• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.55-63
• /
• 2009

This paper reports on the theoretical and experimental study of the pressure ripples in a pressure unbalanced type vane pump which have widespread use in industry. Because they can infinitely vary the volume of the fluid pumped in the system by a control. Pressure ripples occur due to the flow ripples induced by geometry of side plate, leakage flow, reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume when the pumping chamber connected with the outlet volume. In this paper, we measured the pressure variation of a pumping chamber, reaction force on a cam ring, the mathematical model for analyzing the pressure ripples which included vane detachment and fluid inertia effects in notch area has been presented, and was applied to predict the level and the wave form of the pressure ripples according to operating conditions.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.23-30
• /
• 2002

Instability of oblique detonation waves (ODW) at off-attaching condition was investigated through a series of numerical simulations. Two-dimensional wedge of finite length was considered in $H_2/O_2/N_2$ mixtures at superdetonative condition. Numerical simulation was carried out with a compressible fluid dynamics code and a detailed hydrogen-oxygen combustion mechanism. Present result reveals that there is a chemical kinetic limit of the ODW detachment, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. Result also presents that ODW still attaches at a wedge as an oblique shock-induced flame showing periodically unstable motion, if the Rankine-Hugoniot limit of detachment is satisfied but the chemical kinetic limit is not. Mechanism of the periodic instability is considered as interactions of shock and reaction waves coupled with chemical kinetic effects. From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of the Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

• Archives of Pharmacal Research
• /
• 제22권6호
• /
• pp.585-591
• /
• 1999

The linker which plays a role in connecting a polymer with a scaffold has become an important part n solid-phase reaction. To develop a new linker for alcohols and carbohydrates, dihydropyran moiety was selected in this study. New linker, 1-($4^{l},5^{l}$-dihydro-5H-pyranyl)-7-hydroxyheptan-3-one (5) was synthesized via four steps from $\delta$-valerolactone. This can be called as DDHP-linked Wang resin due to double dihy-dropyran rings. To the one pyran ring of new linker 5 was added Wang resin and other alcohols and carbohydrates as scaffolds were then added successfully to the another pyran ring. Carbohydrate and hydroxyl resins were connected via new linker in a 70% loading yield. The detachment of glucose moiety in the presence of PPTS (2 equiv.) in 1:1 n-buteanol/1,2-dichloroethane at $60^{\circ}C$ for 12 h was carried out quantitatively. When certain combinatorial chemical works are carried out using this dihydropyran linker, Wang resin itself can be recovered. Its fact is particularly very important in industry, because recovered resins can be recycled.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권2호
• /
• pp.131-138
• /
• 1999

The purpose of this study is to evaluate the effects of resorbable plate in the healing process of mandibular fracture. Reduction and rigid fixation was carried out on the artificial mandibular fracture site of the rabbits, using a resorbable screw, 1.5mm in diameter and 4.0mm in length, and an absorbable plate 1.5mm in thickness(Lactosorb$^{(R)}$). En block tissue specimens with plate were taken from the rabbits at 4, 6, 8, and 10 weeks intervals and specimen were observed with light microscope under the hematoxylin-eosin staining, to observe the inflammatory reaction and tissue healing process. The following conclusions were drawn: 1. The subject displayed good healing with no signs of detachment of the fixation plate. 2. At 4 weeks, the plate was covered by the connective tissue. Then at 6 weeks, bone regeneration was discovered around the plate. 3. During the period of healing, no inflammatory reaction or foreign body reaction, as a result of using resorbable plate, were observed. 4. At 8 weeks, the initial phase of the absorption of the plate was observed. Then at 10 weeks, macrophage were observed around the plate, indicating the absorption phase was in process. From the above results, it can be determined that when the resorbable plate is applied to rabbit, full recuperation occurs naturally in the absence of inflammatory reaction and foreign body reaction. The selected study is clinically valuable in proving this procedure.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.293-298
• /
• 2005

Osseointegrated prosthetic auricular reconstruction can be classified as either direct or indirect. In the $Br{\aa}nemark $ system of direct osseointegration, implants are placed into the mastoid process of the temporal bone. In the Epitec system of indirect osseointegration, implants are inserted into a three-dimensional carrier plate that is fixed to the mastoid by means of screws. We experienced forty-four cases using the indirect system and seventeen cases using the direct system. We compared with two systems by complications, such as skin reaction, implant loosening, implant loss. There were no specific differences in the skin reaction around the implants and abutments in relation to age or system used. The degree of skin reaction was different according to the conditions around the implant: in cases of virgin microtia, a skin flap was used to cover the implant, in contrast to grafted skin coverage for failed autogenous reconstruction. In both systems, the skin reaction was more severe and frequent in skin flap than in grafted skin. Loosening of the implant was more frequent in the direct system; however, accidental detachment of the implant from the abutment was more frequent in the indirect system. To reduce complications of skin reaction in osseointegrated prosthetic auricular reconstruction, it is important for soft tissue around implant to immobilize. Therefore, grafted skin is better than skin flap as soft tissue around implant. And immobilization of soft tissue around implant by wound dressing is major facter.

• 접착 및 계면
• /
• 제19권2호
• /
• pp.84-94
• /
• 2018

Electrically debonding adhesives[EDA], one of the controlled delamination materials[CDM] is reviewed. CDM can be defined as the ability to separate adhesive bonded assemblies without causing damage to the substrates. Its application includes electronics, medical surgery, dentistry, building and general manufacturing where the opportunity to separate assemblies is important. There are several important mechanisms of EDAs; faradaic reaction, phase separation and anode detachment, cathodic debonding, gas emission mechanism, and mechanical stresses. These mechanisms are reviewed with various research results. Since the mechanism behind the electrochemical debonding of adhesives is not well understood, this review aims to help the research scientists in the industries. Finally, new applications of EDA are introduced as new business opportunity.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.349-360
• /
• 2023

This study investigated the tri-metallic galvanic coupling of different metals in the tubes, fillers, and fins of a heat exchanger. The goal was to prevent corrosion of the tubes using the fin as a sacrificial anode while ensuring that the filler metal has a more noble potential than the fin, to avoid detachment. The metals were arranged in descending order of corrosion potential, with the noblest potential assigned to the tube, followed by the filler metal and the fin. To address a reduction in protection current of the fin, the filler metal was modified by adding Zn to decrease its corrosion potential. However, increasing the Zn content of filler metal also increases its corrosion current. The study examined three different filler metals, considering their corrosion potential, and kinetics. The results suggest that a filler metal with 1.5 wt.% Zn addition is optimal for providing cathodic protection to the tube while reducing the reaction rate of the sacrificial anode.

• 마이크로전자및패키징학회지
• /
• 제8권1호
• /
• pp.53-59
• /
• 2001

Surfaces of PTFE and PVDF were modified by ion-assisted reaction (IAR) in which 1 keV $Ar^{+}$ ions were irradiated on the surface of the polymer with varying ion dose in an oxygen gas environment, and Cu, Pt, Al and Ag thin films were deposited on the modified polymers. Wettability of the modified polymers was largely improved by the formation of hydrophilic groups due to chemical reaction between polymer surface and the oxygen gas during IAR. The change in wettability in the modified polymers was also related to the change in surface morphology and roughness. Adhesion between metal films and polymers modified by IAR was significantly improved, so that no detachment was possible in the $Scotch^{TM}$ tape test. The increase of adhesion strength between the metal film and the modified PVDF was mainly attributed to the formation of hydrophilic groups, which interacted with the metal film. In the case of the modified PTFE, the enhanced adhesion to metal film could be explained by the change in surface morphology together with the formation of hydrophilic groups. The electrical properties of the metal films on the modified polymers were also investigated.

• 환경영향평가
• /
• 제27권6호
• /
• pp.595-603
• /
• 2018

본 연구는 경기도 중소하천에서 하상의 부착미생물군집의 시간에 따른 생장 변화와 부착미생물군집의 성장에 따른 불소의 제거 효율을 파악하기 위해 수행하였다. 방류수가 유입되는 지점인 P1과 그 곳에서 약 2 km 유하한 하류 지점인 P2에서 12주 동안의 현장 모니터링을 실시하고, 조사 지점의 수질과 부착미생물군집의 생체량 분석을 진행하였다. 부착미생물군집의 성장량은 7차 조사 시점까지 증가하다 이후 탈리현상이 발생하는 것으로 관찰되었으며, 부착미생물군집의 성장에 영향을 미치는 요인으로는 유량, 유속, 영양물질(질소, 인) 등으로 조사되었다. 한편, 부착미생물군집 체내의 불소 함유량 또한 7차 조사 시기까지 증가하다 8차 시점부터 감소하는 경향을 보였다. 이는 부착미생물군집의 탈리현상에 의해 불소의 함유량 또한 감소하였음을 사사한다. 이를 통해 하천 관리의 방안으로서 부착미생물군집의 활용법에 대한 평가 및 관리에 기여할 수 있을 것으로 기대된다. 부착미생물군집을 활용한 기법의 적용 시에는 부착미생물군집의 성장에 영향을 미칠 수 있는 요인에 대한 기초 조사 및 탈리 시점에 따른 부착판 교체 방안 등이 포함되어야할 것으로 사료된다.

• 대한화학회지
• /
• 제29권4호
• /
• pp.426-436
• /
• 1985

몇가지 벤즈아닐리드류를 합성하여 광반응시킨 후 생성물을 분리하고 그 구조를 결정하였다. 벤즈아닐리드 자체는 광고리화 안되고 Photo-Fries형 생성물을 주었지만 2-chlorobenzaniline, 2-bromobenzanilide, 및 2-methoxybenzanilide는 질소기류하에서 광고리화하여 모두 phenanthridone을 생성하였다. 2-chloro-2-nitrobenzanilide는 광고리화되지 않았다. 니트로기가 페닐고리에 도입되니 들뜬상태의 에너지가 낮아서 광고리화 안되었다. 2,2'-dichlorobenzanilide가 광고리화 되어 8-chlorophenanthridone이 되는 것으로 보아 들뜬 부분은 카르보닐쪽의 페닐 부분인것을 알 수 있었다. 2'-위치에 Cl이 있는 경우에도 광고리화 되었다. 2-chlorobenzanilide나 2'-chlorobenzanilide에 대하여 몇가지 용매중에서 광고리화 양자수득률을 구하였는데, 2-chlorobenzaniline는 효과적으로, 2'-chlorobenzanilide는 비효과적으로 광고리화 되었다. 대체로 비극성용매중에서 또 저점성용매중에서 양자수득률이 좋았다. 2-chlorobenzaniline가 광고리화 될때 산소의 영향을 시험하였는데, 산소가 존재하는 데서 광고리화가 잘 안되었다. 따라서 이때 삼중상태가 상관하는 것을 알았으며 전이상태는 염소원자가 떨어져 나가고 이때 이웃 페닐고리가 도우는 메카니즘을 제안한다. 삼중상태의 2-chlorobenzaniline에서 카르보닐쪽의 페닐과 N-페닐의 도움으로 카르보닐쪽의 페닐에 붙은 염소원자 떨어져나가 중간체인 컨쥬게이션된 라디칼이 된다. 이 라디칼에서 수소원자가 떨어져 나가 phenanthridone이 되는데, 이 단계는 속도결정단계가 아니다. 왜냐하면, 이 광고리화 반응에서 수소대신 중수소를 치환해도 속도에는 영향이 없기 때문이다. 2-methoxybenzanilide가 광고리화 될때는 산소가 존재하니 반응이 빨라졌다. 이는 단일 상태가 상관하는 것 같으며 산소가 중간체를 산화하여 반응을 촉진하는 것 같다.