• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.3
• /
• pp.134-142
• /
• 2002

This paper presents a new method for the protective relaying scheme in power transformer using wavelet based neural networks. This approach is as fellows. After approximation and detail information is extracted by daub wavelet transform from differential current of power transformer, the former is used for obtaining the rate of differential currents and restrain currents, the latter used as the input of artificial neural networks to avoid the Hiss-operation in over-exciting state and magnetizing inrush state of power transformer. The simulation of EMTP with respect to different faults, inrush conditions and over-exciting conditions in power transformer have been conducted, and the results preyed that the proposed method is able to discriminate magnetizing inrush states, over-exciting stales and internal faults.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.36-42
• /
• 1997

This paper presents a new design technique for performing high quality low bit rate image compression. A hybrid coder(HC) which combines Mean Removed Important Coefficient Selection based JPEG(MR-ICS-JPEG) and Adaptive Vector Quantization (AVQ) is proposed. A new quantization table is developed using the Important Coefficient Selection(ICS) method; the importance of each coefficient is determined using the orthonormal property of the DCT. This quantization table is applied to standard JPEG with mean removal(MR) strategy before processing. This scheme, called MR-ICS-JPEG, produces more than 2 dB enhanced performance in terms of PSNR over standard JPEG. A set of homogeneous codebooks is generated by homogeneous training vectors. Before compression, an image is uniformly divided into 8${\times}$8 blocks. Low detail regions such as backgrounds are roughly coded by AVQ while high detail regions such as edges or curves are finely coded by the proposed MR-ICS-JPEG. This hybrid coder procuces consistently about 3 dB improved performance in terms of PSNR over standard JPEG.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.34-36
• /
• 1999

2 phase 8 pole HB type LPM(linear pulse motor) has the suitable structure for it's microstep drive. Hence, if this LPM will be drived by this method, the limited(mechanically) step resolution can be increased further and vibration and noise can be decreased considerably. But, It is difficult that this LPM was analyzed in detail because of it's complex magnetic circuits to be composed the LF(longitudinal flux) and TF(transverse flux.) path. If LPM was analyzed by the approximate 2D model, we could not be obtained satisfactory result. Therefore, It is necessary to be analyzed the 3D model in detail for the more satisfactory results. In this paper, we obtain 3D flux distribution of the mover using by 3D FEM(finite element method)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.103-108
• /
• 2010

The purpose of this study is to analyze of the risk factors for oversea plants construction projects. For this study, risk factors data from related literature review, research organization and construction company was researched and classified under each EPC phases. In addition, a questionnaire survey by plant experts was conducted for analysis of risk weight and costs and time impact on each EPC phases. The results of this study are as follows: First, a detail design errors(engineering phase), a equipment procurement plan(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest weight factors. Second, a financing plan(engineering phase), quantity take-off bill(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest cost impact factors. Third, detail design errors(engineering phase), a equipment procurement plan(procurement phase), and schedule management errors(construction phase) were analyzed the highest time impact factors.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.298-303
• /
• 2011

Recently, demand on machine tools has been increased because the machine and automobile industry is booming. Therefore, the machine tools need to have a high accuracy and productivity. To build a high precision machine tool and increase its productivity, structural analysis needs to be carried out for vibration and stiffness of the machine tool before its detail design. However, it is the fact that many manufacturers of machine tools depend on their know-how about design experience. Therefore, in this paper, the static and dynamic analysis is carried out for evaluating a horizontal CNC lathe and then, applied to its detail design. It is positive that the analysis can lead to reduction of design time and improvement of the quality of the lathe as its design proceeds.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.53
• /
• pp.89-97
• /
• 1999

We are concerned with the optimal design of flexible manufacturing cells in this study, thus try to suggest the detail information for each resource on the optimal conditions. Object oriented simulation technology is used to write models more easily and to execute simulation running time more rapidly, and the optimal level of relevant decision variables is probed by response surface methodology(RSM), which is well known for the optimization technology based on experiment design and regression equation. We investigate the optimal level for the number of pallets and the speed of AGVs of FMC systems, carry out the performance analysis of this system. Consequently we suggest systematic procedures for the optimization of FMCs in detail design stage.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.166-167
• /
• 2013

There has been a defect dispute of apartment building in Korea. The defect dispute is complicated by main issues and details of dispute. It is yet to be solved. Meanwhile, a judge does not a inspection and analysis, but, related field expert who contracted professional engineer does. As a result, defect consulting report that an important judgment is used in a defect dispute. Therefore, this study does research on structure of defect consulting report. A defect consulting report has same items, irrespective of a defect consultant as a result that check 7 indexes about 10 cases. It has different structure's details depending on each defect consultants. And, it inserts new detail or deletes existing detail, does not show clear distinction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.162-163
• /
• 2013

A temporary work are lifting equipment that tower crane or lift, and temporary architectures that office building and storage in construction site. And it is main construction work that built and used temporarily like to a scaffolding, a walk plate, and a formwork. This study is to adjust breakdown structure of temporary work to introduce technical tendency. With a site manager, it is collected a detailed statement and compared. As a result to break down a tendency that temporary equipment, additional function, and direct work of temporary technique, first, existing detail technical indexes that group I, group J, group K, and group L are classified. Second, due to set up and manage to main agents in case of existing detail technical indexes that B1, B2, it is not wrong to classify. But, it is somewhat different, and therefore adjust it to same level. Finally, as a technical tendency that temporary equipment, additional function, and direct work of temporary technique, it is adjusted the others.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.1-13
• /
• 1992

A computer simulation method for textile designs was developed using a generic-purpose graphics program, LUMENA and its results were applied for costume design simulation. Its design performance was comparable with those using specialized design package programs which are in general very expensive. Three areas of textile design, print pattern design, weaving design, and knitting design, were covered. In the print pattern design simulation, a gird network library was constructed by using basic methods of repeat, and a pattern library by scanning existing print patterns. Through the modification and synthesis of library patterns, many new print patterns could be obtained. In the weaving design simulation, a thread library and a draw-down library were constructed. Using them, simulations of woven textile structures were carried out. In the knitting design simulation, a stitch library and a detail library were made from various types of knit stitch and detail drawings of knit costume, respectively. They were used to make structural knitting patterns and jacquard knitting designs. Using those simulated textile designs, costume design simulation was carried out.

• Wind and Structures
• /
• v.16 no.5
• /
• pp.491-515
• /
• 2013

Wind pressure characteristics on a double tower high-rise structure, which is disturbed by surrounding buildings, were investigated using large eddy simulation (LES) and 1:300 scale wind tunnel experiments. The computational simulation technique and wind tunnel experimental technique were described in detail initially. Comparisons of computational results with the experimental data have subsequently been carried out to validate the reliability of LES. Comparisons have been performed in detail for the mean and fluctuating pressure coefficients. Detailed explanations of each comparison were given in the paper. To study further on the pressure coefficients on the building surfaces, parametric studies on shape coefficient and spatial correlation were performed and investigated. The numerical and experimental results presented in this paper advance understanding on wind field around buildings and the application of LES and wind tunnel tests.