which is in large use for residential buildings. The ducts are considered whose cross-sectional shapes resemble triangle and longitudinal centerline a cosine wave. It is shown that, as the cross-sectional shape departs from triangle, the heat transfer performance of the duct tends to deteriorate. Also, applying the wave-like shape to the longitudinal centerline of the duct increases the rate of heat transfer and the applied pressure-gradient at the same time. The origin of the performance variations in the cases considered are quantitatively analyzed and discussed.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.13-18
• /
• 2011

Building is different from the general commodities and needs to maintain the function and performance to get the living condition. Building deterioration occurs naturally with time elapse. Deterioration reasons are various. These are physical, functional, social and second physical aspect. Building would inevitably be deteriorated and need to repair various building part and materials. It gets to arrive at repair or rebuilding time until any management activity is meaningless. It is important to decide the rebuilding time in a management cost. In this paper, it aimed at analyzing the management annual cost and provide a rebuilding time of a apartment housing with a deterioration curve model. Results of this study are as follows : Most of the building has started to deteriorate in 40 years when the performance of building downgrades to 20%. After it past about 40 years, the deterioration rate is faster than the earlier 40 years. Fourth, the rebuilding time of an apartment housing is recommended about 45 years if the building service life has 60 years.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.111-116
• /
• 2012

This study investigates the complete removal of nitrate and the recovery of valuable ammonium salt by the combination of nanoscale zero-valent iron (NZVI) and a membrane contactor system. The NZVI used for the experiments was prepared by chemical reduction without a stabilizing agent. The main end-product of nitrate reduction by NZVI was ammonia, and the solution pH was stably maintained around 10.5. Effective removal of ammonia was possible with the polytetrafluoroethylene membrane contactor system in all tested conditions. Among the various operation parameters including influent pH, concentration, temperature, and contact time, contact time and solution pH showed significant effects on the ammonia removal mechanism. Also, the osmotic distillation phenomena that deteriorate the mass transfer efficiency could be minimized by pre-heating the influent wastewater. The ammonia removal rate could be maximized by optimizing operation conditions and changing the membrane configuration. The combination of NZVI and the membrane contactor system could be a solution for nitrate removal and the recovery of valuable products.