• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.381-386
• /
• 1997

A series of experiments were conducted to compare the effects of various diluents in cold storage on the marbled sole, Limanda yokohamae sperm. Various diluents of glucose, L. yokohamae serum, marine fish Ringer's solution, sodium citrate and Ca2+ free artificial seawater (ASM) (tris-HCI, pH 7.4) containing 3 mM ethylene glycol-bis (2-aminoethyl ether) tetraacetic acid (EGTA) were used to store the sperm at 4℃. The storage effect was evaluated using motility index and survival rate of sperm. Glucose and sodium citrate were found to be better diluents which maintained high motility and survival rate of sperm for a storage period of 10 days. Some morphological changes of spermatozoa were observed during the cold storage with diluents. In particular, a detachment of the nuclear enveloped and of the plasma membrane from the nucleus in spermatozoa was observed. Morphological normality of the stored spermatozoa diluted with 0.3 M glucose was better than that of the stored spermatozoa undiluted or diluted with Ca2+ free ASW containing 3 mM EGTA.

• The Journal of the Korean dental association
• /
• v.9 no.12
• /
• pp.823-827
• /
• 1971

The auther has made an epidemiological study on the oral examination and oral health in 226 Korea Military Nursing School Students. The following results was obtained: 1. The prevalance rate of dental caries was 71.23%. 2. The prevalance rate of D.M.F. was 45.82%. 3. The tooth health index was 77.87%. 4. The prevalance distribution of dental caries was 63.87% in the mandibular and 36.13% in the maxila. 5. Of examined students, 94.0% was brushing twice per day and 6.0% once per day. 6. Of examined students, 98.2% was using the paste form on dentifrice and tooth brush. 7. Of examined students, 22.1% was ignorant of causes of dental caries.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.48-48
• /
• 2009

Conventionally in pulsed gas metal arc welding (GMAW-P), drop transfer is analyzed with simplest square pulse waveform. While the pulse current is described by four parameters (peak current magnitude and time plus base current magnitude and time), it deviates the real pulse shape. Real pulse can be better idealized by the trapezoidal pulse waveform described by two additional parameters, i.e., current rise and fall rate (dI/dt). Power source response rate is described by these parameters. In this work, the effect of these parameters on drop transfer is predicted by the force displacement model (FDM). While peak current has significant effects on drop detachment, drop transfer is also influenced by the current rise rate. Predictions indicate that the current rise rate can have considerable effects on the size of the detached drop if other pulse parameters are kept constant. FDM is applied to determine peak time for one drop one pulse condition (ODOP) when rests of the pulse parameters are given. The predicted range of ODOP shows good agreement with experimental data.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.595-603
• /
• 2018

This study was conducted to understand the growth of attached microbial community in small and medium streams of Gyeonggi-do and the removal efficiency of fluoride with changes in growth. The sites monitoring were carried out for 12 weeks at the P1 and P2(P1 is the point where the discharge water flows. P2 is the downstream point of about 2 km flow), and investigated the water quality and the biomass analysis of the attached microbial community. The growth of the attached microbial community increased up to the 7th investigation, and it was observed that detachment phenomenon occurred. Influencing factors about growth of the attached microbial community were flow rate, velocity, and organic material(T-N & T-P). Meanwhile, fluoride content of attached microbial community also tended to increase until the 7th investigation, and decrease from the 8th. It is assumed that fluoride content has also be reduced with the detachment phenomenon of the attached microbial community. It is expected that this will contribute to the evaluation and management of the use of attached microbial community as a means of stream management. The application of techniques using the attached microbial community should include basic investigation of factors that may affect the growth of the attached microbial community and replacement of the attachment plate according to the time of removal.

• Parasites, Hosts and Diseases
• /
• v.49 no.3
• /
• pp.313-316
• /
• 2011

Vivax malaria is a significant military and civilian health threat in the north of the Republic of Korea (ROK). The island of Baengnyeong-do is the westernmost point of the ROK and is located close to the southwestern coast of the Democratic People's Republic of Korea (DPRK). Mosquitoes were collected using a black light trap on Baengnyeong-do, and Anopheles spp. were assayed by PCR, to identify the species, and screened for sporozoites of Plasmodium vivax. Of a subsample of 257 mosquitoes, Anopheles lesteri was the most frequently collected (49.8%), followed by Anopheles sinensis (22.6%), Anopheles pullus (18.7%), Anopheles kleini (7.8%), and Anopheles belenrae (1.2%). The overall sporozoite rate was 3.1%, with the highest rates observed in An. kleini (15.0%), An. sinensis (5.2%), and An. lesteri (1.6%). No sporozoite positive An. pullus or An. belenrae were observed. The results extend our knowledge of the distribution and potential role in malaria transmission of An. kleini, An. lesteri, and An. sinensis, for an area previously considered to be at a low risk for contracting vivax malaria.

• Korean Journal of Radiology
• /
• v.2 no.4
• /
• pp.197-203
• /
• 2001

Objective: To compare the clinical utility of contrast-enhanced color Doppler US in the differentiation of retinal detachment (RD) from vitreous membrane (VM) with that of various conventional US modalities, and to analyze the enhancement patterns in cases showing an enhancement effect. Materials and Methods: In 32 eyes examined over a recent two-year period, RD (n=14) and VM (n=18) were confirmed by surgery (n=28) or clinical follow-up (n=4). In all cases, gray-scale, color Doppler, and power Doppler US were performed prior to contrast injection, and after the intravenous injection of Levovist (Schering, Berlin) by hand for 30 seconds at a dose of 2.5 g and a concentration of 300 mg/mL via an antecubital vein, contrast-enhanced color Doppler US was performed. At Doppler US, the diagnostic criterion for RD and VM was whether or not color signals were visualized in membranous structures. Results: Diagnostic accuracy was 78% at gray-scale US, 81% at color Doppler US, 59% at power Doppler US, and 97% at contrast-enhanced color Doppler US. The sensitivity of color Doppler US to color signals in RD increased from 57% to 93% after contrast enhancement. The enhancement patterns observed were signal accentuation (n=3), signal extension (n=2), signal addition (n=3), and new signal visualization (n=5). Conclusion: Contrast-enhanced color Doppler US was the most accurate US modality for differentiating RD from VM, showing a significantly increased signal detection rate in RD.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.239-243
• /
• 2008

The fluctuation of inlet flow to a water treatment plant makes a serious problem that it can change the outlet flow-rate from each process abruptly, and ultimately occur the detachment of the attached particles inside each unit process. Also, since it takes very short time for the surface wave occurred from the fluctuation of inlet flow to reach the latter processes, it is impossible for operators to cope with that stably. Therefore this study was conducted to suggest the methodology for accurately predicting the travel time of surface wave occurred from the fluctuation of inlet flow to reach the latter process. Through the experiment, which was carried out for the full-scale water treatment plants(capacity : 2,000m3/d), it could be confirmed that the flow rate fluctuation from equalization tank produce the surface wave. And the wave transfer velocity is a function of the hydraulic radius and the length of each open type tanks which are comprised in the latter processes.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.443-450
• /
• 2008

The purpose of this study is to measure both ECG and BCG(Ballistocariograph) signal of a subject on moving or resting wheelchair and detect the heart rate and respiratory rate and transmit an event message to remote server on emergent situation. To acquire ECG and BCG data, amplifier circuits were composed to be suitable for their characteristics. The output signals were converted to digital data and stored in bio-signal archiving media(SD card). CDMA module was used to transmit the event data on ECG electrode detachment and the received data was monitored by the developed C# application program. 5 volunteers participated in the experiment to evaluate the validity of the developed device. When the event occurs in each subject, 48 Kbyte data, stored for 32 seconds from that point, was transmitted to remote server through CDMA cellular phone network correctly. The received data of ECG, BCG, and 3-axial acceleration could be archived in server and the heart rate and respiratory rate could be measured and analyzed. The developed device in this study could acquire the ECG and BCG data of subjects on wheelchair simultaneously and measure their heart rate and respiratory rate. In addition, event data was verified to be transmitted to remote server without any errors.

• Journal of Aquaculture
• /
• v.17 no.1
• /
• pp.46-50
• /
• 2004

In the present study, attempts were made to cryopreserve sea urchin, Anthocidaris crassispina sperm in liquid nitrogen, to evaluate the effects of various cryoprotectants and freezing rates on motility, survival rate and fertilization rate of the post-thawing sperm, and the ultrastructural changes of sperm after cryopreservation were observed. The highest values of sperm motility (motility index: 3.3$\pm$0.37) and survival rate (72$\pm$3.5%) were obtained with 15% dimethyl sulfoxide (DMSO), and these values were significantly higher than those of sperm preserved with glycerol. Comparisons of motilities and survival rates between treatments of difference freezing rates showed that there was no difference between procedures (a) 5$0^{\circ}C$/min to -8$0^{\circ}C$ (motility index: 3.3$\pm$0.31 ; survival late 70$\pm$2.7%) and (b) 3$0^{\circ}C$/min to -8$0^{\circ}C$ (motility index: 3.1$\pm$0.29; survival rate 69$\pm$3.7%), while the results of (c) 1$0^{\circ}C$/min to -8$0^{\circ}C$ were significantly lower than the others (motility index: 2.2$\pm$0.33 ; survival rate 42$\pm$4.6%). There was no significant difference in fertilization rate between fresh sperm and sperm preserved with 15% DMSO as cryoprotectant and freezing rate (3$0^{\circ}C$/min to -8$0^{\circ}C$). Some ultrastructural changes of sperm, such as the detachment of plasma membrane, the destruction of mitochondria, and the flagellum rolling up head, were observed after cryopreservation. Morphological normality of the sperm in 15% DMSO frozen at the ratio of 5$0^{\circ}C$/min to -8$0^{\circ}C$ was better than the others.

• Tribology and Lubricants
• /
• v.16 no.6
• /
• pp.415-424
• /
• 2000

The use of magnetoresistive (MR) head requires much tighter control of particle contamination in a drive since loose particles on the disk surface will generate thermal asperities (TA). In this study, a spinoff test was performed to investigate the adhesion and removal capability of a particle to disk surface. Numerical simulation was also performed to investigate dominant factor of particle detachment and to support experimental results. It was shown that particles are detached from the disk surface by the moment derived from the centrifugal force and the drag force and that the centrifugal force and capillary force are the dominant force, which determines spin-off of a particle on the disk surface. Removal of particles smaller than several micrometers, which are the main source of TA generation, is extremely difficult since the adhesion forces exceed the centrifugal force. Lubricant types and manufacturing process also influence the particle removal. Lower bonding ratio and lower viscosity of the lubricant will help to increase the removal rate of the particles from the disk surface.