• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.1-12
• /
• 2008

This paper identifies public transit-poors and derives spatial characteristics of the poors' distribution in an urban area by utilizing buffering analysis of geographic information systems and remote sensing techniques in the case of Daegu metropolitan city. Since special attention is given to elderlies, this study assigns three hundred meter buffer from bus/subway station as service boundary for elderlies. The results of this study tell us that 1) the transit-poors are concentrated on suburban and rural regions, 2) high proportions of the transit poors are elderlies with spatial variations in many regions, 3) the main housing type of the transit-poors is single detached house. We expect that this study can contribute to build an effective policy-making by showing essential technical processes and methods in identifying policy-need groups and their characteristics of spatial distribution.

• Journal of the Korean Home Economics Association
• /
• v.40 no.5
• /
• pp.25-37
• /
• 2002

The purpose of this study is to give basic information in comparison of workspace of traditional housing between traditional Waga and Choga in Jeju. The subjects of this study are six Waga (roofing tee system), authorized as Jeju Folklore Materials and five Choga (roofing thatch system), authorized as National Major Folklore Materials. The results of this study were as follows. 1. Household workspaces in Waga were separated by three places: Jungji, Chatbang, and Gopang. In Choga, it was separated by two places, Jungji and Gopang. 2 As a number of Jungji, Waga had one, which meant that two or more generations shared the kitchen facilities. Choga, it had one or two Jungji, which meant that each generation used different kitchen facilities. 3. functional space of division Waga was specific. So, meal preparation was done in Jungji, and dining was done in Chatpang. However, in Choga, both meal preparation and dining were done in Jungji. 4. The sequence of space, in the JungjiGeriBulDong style, which Jungji was located in the detached building, showed that the circulation directs: Gopang->Sangbang->Chatbang->Madang->Jungji. AnGeriJungji style, which Jungji was located in the main building, showed that the circulation directs: Gopang->Sangbang(->Chatbang)->Jungji. 5. In the size ratio of household workspace to whole size of the house, Waga occupied 30%, and Choga occupied 21%.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.5-25
• /
• 2016

The purpose of this study develops the methodology to extract the poor deprived districts using the data from the national spatial data infrastructure portal. Particularly this study tries to select more acute indicators and to test the operability of such indicators. Also this study is focused on the versatile methodology that can be adjusted to incorporate alternative indicators that might be appropriate according to the hierarchy of the spatial unit. The indicator sets are composed of three dimensions: the poor class, the poor old housing, and poor residential neighborhood environment. Each representative indicator is selected based on the characteristics of the poor deprived districts. As a result, at the level of administrative Dong, key indicators for extracting the poor deprived districts are number of recipients of national basic living security per thousand persons and ratio of households living at old detached house. At the level of the national based zip code district, the ratio of buildings built on parcels located at roads below 4m in width, the ratio of small parcels below $60m^2$ and the ratio of poor old buildings are very important indicators. The result of grid analysis by overlaying the coverage of multiple indicators shows that relatively more vulnerable and deprived districts can be extracted at the small sub-district level. This study suggests the possibility to create the high value-added information, using the data from the national spatial data infrastructure portal. This methodology enables policymakers to select the priority target districts of poor deprived district more effectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.319-327
• /
• 2016

Korea faces a wide range of problems in areas such as safety, environment, and traffic due to the rapid economic development and urbanization process. Despite the local governments’ efforts to deal with electronic civil complaints and solve urban problems, civil complaints have been on the increase year by year. In this study, we collected civil complaint data over the last six years from a small and medium-sized city, Jinju-si. In order to conduct a spatial distribution pattern analysis, we indicated the location data on the area through Geocoding after classifying the reasons for civil complaints and then extracted the location data of the civil complaint occurrence spots in order to analyze the correlation between electronic civil complaints and land use. Results demonstrated that electronic civil complaints in Jinju-si were clustered in residential, central commercial, and residential-industrial mixed-use areas—areas where land development had been completed within the city center. After analyzing the civil complaints according to the land use, results revealed that complaints about illegal parking were the highest. Regarding the analysis results of facility distribution within a 50m radius from the civil complaint areas, civil complaints occurred a lot in detached housing areas located within the commercial and residential-industrial mixed-use areas. In the case of residential areas(old downtown), civil complaints were condensed in the areas with many ordinary restaurants. This research explored civil complaints in terms of the urban space and can be expected to be effectively utilized in finding solutions to the civil complaints

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.52-59
• /
• 2015

Cross-cut disks from small diameter oak logs were thermally modified and developed to make accessories such as a brooch. However it is known that domestic oaks are refractory and it is hard to dry their cross-cut disks without any drying defects. The cross-cut disks of Quercus variabilis (7 mm long in the longitudinal direction) were forced to dry in air at two different air velocities in summer and fall season, and their drying yields were investigated. Under the same condition, the average final moisture contents (MCs) of the specimens dried in the fall were lower than those dried in the summer. The average final MCs of the small diameter specimens dried at higher air velocity were slightly lower than those at lower air velocity while those of the large diameter specimen were not influenced by the air velocity. The number of the large diameter specimens with cross checkings was higher than that of the small diameter specimen. This discrepancy between two different diameters was twice in the fall, while it was more than four times in the summer. The large diameter specimens dried at low air velocity in Summer were cross-checked most, which was attributed to repeated water condensation and evaporation due to high humidity and low air velocity.

• Conservation Science in Museum
• /
• v.25
• /
• pp.9-26
• /
• 2021

This paper describes the production methods that were originally used for an arrow bundle excavated from a Bronze Age residential area in Auraji in Jeongseon, Gangwon-do Province and the conservation treatment process that it subsequently underwent. An arrow conventionally consists of an arrowhead and a shaft. It is rare to excavate a shaft along with an arrowhead in a complete form since the shaft is made of organic materials. Notably, the arrow bundle from the Auraji site is of great significance as it shows traces of tangless stone arrowheads attached to charred shafts and offers an important case of the split end of a piece of a tree being inserted into an arrowhead. For a further examination of the characteristics of the arrows from Auraji, microscopic investigation was conducted and the type of wood used for the arrow shafts was examined. The sequence and direction of processing and the particle sizes of the grinding tools were revealed through the analysis of traces of grinding on the stone arrowheads. The shaft is presumed to have been made from a green length of three-year-old willow (Salix spp.). A curing agent with a high degree of waterproofing and reversibility was used during the on-site curing process according to demands of the surrounding environment, and a technique that the authors call the "Bridge" method was used for emergency collection of the relics. Once the bundle was transferred to the conservation treatment lab, reinforcing materials were carefully chosen as it was important not to damage the relics during the process of turning them for the repair of their reverse sides. For this purpose, artificial clay was selected since it can safely bear a load and has excellent physical properties. Finally, detached parts were rejoined, the relics and their surrounding materials were cleaned, and the bottom sides were finished with epoxy resin prior to the display of the relics at the museum.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.132-151
• /
• 1988

This study was conducted to establish the control program for preventing unfavorable health effects of nitrogen dioxide($NO_2$) exposure in homes by preparing the fundamental data for evaluation of relation-ships between $NO_2$ levels and influencing factors through measurements of indoor-outdoor $NO_2$ levels and personal $NO_2$ exposures for housewives with questionnaire survey on 172 homes in Pusan area from April to June, 1987 $NO_2$ measurements were made by using diffusion tube samplers(Palmes tube $NO_2$ sampler) for one week at 4 sites in homes ; kitchen(KIT), bedroom(BED), living room(LIV), outdoor(OUT) and near the collar of housewives(personal exposure livel, PNO). The details of questionnaire were number of household members(FAM), number of regular smokers (SMOKER), daily number of meals eaten(MEAL), type of housing units(HOUSE), location of house with distance from the heavy traffic roads as walking time(DIST), and of kitchen(KAREA), kind of cooking fuels(FUEL), cooking time of each meal(CTIME), usage of kitchen fan for cooking(FAN), type of heating facilities(HEAT) and so on of subject homes. The Obtained results were as fellows : 1) The mean $NO_2$ level was significantly higher at indoors than outdoors(p<0.01) and the kitchen $NO_2$ level was the highest with $33.7{\pm}13.6ppb$(9.5-81.5ppb). The mean personal exposure level of $NO_2$ for housewives was $20.6{\pm}8.8ppb$(3.1-46.9ppb). 2) The mean indoor $NO_2$ level was significantly higher in the group of household members above 5 than below 4(p<0.05), in detached dwellings than apartments(p<0.001), within 5 minutes of distance than over 5 minutes(p<0.001), in the group of unusing fan(p<0.001), in the group of longer cooking time(p<0.001), and it was in order of coal briquette, gas, electricity and oil by kind of cooking fuels(p<0.05). 3) Variables showing significant correlation(p<0.001) with indoor $NO_2$ level were kitchen $NO_2$ level(r=0.8677), cooking time(r=0.5921), outdoor $NO_2$ level(r=0.5192), personal $NO_2$ exposure level(r=0.4615), usage of kitchen fan(r=0.3573) and location of house(r=-0.2988) 4) As a result of multiple regression analysis, the most significant influencing variable to the kitchen $NO_2$ level was cooking time[KIT=$-0.378{\pm}11.772$(CTIME)+0.298(OUT)+3.102(FAN)], it was kitchen $NO_2$ level to the indoor $NO_2$ level[IND=6.996+0.458(KIT)+0.230(OUT)-1.127(KAREA)], and it was indoor $NO_2$ level to the personal $NO_2$ exposure level[PNO=15.562+0.729(IND)-4.542(DIST)-0.200(KIT)] 5) It was recognized that aritificial ventilation in the kitchen, suppression of unnecessary combustion and replacement of cooking fuel, as much as possible, were effective means for decreasing indoor $NO_2$ levels in homes.