• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2024

In this study, LiDAR-detective black material is synthesized by recycling silicon sludge (SS) that is generated from semiconductor manufacturing process, and its recognition is confirmed using two types of LiDAR sensors (MEMS and Rotating LiDAR). In detail, metal impurities on the surface of SS is removed, followed by coating of titanium dioxide (TiO₂) and subsequent chemical reduction to obtain SS-derived black TiO₂ (SS/bTiO₂) material. As-prepared SS/bTiO₂ is mixed with transparent paint to prepare hydrophilic black paints and applied to a glass substrate using a spray gun. SS/bTiO₂-based paint shows similar blackness (L^*=15.7) compared to commercial carbon black-based paint, and remarkable NIR reflectance (26.5R%, 905nm). Furthermore, MEMS and Rotating LiDAR have successfully detected the SS/bTiO₂-based paint. This is attributed to the occurrence of high reflection of light at the interface between the black TiO₂ and the silicon sludge according to the Fresnel's reflection principle. Hence, the new application field to effectively recycle silicon sludge generated in the semiconductor manufacturing process has been presented.

• Imaging Science in Dentistry
• /
• v.37 no.4
• /
• pp.205-209
• /
• 2007

Purpose: To determine the physical properties of a newly developed cone beam computed tomography (CBCT). Materials and Methods: We measured and compared the imaging properties for the indirect-type flat panel detector (FPD) of a new CBCT and the single detector array (SDA) of conventional helical CT (CHCT). Results: First, the modulation transfer function (MTF) of the CBCT were superior to those of the CHCT. Second, the noise power spectrum (NPS) of the CBCT were worse than those of the CHCT. Third, detective quantum efficiency (DQE) of the indirect-type CBCT were worse than those of the CHCT at lower spatial frequencies, but were better at higher spatial frequencies. Although the comparison of contrast-to-noise ratio (CNR) was estimated in the limited range of tube current, CNR of CBCT were worse than those of CHCT. Conclusion: This study shows that the indirect-type FPD system may be useful as a CBCT detector because of high resolution.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.726-732
• /
• 2017

Bacillus anthracis, Vibrio cholerae, Variola virus and Shigella dysenteriae are classified as category A and B biological weapons. In this study suggest that 4 genes of Bacillus anthracis, 2 genes of Vibrio cholerae, 1 gene of Variola virus and 1 gene of Shigella dysenteriae were detective 50~500 fg of target DNA per reaction using real-time PCR based assay. Also analytical specificity did not show any cross-reactivity with other related bacteria. Reliable and one reaction could be effective early diagnostic and treatment for detection of unknown samples.

• BMB Reports
• /
• v.42 no.11
• /
• pp.731-736
• /
• 2009

The generation of functional recombinant antibodies from hybridomas is necessary for antibody engineering. However, this is not easily accomplished due to high levels of aberrant heavy and light chain mRNAs, which require a highly selective technology that has proven complicated and difficult to operate. Herein, we attempt to use an alkaline phosphate (AP)-fused form of single-chain variable fragment (scFv) for the simple identification of a hybridoma-derived, functional recombinant antibody. As a representative example, we cloned the scFv gene from a hybridoma-producing mouse IgG against branched-chain keto acid dehydrogenase complex-E2 (BCKD-E2) into an expression vector containing an in-frame phoA gene. Functional recombinant antibodies were easily identified by conventional enzyme-linked immunosorbent assay (ELISA) by employing scFv-AP fusion protein, which also readily serves as a valuable immuno-detective reagent.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.707-718
• /
• 2001

The purpose of this study is to evaluate a newly developed protective suit with the fragments of grenade. The protection efficiency should be strengthened upon the degree of wound. The fragment weight of the used grenade was measured and the kinetic energy of the maximum speed of the fragments in the field test was 137.7J and this could be the protective efficiency test by the multitude fragments in less than 0.031g of the M16A1. The panel inserted to the new demining suit has protection rate of 100% within the distance of 1m and sample II has protection rate of 100% only beyond the distance of 5m. The test showed that the protection rate on the protective suit of the existing garment was comparatively high, however, the protection rate of the sleeve part was very low. The new demining suit through the research demand some complementary measures to lower the temperatures in ear, average skin temperatures, and the temperatures-humidity inside the clothing for summer climate condition, It showed that 30 minutes of rest on the clothing was difficult to go back to the original condition. But in winter climate condition, there was no problem in the temperature, humidity, and comfort to go back to the original condition during the rest and was better in warmth.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.13-20
• /
• 1999

This study is to calculate the exposed radiation dose using Bit method, NDD calculation method and monogram method without dosimeter. In addition, we can calculate the radiation dose from x-ray film density as a film badge. The authors examined the entrance skin dose from $2{\sim}3$ intercostal chest x-ray film density. We also studied the relationship between film density and equivalent dose in the each screen film system under the different radiation quality and the poor geometry condition of grid ratio. As results, we established the deductive method to define the entrance skindose from chest x-ray film density. The error range was found in the range $-13%{\sim}+l7%$ for between deductive entrance skindose and the $2{\sim}3$ intercostal chest x-ray film density to actual detective radiation dose with dosimeter.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.45-55
• /
• 1995

This study was carried out to elucidate the toxic mechanism of cadmium in peripheral nerve. An animal model of cadmium neuropathy was induced by feeding diet containing cadmium to Sprague- Dawley rat (or two weeks. Four weeks aged Sprague- Dawley rats were divided into four groups : normal control group, 10ppm- cadmium treated group, 100ppm- cadmium treated group, 1000ppm- cadmium treated group, reference drug- treated group. All rats were sacrificed at the end of two weeks for assessing the development of cadmium neuropathy, These results obtained were summarized as follows : 1. Cadmium reduced peripheral flow of both acetylcholinesterase and cholinesterase in rat sciatic nerve. 2. The toxic mechanism of cadmium might be the result of an reduction of myo-inositol concentration in peripheral nervous system 3. Reduction in myo-inositol content of peripheral nerve resulted from the inhibition of sodium- Potassium ATPase activity, which is responsible for myo-inositol transport, by cadmium 4. Oral administration of myo-inositol improved the flow of both acetylcholinesterase and cholinesterasenerve in cadmium intoxicated rat. These results suggest that mild cadmium neuropathy might be diagnosed by checking nervous myo-inositol content and oral administraion of myo-inositol might prevent the development of severe cadmium neuropathy with special reference to detective axonal transport.

• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.139-144
• /
• 1999

This thesis is a study on using of entropy information about the additional words in the after processing step to promote an accuracy in speech recognition system. The exsisting ratio of Woodo detective method changes the efficiency of speech recognition system according to speech data and increases the probability of producing error recognition because of similarity of value of Woodo in the additional words. But we could obtain the accurate speech recognition system which heightens discrimination becoming independent of speech data by using of after processing method refusing a candidate which entropy price is lower among words except words we could recognize than entropy Price of each additional word. As a result of this experiment when the false alarm is 20 percent, we could put out the maximum 3.6 percent efficiency of recognition system through this after processing method by entropy more than the method by ratio of Woods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.14-25
• /
• 2010

Small cracks or chips of a product appear very frequently in the course of continuous production of an automatic press process system. These phenomena became the cause of not only defective product but also damage of a press mold. In order to solve this problem AE(Acoustic emission) system was introduced. AE system was expected to be very effective to real time detection of the defective product and for the prevention of the damage in the press molds In this study, for the pick and analysis of AE signals generated from the press process, AE sensors/pre-amplifier/analysis and processing board were used as frequently found in the other similar cases. For the analysis and processing the AE signals picked in real time from the normal or the detective products, specialized software called AE-win(software for processing AE signal from Physical Acoustics Corporation) was used. As a result of this work it was conformed that intensity and shape of the various AE signals differ depending on the weight of the press and thickness of sheet and process type.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.8
• /
• pp.1117-1128
• /
• 2002

This study suggests the most efficient teaching method by using multi-media. Based on the outcome of the engineering study, the multi-media and their contents will be applied to teaching methods, at first needing to provide concept and educational expecting effect of them. For multi-media using teaching methods, the study suggests the following 4; (1) teaching method for instructional learning, (2) teaching method for detective learning by guild, (3) teaching method for receptive loaming, (4) teaching method for exploration. Challenges still remained is to examine principles of teaching planning and relevant theories in order to apply the multi-media for the existing education, which should ask teachers in field to select more efficient teaching methods.