• Journal of Life Science
• /
• v.10 no.2
• /
• pp.202-209
• /
• 2000

The factors affecting chemical composition of green tea (Camellia sinensis L.) during extraction process were temperatures and times. The optimum extraction conditions were measured in relation to the changes of chemical compositions from water extracts of green tea (Camellia sinensis L.) under different extraction temperatures (50, 70, 9$0^{\circ}C$) and extraction times (1, 3, 5 minute). The change of color intensity during browning reaction, flavonoid components, contents of total phenols and hydrogen donating activity (reducing activity for $\alpha$, $\alpha$'-diphenyl-$\beta$ -picryhydrazyl) of water extracts form green tea increased as extraction temperatures increased from 50 to 9$0^{\circ}C$ and extraction times prolonged from 1 to 5 min. The contents of important free sugars such as sucrose and glucose slightly increased as the extraction time was prolonged, while little difference in the content of fructose with the prolonged extraction time. Catechins contents extracted from the commercial steamed green tea were increased at higher temperature and longer extraction time. Epigallocatechin (EGC) extracted from 9$0^{\circ}C$ (extraction time 5 min). presented 99.9 mg/g in highest composition of catechin followed by epigallocatechin gallate (EGCg), epicatechin (EC), epicatechin gallate (ECg). The content of vitamin C extracted from green tea was increased about 2 times as the extraction temperature increased from 50 to 9$0^{\circ}C$ and as the extraction time increased from 1 to 5 min. with exception at 9$0^{\circ}C$(extraction time:5 min) which showed less vitamin C content than 7$0^{\circ}C$(extraction time : 3 min) probably due to possible destruction of vitamin C by high temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.137-140
• /
• 2008

If the flexural member of concrete is designed using the FRP rebar, suddenly brittleness destruction resulted from the fracture of FRP rebar is generated in the extreme situation because of brittleness characteristics of FRP rebar and concrete when designed to be less than balanced reinforcement ratio, so it is recommended to design the flexural member of concrete to be more than balanced reinforcement ratio. In ACI 440.1R-06 proposes the different bending strength decrease coefficient according to destructive form of concrete flexural member using the FRP rebar. However, ACI 440.1R-06 applies the same strength decrease coeffient to all FRP rebars made of diverse materials. If the same strength decrease coefficient is applied to all FRP rebars, effect of increasing the reinforcement ratio and selection of FRP rebar will be considerably limited. In this regard, we are to propose the formula to calculate the bending strength decrease coefficient in consideration of change in characteristics of FRP rebar and L/D through the reliability analysis in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.190-194
• /
• 2003

Dielectric thin films of (P $b_{0.72}$,L $a_{0.28}$) $Ti_{0.93}$ $O_3$ (PLT(28)) have been deposited on Pt(111)/Ti/ $SiO_2$/Si(100) substrates in-situ by pulsed laser deposition using different annealing and deposition Processes. We have investigated the effect of hydrogen annealing on the ferroelectric properties of PLT thin films and found that the annealing process causes the diffusion of hydrogen into the ferroelectric film resulting in the destruction of polarization. We have tried to form the film by a two-step deposition process In order to improve electrical property. Two-step process to grow PLT films was adopted and verified to be useful to enlarge the grain size of the film and to reduce the leakage current characteristics. Structural properties and electrical properties including dielectric constant, ferroelectric characteristics, and leakage current of PLT thin films were shown to be strongly influenced by grain size. The film deposited by using two-step Process including pre-annealing treatment has a strongly(111) orientation. However, the films deposited by using single -step process with hydrogen annealing process show the smallest grain size. The film deposited by using two-step process including pre-annealing treatment shows the leakage current density of below 10$^{-7}$ A/c $m^2$ for the field of smaller than 100 kV/cm. However, the films deposited by using single-step process with hydrogen annealing process and pre-annealing process show worse leakage current density than the film deposited by using two-step process including pre-annealing treatment.tment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1137-1145
• /
• 2013

In this study, exergy analysis of a thermally activated refrigeration cycle, a combined organic Rankine cycle (ORC), and a vapor compression cycle (VCC) were conducted. It is considered that a system uses a low-temperature heat source in the form of sensible heat, such as various renewable energy sources or waste heat from industries, and one of eight working fluids: R143a, R22, R134a, propane, isobutane, butane, R245fa, or R123. The effects of turbine inlet pressure and the working fluid selected on the exergy destructions (anergies) at various system components as well as the COP and exergy efficiency of the system were analyzed and discussed. The results show that the component of the greatest exergy destruction in the system varies sensitively with the turbine inlet pressure and/or working fluid.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.331-335
• /
• 2020

The red swamp crawfish (Procambarus clarkii) is native to northeastern Mexico and south-central United States. But the species has been introduced to other parts of the world, and cause ecological problems including habitat destruction and competition with indigenous species. In this study, we identified the distribution of P. clarkii in the freshwater system in Korea. P. clarkii were collected in the field sampling and it is assumed that they have settled in major domestic water systems of Korea including six points in the Yeongsangang River, five points in the Mangyeonggang River, two points in the Seomjingang River, and one point in the Geumgang River. In particular, more than 20 individuals were found in Seobongri, Wanjugun and Mosanri, Hampyeonggun, which are believed to form a relatively large population. Considering high mobility and environmental adaptability of the species, the possibility of their dispersal to other water systems is very high. Therefore, continuous monitoring and assessment of their distribution and potential spread are required and effective management to remove them policy is needed to prevent damage in the Korean ecosystem.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.825-833
• /
• 2021

In flight tests, aircraft moves in real time, so it is important that data from instrumentation/measurement equipment used to determine aircraft status are processed in necessary form and transmitted to flight control systems in real time. Therefore, through telemetry data processing time reduction and processing cycle improvement in flight test control computer data processing system, in order to provide faster slave-data and safety judgment information to radar/telemetry slave-data processing, flight safety analysis system, emergency destruction transmission system, etc., we developed a PCM processing system that can be operated independently by installing data processing software that can receive and process PCM data in current telemetry data processing system and radar information at the same time. In this paper, we explain classified software functions in detail, starting with overall structure of PCM data processing systems developed by supplementing existing systems. Additionally, PCM data processing system will be supplemented through system stabilization and test operation.

• Convergence Security Journal
• /
• v.23 no.5
• /
• pp.181-187
• /
• 2023

Recently, military operations have been aimed at winning using various information, analysis, weapons, and operation systems. These systems should consist of integrated composition and the function of analyzing and sharing data. Accordingly, military C4I collects and analyzes a lot of data and produces and shares secrets to perform effective operations. However, C4I cannot operate in electronic form from secret production to disposal. And as it is managed based on the output, problems such as difficulty in management and loss/leakage arise. Therefore, in this paper, we propose an ESDMB(Electronic Secret Document Management whit Bloockchain) plan based on blockchain technology to manage all secrets in electronic document format and provide integrity and denial prevention. In particular, the blockchain-based proposal method will be suitable as a protection measure against manipulation and leakage, from secret production to destruction.

• The Korean Journal of Zoology
• /
• v.8 no.2
• /
• pp.89-127
• /
• 1965

1. This report is on the outcome of observation made up the breeding process of Narcissus flycatcher, Muscicapa narcissina zanthopygia, using 15 ness-boxes at Seoul and Kwang Nung Experimental forest in 1964, and the relevant feeding habit was studied by the collar method of wrapping the necks of thenestlings for 50-60 minutes or more in some cases from 1963 to 1964. 2. The Narcissus flycatcheris a common summer resident throughout Korea arriving at the end of April. The earliest data of arrival of this species in Seoul, is April 26, 1964. They migrate southward from the later part of September to early part of October. 3. In a week after their arrival , they start to build nest after a brief courtship. Male and female prepare their nest ina nestboxes in 4 or 5 days. Nests are usually found in the moss, which provide definite frame-work. The inner side of the nest is usually composed of roots of Gramineae or leaves of pine, oak or other broad leave tree. 4. The laying period is generally from the later part of April to the middle of June : and the number of eggs laid is from 3 to 8 , therefore 5 in average : eggs are pink with traces of milky yellow blending of light auburn and orange red spots and chicken-egg-like in shape. 5.The incubation takes place for 7-12 days from the middle part of May to the middle of June, in the order of male and female . The hatching rate tends to increase in proportion to clutch size. 6. The feeding period usually lasts 15 days in average from the early part of June to the middle of July and the feeding urge tends to increase in proportion to brood size. 7. The animals invading into their nest-boxes are red ants, chipmunks, bees , barkbeetles and philippine red-tailed shirkes, etc. 8. On the basis of analysis covering 714 birds in 31 nests, the food they consumed during the nesting period of nestlings were mostly of animal matters composing of : insect larvae form-39. 88% insect adult form 36.26%, insect pupae-0.19%, spider-17.75% and other animal matters 5.92% , Besides a small amount of plant pieces were found . As to the insect larvae, Lepidoptera was the largest in the content followed by Hymenoptera , Orthoptera and Coleoptera. As to the insect adult, Diptera was the largest in the content followed by Coleoptera, and Hymenoptera. In view of forest protection, noxious insect was of 69.38%, useful insect 4.39%, and spider 17.75%. 9. The rich assortment of its food, the ability of acquiring various insect (adults as well as larvae), its destruction of great numbers of harmful insects , and its quick assimilation artificial nesting with the nest-boxes of 2.5-3cm entrance hole employed, allow us to conclude that the flycatcher may be successfully employed in the elimination of fores pests. The above results are only that part obtained near Seoul in the middle of Korea, however, if we would extend the scheme to other broad areas using similar techniques, the nest-boxes could not only be well used by the birds, but also it would help to prevent the increase of harmful. insects.

• Sim-seong Yeon-gu
• /
• v.38 no.2
• /
• pp.239-268
• /
• 2023

Humanity has faced destruction(chaos) due to catastrophes (Covid-19, war, earthquake) and awaits a new restoration. For civilizations and individuals, creation or creativity is essential to psychic development. Creativity is the driving force that renews an individual when a new stance and attitude of consciousness or a new adaptation to reality is desperately needed in the depth of the human mind. This article is the result of an exploration of the nature and characteristics of creativity presented by a series of four dreams. First, the definition and form of creativity were explored in the context of religion, mythology, and history of Eastern and Western. While Western mythology refers to creation or creativity originating from God, ancient China viewed creativity as expressed through the interaction of yin and yang, the movement of Tao. In East and West, the form of creation is divided into creation from nothing, creation from matter, and creation through dissolution from the matrix, which psychologically suggests that creativity or creation originates from the unconscious, the seedbed of infinite potential and creative power. Next, with insights from the second dream, the characteristics of creativity were discussed. Creativity occurs through transcendent function and 'going beyond the frame of reference,' that is, 'transgressivity.' Third, the nature of creativity was explored as the creativity of the unconscious aims for regeneration and drives the renewal of Self archetypal images within the collective and individuals. Ultimately, the creativity of the unconscious is the goal of the whole psyche and aims for individuation to become the whole. Realizing the creativity of the unconscious is the fate of humans as the second creator.