• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.569-572
• /
• 2003

In VLM-ST process, the fine detailed shape processing process is needed due to the use of thick sheets for layers. The developed process perform the fine detailed shape processing in VLM-ST parts using non-contact hot tool. To predict the heat-affected zone and temperature distribution of VLM-ST parts in detailed shaping, the heat flux from the tool to the surface was calculated for the finite element analysis by modeling the tool as a heat source of radiation. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the analysis. The results showed a good agreement with the experiments.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.1
• /
• pp.42-53
• /
• 2021

Street trees improve the cityscape and air quality, reduce heat islands, and create wildlife habitats. Hence, they are essential parts of a city's green infrastructure. Therefore, several trees that are well adapted to the urban environment were planted. However, this caused the problem of simple trees being planted around the world. This study is to select more various street trees. To accomplish this, evaluation criteria and detailed indexes were created. The importance was indicated through the Analytic Hierarchy Process. For commercial roads, the priority of landscape characteristics is 0.2640, and among detailed indicators, the priority of shape is 0.1245. For work roads, the priority of landscape characteristics is 0.2496, and among detailed indicators, the priority of shape is 0.1177. For work roads, the priority of characteristics of civil service is 0.2250, and among detailed indicators, the priority of shape is 0.1177. For general roads, the priority of maintenance characteristics is 0.2479, and among detailed indicators, the priority of shape is 0.1062. For historical and cultural roads, the priority of regional characteristics is 0.3488, and among detailed indicators, the priority of regional characteristics is 0.1643. For ecological roads, the priority of ecosystem characteristics is 0.3488, and among detailed indicators, the priority of the diversity of species is 0.1643. For automotive-only roads, the priority of the ecosystem characteristics is 0.4639, and among detailed indicators, the priority of reducing emissions is 0.1643. This study will provide objective criteria for the selection of street trees.

• Journal of Fashion Business
• /
• v.6 no.3
• /
• pp.1-14
• /
• 2002

According to Scythian tradition, many burials contained numerous artifacts, from weapons and harness to everyday objects and a multiplicity of personal adornments. Most valuable of all is the Scythian Gold often lavishly decorated with precious stones. The detailed images on these pieces make it possible for us to picture the appearance of the Scythians, their clothes and weapons. Scythian Gold Plaques were attached to the fabric in such a way that when they moved with each movement of the wearer it created what must have been a dazzling sight in bright daylight. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Through the antique tombs bequests of Three Kingdom States hereby describe the original forms of their source of Baekje gold plaque were influenced by Scythe style. Like nearly all Scythian ornaments, such gold pieces were designed to maximize various magical powers and to signify the owner's importance relative to his fellow tribesmen.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.95-105
• /
• 2006

This paper proposes a novel approach to represent the image by using shape descriptor having an information of area. The proposed descriptor is a set of vectors, consists of radius, area and direction parameters in the concentrated center point. Due to the area parameter, we know our descriptor can obtain the information of area. Also, we give an extended shape descriptor to get more detailed representation. To do this, we move the center point of our vision to that point for region of interest. By doing so about all of region of interest, we can get our descriptor for detailed information of the image. From more detailed descriptor, it's natural that it's more efficient fur representation, retrievals and so on. We make it the normalized pattern and expand to improve its quality. The proposed method is invariant to scale, position and rotation. The results show that it can be used efficiently for image representation as we can see in retrievals of silhouette images.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.7-15
• /
• 1995

An application-oriented approach to automatic pass schedule design in shape rolling was presented in this paper. The design approach and its related program are composed of several modules for input data, graphic display, data processing, calculation of design information, drawing of detailed pass shapes, database management and finite element analysis for design verification. The developed program was applied to automatic pass schedule design for a square-to-round bar shape rolling.

• Journal of Korea Multimedia Society
• /
• v.22 no.4
• /
• pp.491-501
• /
• 2019

Variational methods, which cast deformation as an energy-minimization problem, are known to provide a good trade-off between practicality and speed. However, the time required to deform a fully detailed shape means that these methods are largely unsuitable for real-time applications. We simplify a 2D shape into a curve skeleton, which can be deformed much more rapidly than the original shape. The curve skeleton also provides a simplified control for the user, utilizing a small number of control handles. Our system deforms the curve skeleton using an energy-minimization method and then applies the resulting deformation to the original shape using linear blend skinning. This approach effectively reduces the size of the variational optimization problem while producing deformations of a similar quality to those obtained from full-scale nonlinear variational methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1615-1622
• /
• 2003

Being contacted directly with. ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) to satisfy various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a 3-D tire mesh generation considering the detailed tread pattern and shows that the contact pressure and frictional energy distribution of tires considering the detailed pattern become better than those by the simplified tire model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.26-33
• /
• 2003

Based on detailed FE limit analyses, the present paper provides tractable approximations fer plastic limit pressure solutions fur axially through-wall-cracked pipe; axially (inner) surface-cracked pipe; circumferentially through-wall-cracked pipe; and circumferentially (inner) surface-cracked pipe. In particular, for surface crack problems, the effect of the crack shape, the semi-elliptical shape or the rectangular shape, on the limit pressure is quantified. Comparisons with existing analytical and empirical solutions show a large discrepancy in circumferential short through-wall cracks and in surface cracks (both axial and circumferential). Being based on detailed 3-D FE limit analysis, the present solutions are believed to be the most accurate, and thus to be valuable information not only for plastic collapse analysis of pressurised piping but also for estimating non-linear fracture mechanics parameters based on the reference stress approach.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.659-670
• /
• 2004

Handoff is one of the most important features for the user's mobility in a wireless cellular communication system. It is related to resource reservation at nearby cells. Resource reservation to the new connection point should occur prior to handoff to enable the user to receive the data or services at the new location, at the same level of service as at the previous location. For the efficient resource reservation, mobility prediction has been reported as an effective means to decrease the call dropping probability and to shorten the handoff latency in a wireless cellular environment. A recently proposed algorithm, ZMHB, makes use of the history of the user's positions within the current cell to predict the next cell. But, the prediction of the ZMHB algorithm is found to be 80∼85% accurate for regular and random movements. In this paper, we propose a new improved ZMHB mobility prediction algorithm, which is called Detailed-ZMHB that uses detailed-zone-based tracking of mo-bile users to predict user movements. The effectiveness of the proposed algorithm is then demonstrated through a simulation.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.141-147
• /
• 2016

Background: A project for building a neutron time-of-flight (nTOF) facility is progressing. We expect that the construction will start in early 2016. Before that, a detailed simulation based on the current architectural drawings was performed to optimize the performance of our facility. Materials and Methods: Currently, several parts had been modified or changed from the original design to reflect requirements such as the layout of the electron beam line, shape of the vacuum chamber producing a neutron beam, and the underground layout of the nTOF facility. Detailed analysis for these modifications has been done with MCNP simulation. Results and Discussion: An overview of our photo-neutron source and KAERI nTOF facility were introduced. The numerical simulations for heat deposition, source term, and radiation shielding of KAERI nTOF facility were performed and the results are discussed. Conclusion: We are expecting that the construction of the KAERI nTOF facility will start in early 2016, and these results will be used as basic data.