• 한국정보통신학회논문지
• /
• 제14권5호
• /
• pp.1117-1124
• /
• 2010

PMIPv6는 IETF의 NetLMM WG에서 표준화를 진행하는 네트워크 기반 이동성 지원 기법으로서, 기존의 단말 기반 이동성 지원 기법의 문제점과 비효율성을 개선하기 위해 제안되었다. IETF에서 공개한 표준 문서는 MN에게 이동성을 제공하기 위한 네트워크 구성 요소와 그 구체적인 동작 및 핸드오버 절차에 대해 서술하고 있다. 그러나 MAG간 핸드오버에 대해서만 정의되어 있고 LMA간 핸드오버에 대해서는 정의되어 있지 않다. 따라서 MN에게 보다 효율적으로 끊김 없는 인터넷 접속을 제공하기 위해서는 LMA간 핸드오버 기법이 함께 사용되어야 한다. 본 논문에서 제안하는 기법은 기존에 제안된 LMA간 핸드오버 기법의 단점인 LMA간 터널을 사용하지 않고, 경로 최적화 절차를 거쳐 효율적인 전송 경로를 사용한다. 또한 핸드오버 지연을 줄이기 위해 사전 인증 기법을 도입하였다. 성능 분석 결과에 따르면 제안하는 기법이 기존의 이동성 지원 기법에 비해 핸드오버 지연을 크게 감소시키는 것을 확인할 수 있었다.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.203-209
• /
• 2007

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

• 디지털정책학회지
• /
• 제2권3호
• /
• pp.1-7
• /
• 2023

본 논문은 단일 영상을 이용하여 초해상도 방법을 수행하기 위해 질감-공간 영역을 분리한 뒤 세부정보를 중심으로 특징을 분류하는 방법을 제안한다. CNN(Convolutional Neural Network) 기반의 초해상도는 세부정보를 개선하기 위한 특징 추정 과정에서의 복잡한 절차와 중복된 특징 정보의 생성으로 인해 초해상도에서 가장 중요한 기준인 품질 저하가 발생할 수 있다. 제안하는 방법은 절차적 복잡성을 줄이고 중복 특징 정보의 생성을 최소화하여 초해상도 결과의 품질을 개선하기 위해 입력 영상을 질감과 공간의 두 채널로 분리하였다. 질감 채널에서는 세부정보 복원을 위해 다중스케일로 변환한 영상에 단계별 skip-connection을 적용한 잔차 블록 구조를 적용하여 특징 정제 과정을 수행함으로써 특징 추출을 개선하였고, 공간 채널에서는 평활화된 형태의 특징을 활용하여 잡음을 제거하고 구조적 특징을 유지하도록 하였다. 제안하는 방법을 이용해 실험한 결과 기존 초해상도 방법대비 PSNR 및 SSIM 성능 평가에서 향상된 결과를 보여 품질이 개선됨을 확인할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.

• Archives of Plastic Surgery
• /
• 제50권1호
• /
• pp.42-48
• /
• 2023

Background The temporalis muscle flap transfer with fascia lata augmentation (FLA) is a promising method for smile reconstruction after facial palsy. International literature lacks a detailed anatomical analysis of the temporalis muscle (TPM) combined with fascia lata (FL) augmentation. This study aims to describe the muscle's properties and calculate the length of FL needed to perform the temporalis muscle flap transfer with FLA. Methods Twenty nonembalmed male (m) and female (f) hemifacial cadavers were dissected to investigate the temporalis muscle's anatomy. Results The calculated minimum length of FL needed is 7.03cm (f) and 5.99cm (m). The length of the harvested tendon is 3.16cm/± 1.32cm (f) and 3.18/± 0.73cm (m). The length of the anterior part of the temporalis muscle (aTPM) is 4.16/± 0.80cm (f) and 5.30/± 0.85cm (m). The length of the posterior part (pTPM) is 5.24/± 1.51cm (f) and 6.62/± 1.03cm (m). The length from the most anterior to the most posterior point (aTPMpTPM) is 8.60/± 0.98cm (f) and 10.18/± 0.79cm (m). The length from the most cranial point to the distal tendon (cTPMdT) is 7.90/± 0.43cm (f) and 9.79/± 1.11cm (m). Conclusions This study gives basic information about the temporalis muscle and its anatomy to support existing and future surgical procedures in their performance. The recommended minimum length of FL to perform a temporalis muscle transfer with FLA is 7.03cm for female and 5.99cm for male, and minimum width of 3 cm. We recommend harvesting some extra centimeters to allow adjusting afterward.

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.109-119
• /
• 2007

CFRD 형식의 댐 건설이 증가함에 따라 CFRD 거동에 대한 보다 정확한 분석 및 평가가 필요하게 되었다. 수위 변화에 따른 댐 거동은 댐 설계자와 관리자의 주요 관심사이지만, 국내의 경우 관련 연구가 충분히 진행되지 않아 아직도 많은 경우 국외 사례에 의존하고 있는 실정이다. 본 연구에서는 콘크리트 차수벽 강성이 서로 다른 세 가지 원심모형실험을 통해 수위변화에 따른 CFRD 거동을 정량적으로 평가하였다. 원심모형실험은 국내에서 운영 중인 D댐의 1/2크기의 원형으로 수행되었으며, 모형 준비, 설계, 모형 구축, 계측기 설치, 실험 절차를 상세히 제시하였다. 콘크리트 차수벽은 3 종류의 유리섬유판을 통해 모사하였으며, 비행 중 수위조절을 위한 특별히 장치를 고안하였다. 국내 외 댐 계측사례를 수집 정리하여 본 원심모형실험 결과와 비교하였으며, 그 결과 본 원심모형실험은 실제 댐 거동을 비교적 높은 정확도로 모사하였음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제90권3호
• /
• pp.233-252
• /
• 2024

This research explores a new finite element model for the free vibration analysis of bi-directional functionally graded (BDFG) beams. The model is based on an efficient higher-order shear deformation beam theory that incorporates a trigonometric warping function for both transverse shear deformation and stress to guarantee traction-free boundary conditions without the necessity of shear correction factors. The proposed two-node beam element has three degrees of freedom per node, and the inter-element continuity is retained using both C1 and C0 continuities for kinematics variables. In addition, the mechanical properties of the (BDFG) beam vary gradually and smoothly in both the in-plane and out-of-plane beam's directions according to an exponential power-law distribution. The highly elevated performance of the developed model is shown by comparing it to conceptual frameworks and solution procedures. Detailed numerical investigations are also conducted to examine the impact of boundary conditions, the bi-directional gradient indices, and the slenderness ratio on the free vibration response of BDFG beams. The suggested finite element beam model is an excellent potential tool for the design and the mechanical behavior estimation of BDFG structures.

• 터널과지하공간
• /
• 제33권5호
• /
• pp.348-372
• /
• 2023

고심도 균열암반대수층 환경에서 주로 수행되는 방사성폐기물 처분사업과 관련하여, 부지적합성 및 운영 시 안정성 평가를 평가하는데 있어 해당 대상 부지의 수리지질특성 평가는 필수적이다. 이러한 심부 수리지질 특성평가에 사용되는 인자 자료는 대상 부지에 굴착된 시추공을 이용한 원위치 수리시험을 통해 얻어지는데, 이 때 조사 결과의 정확도와 신뢰성은 적합한 시험방법의 선택, 조사 시스템의 성능, 조사절차의 표준화와 직접적으로 연결된다. 본 보고에서는 심부 암반대수층의 핵심 수리지질 평가인자인 수리전도도와 저류계수를 구하기 위한 대표적인 시험법인 정압주입시험의 상세조사절차를 소개하였다. 본 보고는 2022년도에 제안한 암반공학회 정압주입시험 관련 표준시험법 자료를 보완하여 구체화 하였으며, 본 조사절차가 실제 적용된 화산암 지역 시추공 현장적용 사례도 함께 소개하였다.

• 터널과지하공간
• /
• 제34권3호
• /
• pp.231-247
• /
• 2024

고심도 암반대수층이 운영시설의 주요 대상이 되는 고준위 방사성폐기물 처분 분야에서 수리특성 정보들은 관련 처분 부지 선택, 처분 시설 상세 설계, 최적 시공 방안 도출 그리고 운영 시 안정성 평가에 있어 가장 중요한 핵심 요소로 작용한다. 국내에는 좁은 면적에 여러 암종이 혼재되어 분포하고 있기 때문에 다양한 암종별 암반대수층의 수리지질특성을 분석하고 이를 데이터베이스화 하는 사전 작업들이 중요하다. 본 논문에서는 고심도 화산암반대수층의 현장 수리특성 중 가장 대표적인 수리전도도 자료를 획득하고 이를 분석 평가하였다. 현장 자료 획득을 위해 자체적으로 개발된 고성능 수리시험 장치를 활용하였고, 표준화된 시험법 및 조사절차를 적용하였다. 수리특성 자료분석 과정에서는 심도별로 수리상수인 수리전도도 값을 구하였으며, 시험 구간에 위치한 투수성 암반 절리를 통한 지하수 흐름 양상에 관해서도 평가하였다. 본 논문에서 제안된 일련의 자료 획득 방법, 절차와 분석 결과들은 국내 고심도 암반대수층의 수리특성 자료 데이터베이스 구축에 활용됨과 더불어 향후 다양한 지역별 암종별 수리특성연구에 적용될 기술적 노하우를 향상시키는 역할도 할 것으로 기대된다.

• Asia pacific journal of information systems
• /
• 제20권3호
• /
• pp.115-137
• /
• 2010

Information technology (IT) outsourcing, the use of a third-party vendor to provide IT services, started in the late 1980s and early 1990s in Korea, and has increased rapidly since 2000. Recently, firms have increased their efforts to capture greater value from IT outsourcing. To date, there have been a large number of studies on IT outsourcing. Most prior studies on IT outsourcing have focused on outsourcing practices and decisions, and little attention has been paid to objectively measuring the value of IT outsourcing. In addition, studies that examined the performance of IT outsourcing have mainly relied on anecdotal evidence or practitioners' perceptions. Our study examines the contribution of IT outsourcing to economic growth in Korean industries over the 1990 to 2007 period, using a production function framework and a panel data set for 54 industries constructed from input-output tables, fixed-capital formation tables, and employment tables. Based on the framework and estimation procedures that Han, Kauffman and Nault (2010) used to examine the economic impact of IT outsourcing in U.S. industries, we evaluate the impact of IT outsourcing on output and productivity in Korean industries. Because IT outsourcing started to grow at a significantly more rapid pace in 2000, we compare the impact of IT outsourcing in pre- and post-2000 periods. Our industry-level panel data cover a large proportion of Korean economy-54 out of 58 Korean industries. This allows us greater opportunity to assess the impacts of IT outsourcing on objective performance measures, such as output and productivity. Using IT outsourcing and IT capital as our primary independent variables, we employ an extended Cobb-Douglas production function in which both variables are treated as factor inputs. We also derive and estimate a labor productivity equation to assess the impact of our IT variables on labor productivity. We use data from seven years (1990, 1993, 2000, 2003, 2005, 2006, and 2007) for which both input-output tables and fixed-capital formation tables are available. Combining the input-output tables and fixed-capital formation tables resulted in 54 industries. IT outsourcing is measured as the value of computer-related services purchased by each industry in a given year. All the variables have been converted to 2000 Korean Won using GDP deflators. To calculate labor hours, we use the average work hours for each sector provided by the OECD. To effectively control for heteroskedasticity and autocorrelation present in our dataset, we use the feasible generalized least squares (FGLS) procedures. Because the AR1 process may be industry-specific (i.e., panel-specific), we consider both common AR1 and panel-specific AR1 (PSAR1) processes in our estimations. We also include year dummies to control for year-specific effects common across industries, and sector dummies (as defined in the GDP deflator) to control for time-invariant sector-specific effects. Based on the full sample of 378 observations, we find that a 1% increase in IT outsourcing is associated with a 0.012~0.014% increase in gross output and a 1% increase in IT capital is associated with a 0.024~0.027% increase in gross output. To compare the contribution of IT outsourcing relative to that of IT capital, we examined gross marginal product (GMP). The average GMP of IT outsourcing was 6.423, which is substantially greater than that of IT capital at 2.093. This indicates that on average if an industry invests KRW 1 millon, it can increase its output by KRW 6.4 million. In terms of the contribution to labor productivity, we find that a 1% increase in IT outsourcing is associated with a 0.009~0.01% increase in labor productivity while a 1% increase in IT capital is associated with a 0.024~0.025% increase in labor productivity. Overall, our results indicate that IT outsourcing has made positive and economically meaningful contributions to output and productivity in Korean industries over the 1990 to 2007 period. The average GMP of IT outsourcing we report about Korean industries is 1.44 times greater than that in U.S. industries reported in Han et al. (2010). Further, we find that the contribution of IT outsourcing has been significantly greater in the 2000~2007 period during which the growth of IT outsourcing accelerated. Our study provides implication for policymakers and managers. First, our results suggest that Korean industries can capture further benefits by increasing investments in IT outsourcing. Second, our analyses and results provide a basis for managers to assess the impact of investments in IT outsourcing and IT capital in an objective and quantitative manner. Building on our study, future research should examine the impact of IT outsourcing at a more detailed industry level and the firm level.