• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.141-151
• /
• 2020

Since it was first studied in 1980, solar energy analysis model for geographic information systems has been used to determine the approximate spatial distribution of terrain. However, the spatial pattern was not able to be grasped in 3D (three-dimensional) space with low accuracy due to the limitation of input data. Because of computational efficiency, using a constant value for the brightness of the sky caused the simulation results to be less reliable especially when the slope is high or buildings are crowded around. For the above reasons, this study proposed a model that predicts solar energy of vertical surfaces of buildings with four stages below. Firstly, CIE (Commission Internationale de l'Eclairage) luminance distribution model was used to calculate the brightness distribution of the sky using NREL (National Renewable Energy Laboratory) solar tracking algorithm. Secondly, we suggested a method of calculating the shadow effect using ray tracing. Thirdly, LOD (Level of Detail) 3 of 3D spatial data was used as input data for analysis. Lastly, the accuracy was evaluated based on the atmospheric radiation data collected through the ground observation equipment in Daejeon, South Korea. As a result of evaluating the accuracy, NMBE was 5.14%, RMSE 11.12, and CVRMSE 7.09%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.385-393
• /
• 2001

Urban land use information is the base data for the urban planning, district-level planning, traffic impact assessment and environmental impact assessment, etc. The level of detail of the current land use information is not enough to analysis and planning. In this study, the status and problems of the current land use information is analysed. The advanced abroad cases, such as LBCS(Land Based Classification System) of American Planning Association, are studied. The purpose of this study is to develop the coding system for urban land use information classification. Through this system, it is anticipated to standardization of land use classification system and improvement of data compactability.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2016

Prior knowledge about the SNS (Social Network Services) datasets is often required to conduct valuable analysis using social media data. Understanding the characteristics of the information extracted from SNS datasets leaves much to be desired in many ways. This paper purposes on analyzing the detail of the target social network services, Twitter, Instagram, and YouTube to establish the spatial informatization process to integrate social media information with existing spatial datasets. In this study, valuable information in SNS datasets have been selected and total 12,938 data have been collected in Seoul via Open API. The dataset has been geo-coded and turned into the point form. We also removed the overlapped values of the dataset to conduct spatial integration with the existing building layers. The resultant of this spatial integration process will be utilized in various industries and become a fundamental resource to further studies related to geospatial integration using social media datasets.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.49-59
• /
• 1995

This thesis is purposed to economical and rational accomplishment of the agricultural water resources development project as to utilize digital topographic information in basic investigation, preliminary planning and detail design process of the agricultural water resources development. In this study, the digital topographic data is acquired to stereo aerial photography of test field and the digital elevation model(DEM) is generated by interpolation of acquired data. Also, the database of basic investigation which is constituted to graphic and at-tribute data is designed. As the results of this study, the method that is determined to this study makes a contribution to effective accomplishment of the agricultural water resources development project.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.1
• /
• pp.31-40
• /
• 1990

In this study, sample area was selected to compare the conventional method with photogrammetic method in basic planning of country club. Also various elements of planning, such as vegetation and water system, were considered through interpretation of aerial photographs and topographic maps, vegetation maps and water system maps were made as well as digital terrain models. These were used to analyse tophographic changes and landscape. As a result of comparing with the conventional method, it was shown that photographic interpretation could give more detail values than the conventional method, and that the digital terrain model could predict changes of topography, landscape and water system with more asccuracy. Consequently, the method of digital terrain model and photographic interpretation proved to be more effective than the conventional method in the case of water treatment, and planning of landscape and land utility.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.187-201
• /
• 2021

Recently, the demand for a 3D urban spatial information infrastructure for storing, operating, and analyzing a large number of digital data produced in cities is increasing. CityGML is a 3D spatial information data standard of OGC (Open Geospatial Consortium), which has strengths in the exchange and attribute expression of city data. Cases of constructing 3D urban spatial data in CityGML format has emerged on several cities such as Singapore and New York. However, the current ecosystem for the creation and editing of CityGML data is limited in constructing CityGML data on a large scale because of lack of completeness compared to commercial programs used to construct 3D data such as sketchup or 3d max. Therefore, in this study, a method of constructing CityGML data is proposed using commercial 3D mesh data and 2D polygons that are rapidly and automatically produced through aerial LiDAR (Light Detection and Ranging) or RGB (Red Green Blue) cameras. During the data construction process, the original 3D mesh data was geometrically transformed so that each object could be expressed in various CityGML LoD (Levels of Detail), and attribute information extracted from the 2D spatial information data was used as a supplement to increase the utilization as spatial information. The 3D city features produced in this study are CityGML building, bridge, cityFurniture, road, and tunnel. Data conversion for each feature and property construction method were presented, and visualization and validation were conducted.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.59-66
• /
• 2007

The digital working environment and its related technology have been rapidly expanding. In the surveying field, we have changed from using optical film cameras and plotters to digital cameras, multi sensors like GPS/INS etc,. The old analog work flow is replaced by a new digital work flow. Accurate data of the land is used in various fields, efficient utilization and management of land, urban planning, disaster and environment management. It is important because it is an essential infrastructure. For this study, LiDAR surveying was used to get points clouds in the study area. It has a high vegetation penetrating advantage and we used a digital process from planning to the final products. Contour lines were made from LiDAR data and compared with national digital base maps (scale 1/1,000 and 1/5,000). As a result, the accuracy and the economical efficiency were evaluated. The accuracy of LiDAR contour data was average $0.089m{\pm}0.062\;m$ and showed high ground detail in complex areas. Compared with 1/1,000 scale contour line production when surveying an area over $100\;km^2$, approximately 48% of the cost was reduced. Therefore we prepose LiDAR surveying as an alternative to modify and update national base maps.

• Journal of the Korea Furniture Society
• /
• v.21 no.5
• /
• pp.432-438
• /
• 2010

The study aimed at investigating the terms for each type of the current household furniture and at analyzing a standard based on those terms researched for the furniture, not including kitchen and child furniture. The study was conducted in sales and R&D division of major furniture brands such as Jang-In Gagu, Borneo, and Livart by surveying their staffs, and then, the investigated names were classified according to similar criteria and it was finally analyzed by the definite standard of the names made. In the results, the following 5 standards largely play roles for the naming. First, name according to requirements, second, construction of door, third, materials, fourth, shapes, and lastly, function. Except for the terms of "Sobari" expressed only as Japanese and "living room cabinet of Extension-type" using Korean and English along, most of the names show furniture in detail, and the names from Hangeul, Korean alphabet and from the English have recently and drastically increased with the lifestyle change influenced from Western world.

• Wind and Structures
• /
• v.10 no.1
• /
• pp.23-44
• /
• 2007

Wind tunnel experiments on small scale groups of tanks are reported in the paper, with the aim of evaluating the pressure patterns due to group effects. A real tank configuration is studied in detail because one tank buckled during a hurricane category 3. Three configurations are studied in a wind tunnel, two with several tanks and different wind directions, and a third one with just one blocking tank. The pressures were measured in the cylindrical part and in the roof of the tank, in order to obtain pressure coefficients. Next, computational buckling analyses were carried out for the three configurations to evaluate the buckling pressure of the target structure. Finally, imperfection-sensitivity was investigated for one of the configurations, and moderate sensitivity was found, with reductions in the maximum load of the order of 25%. The results help to explain the buckling of the tank for the levels of wind experienced during the hurricane.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.73-83
• /
• 2008

For spatial analysis and decision-making based on territorial and urban information, technologies on 3D GIS with digital image data and photo-realistic 3D image models to visualize 3D modeling are being rapidly developed. Currently, satellite images, aerial images and aerial LiDAR data are mostly used to build 3D models and textures from oblique aerial photographs or terrestrial photographs are used to create 3D image models. However, we are in need of quality 3D image models as current models cannot express topographic and features most elaborately and realistically. Thus, this study analyzed techniques to use aerial photographs, aerial LiDAR, terrestrial photographs and terrestrial LiDAR to create a 3D image model with artificial features and special topographic that emphasize spatial accuracy, delicate depiction and photo-realistic imaging. A 3D image model with spatial accuracy and photographic texture was built to be served via 3D image map services systems on the Internet. As it was necessary to consider intended use and display scale when building 3D image models, in this study, we applied the concept of LoD(Level of Detail) to define 3D image model of buildings in five levels and established the models by following the levels.