• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1462-1465
• /
• 2004

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Coulter counter allows to count the number of cell passing through the microchannel by detecting impedance variation between two electrodes. The relative position of two electrodes is important for sensitivity of impedance measurement. 100nm thick Al electrodes are deposited on the channel side wall by means of shadow evaporation.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.221-226
• /
• 2006

We usually use two techniques(influence function and local influence) for detecting outliers. But, we cannot use these difficult techniques in elementary industrial statistics course for college students. We can use some simple graphical methods(box plot, dandelion seed plot, influence graph and cumulative deletion plot) for univariate and bivariate outlier detection and outlier effect in elementary industrial statistics course for college students.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.346-352
• /
• 2006

In Brushless DC Motor, there are Permanent Magnets (PMs) with driving circuit and sensor for detecting to rotor position and rotation speed. In the case of using hall IC sensor which response to magnetic flux, that is required to additional sensor magnet for rotor position detecting. Most of BLDC motor, However, take asymmetrical overhang of PM in rotor instead of additional sensor magnet for operating of hall IC sensor. The asymmetrical overhang of PM occur rotor thrust to z-axis direction that is lead to not only damage of bearing but also intensive noise and vibration. Therefore, the analysis of magnet overhang effect in the side of vibration and drive to hall If sensor is required to precise. In this paper, 2-D Finite Element Method is used to solve precise field computation and thrust of z-axis direction considering asymmetrical magnet overhang. And also the z-axis thrust from the analysis result is compared to experimental result. In conclusion, the purpose of this paper minimize to noise and vibration of BLDC Motor as analyzes to asymmetrical magnet overhang effect.

• 반도체디스플레이기술학회지
• /
• 제15권3호
• /
• pp.46-50
• /
• 2016

Recently, Depending on expectancy effect and ripple effect of augmented reality, the convergence between augmented reality and culture & arts are being actively conducted. This paper proposes a learning method for effective object tracking in 3D storytelling augmented reality in cultural properties. The proposed system is based on marker-less tracking, and there are four modules that are recognition, tracking, detecting and learning module. Recognition module is composed of SURF and LSH, and then this module generates standard object information. Tracking module tracks an object using object tracking based on reliability. This information is stored in Learning module along with learned time information. Detecting module finds out the object based on having the best possible knowledge available among the learned objects information, when the system fails to track. Also, it proposes a method for robustly implementing a 3D storytelling augmented reality in cultural properties in the future.

• 응용통계연구
• /
• 제29권4호
• /
• pp.699-706
• /
• 2016

검정절차가 생략된 이상치 탐지법은 구조적으로 수렁효과나 가면효과에 취약하기 때문에 다수의 이상치를 제대로 탐지하지 못할 때가 있다. 본 연구에서는 군집화에 의하여 구분된 소수 관찰치군을 이상치로 판정하는 방법에 보완될 검정절차를 다룬다. 이에 관련된 일반적인 방법은 탐지된 이상치 후보군의 개별적인 관찰치에 대해 다양한 종류의 t-검정을 수행하는 것이다. 본 연구에서는 이상치 후보군에 대한 검정을 수행하고 군집나무의 절단기준을 변경시켜 새로운 이상치군을 탐색해 나가는 순차적인 방법을 제안한다. 예제와 모의실험을 통해 제시된 방법과 기존의 방법들을 비교한다.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.119-131
• /
• 2000

This paper suggests a new diagnostic measure for detecting influential observations in linear discriminant analysis (LDA). It is developed from a Bayesian point of view using a default Bayes factor obtained from the imaginary training sample methodology. The Bayes factor is taken as a criterion for testing homogeneity of covariance matrices in LDA model. It is noted that the effect of an observation over the criterion is fully explained by the diagnostic measure. We suggest a graphical method that can be taken as a tool for interpreting the diagnostic measure and detecting influential observations. Performance of the measure is examined through an illustrative example.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.81-91
• /
• 1997

In this study, a magnetic sensor to make use of eddy current was developed to detect the weld seam of butt joint in the sheet metal arc welding. This system consist of the sensor device for detecting the weld line, the servo control device for driving the weld torch movement and the control unit. A signal processing was applied to smooth the output signal of the sensor. The weld joint was determined by using a 1st order differential method. To improve tracking accuracy of the system, moving average method which has an effect of proportional and weighted integral control was applied to a series of the weld joint positions obtained above. The weld line for tracking was generated by using data regeneration algorithm. Based on these results, each servo motor was controlled by pulse generator. From experimental results, it was revealed that this system has excellent detecting ability for weld line and seam tracking ability.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.65-74
• /
• 1995

The weld seam tracking sensor is indispensable to improve the flexibility of automatic arc welding systems. Among the position sensing methods available, a laser displacement sensor is one of the most prevailing methods. In this study, a laser displacement sensor was examined on detecting the weld seam of lap joints in sheet metal arc welding. The output signal of the laser displacement sensor may ontain severe fluctuation from the effect of arc light, spatters, fume, etc. So a variety of signal processing methods was applied to smooth the output signal of the sensor. And then the weld joint was determined by using the central difference method. It was revealed that the quadratic mean method plays an important role in detecting the weld seam during welding especially.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.98.3-98
• /
• 2001

The research for detecting of insulating deterioration in transformer has been studied from long ago. Analysis method of combustible gas, which is included in insulating oil, has been widely used in detection of transformer pre-fault detection due to the effectiveness of its method. Recently the fault effect of the large transformer is very critical in a power system, therefore the on-line monitoring and diagnostic system is needed. In addition, the more accurate method of detecting a Partial Discharge (PD) location should be developed. For preventive maintenance against discharge failures, it is important not only to detect the discharges, but also to accurately estimate their positions. However ...

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.71-74
• /
• 2006

The purpose of this study is to observe how Korean listeners detect a target phoneme with 'Focus' represented by prosodic prominence and question-induced semantic emphasis. According to the automated phoneme detection task using E-Prime, Korean listeners detected phoneme targets more rapidly when the target-bearing words were in prominence position and in question-induced position. However, when phoneme targets were in prominence position, response time was much faster than in question-induced position. The results suggest that the prosodic prominence which is explicit method of focus representation be more effective than question-inducing, implicit method of it, in phoneme detecting.