• 한국통신학회논문지
• /
• 제17권11호
• /
• pp.1271-1278
• /
• 1992

본 논문에서는 주파수 도약 방식을 이용한 대역확산 다중 통신 시스템에서, 인접채널 상호간섭에 의한 BER을 계산하고, 비교하기 위한 실제적인 모델이 제시되었다. 이때 BER은 망동기가 되었을 경우와 안되었을 경우에 대하여 각각 계산 및 측정하여 비교하였다. 동기식과 비동기식의 두 가지 경우에 있어서 주파수 도약 시스템을 제작하였으며 BER이 측정되었다. 본 연구의 결과에 의하면, 동기식이 비동기식 보다 성능이 우수하다는 것이 입증되었다. 또한 이러한 컴퓨터 시뮬레이션 모델은 향후 이동통신 환경에서 실제적인 주파수 도약시스템을 설계하는데 매우 유용하다.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.10-19
• /
• 2022

AI-based Network Intrusion Detection Systems (AI-NIDS) detect network attacks using machine learning and deep learning models. Recently, unsupervised AI-NIDS methods are getting more attention since there is no need for labeling, which is crucial for building practical NIDS systems. This paper aims to test the impact of designing autoencoder models that can be applied to unsupervised an AI-NIDS in real network systems. We collected security events of legacy network security system and carried out an experiment. We report the results and discuss the findings.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.260-266
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance according to the types of atrium of office building. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was understood, and the followings are the considerations for designing an atrium. First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning an atria within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.720-724
• /
• 2007

Recently, in accordance with increase of the desire for Sports for All(Life Sports), the swimming pools in many areas are under construction. However, since they used many of the reflexible finish-materials on account of the characteristics of hydrophilic space, most of the Indoor Swimming Pools are generating the excessive reverberation. Such reverberation is bringing about the problem that obstructs the oral communication between the coach and the player, and the Clearness of Sound, besides the sport activity. On this viewpoint, on the object of the actually built indoor swimming pool, after the conduct of an optimized acoustics design by the remodeling through a computer simulation, and by carrying out the Psycho-Acoustics Experiment utilizing of Auralization Technique which is able to experience Virtual Sound Field at the stage of designing, then this thesis has attempted to appraise on the acoustic condition after the completion of construction. It is considered that such result of the study could be utilized as the useful data that enables to improve the curtailment effect of construction cost as well as the acoustic capability, by means of the presupposition control on the acoustic problem from the stage of design, for the occasion when the similar indoor swimming pool is planning to build, henceforth.

• 대한산업공학회지
• /
• 제22권2호
• /
• pp.265-276
• /
• 1996

Multimedia systems present information by various media, for example, video, sound, music, animation, movie, etc., in addition to the text which has long been used for conveying the information. Among many multimedia applications, the multimedia information retrieval systems commercialized in the forms of multimedia encyclopedia CD-ROMs, benefited from various media for their ability to present information in an efficient and complete way. But using several media, on the other hand, may cause end users' confusion and furthermore, poorly designed user interface often exacerbates the situation. In this study, the multimedia systems were studied from the standpoint of usability. The conceptual framework of the user interface of the multimedia system was newly defined. And 100 initial variables for user interface design of general multimedia systems were suggested through literature survey and expert opinions based upon the framework developed. Among various application areas, the multimedia information retrieval systems were chosen for investigation, and 36 variables particularly relevant to user interface of the multimedia information retrieval systems were selected. According to the sequential research strategy, the variables that were considered to be most important were finally selected through a screening stage. A part of selected variables were verified through a human factors experiment as the first step of sequential research. Based upon the result of the experiment, guidelines for user interface design were provided. For future study, the variables remained will be Investigated and the study will expand to another application areas.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.96-102
• /
• 2008

For centuries now, wind tunnels have been a key element in scientific research in a number of fields. Experimenting with racecars, airplanes, weather patterns, birds, and various other areas has been made much easier because of its development. In the racing field, for example, the information gathered from this testing can mean the difference between winning and losing a race. Weather simulations can also provide valuable information regarding building stability and safety. This has become very important when designing buildings today. Valuable information concerning bird flight has also been collected based on wind tunnel testing. Wind tunnels have a variety of important uses in the world today. Wind tunnel that used here is an open loop low speed wind tunnel. The fundamental principles of this tunnel is moving the air using exhaust fan In the rear side, and placing the cube in the external balance system which used to measure the working force. This experiment is using 50mm cube of finished wood. From this experiment we can get Drag Force (FD), The Reynolds Number (Re) and The Coefficient of Brae (CD).

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.251-258
• /
• 2009

개념설계단계에서 전투차량은 크게 화력성능, 기동성능과 체계의 물리적 특성으로 나누어진다. 본 연구에서는 전투차량체계를 구성하는 3가지 특성 중 화력성능의 최적화로 제한한다. 체계의 개념설계 단계에서 화력성능에 영향을 미치는 주요 인자로 파괴효과에 직접적인 영향을 주는 탄의 중량과 원거리 사격을 고려한 최대사거리를 분석대상으로 선정하였다. 최대 사거리 분석을 위하여 강내탄도와 강외탄도해석은 질량 집중 모델, Le Duc모델과 질점탄도모델을 사용하여 분석하였다. 실험계획법과 회귀분석으로 반응표면식을 구성하고 선정된 인자를 반응표면법으로 최적화하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.37-40
• /
• 1999

ETRI has successfully completed and delivered to KARI the KOMPSAT Mission Control System. This system was designed to work in the conventional TT&C modulation scheme with the pre-assigned frequencies. As a way to accelerate in catching up with future TT&C technology evolutions, a preliminary study needs to be carried out to prepare for the development of a spread spectrum applicable to TT&C. A brief study was carried out to review some points to be considered in designing and implementing spread spectrum schemes to the ground TT&C system intended for a LEO spacecraft. Also a simulation and link design revisit was performed to see the operational and technical benefits with the KOMPSAT TT&C parameters. An experiment concept is proposed to test as many functions at a time once the prototype is developed. In this configuration, a ground-model TT&C transponder is connected via LAN to the ETRI-developed KOMPSAT S/W simulator and linked to the KOMPSAT TM/TC processing s/w via spread spectrum signals through a GEO satellite bent-pipe link. A satellite data relay link simulation could be carried out in this configuration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.347-349
• /
• 2014

Model verification and validation (V&V) is a current research topic to build computational models with high predictive capability by addressing the general concepts, processes and statistical techniques. The hypothesis test for validity check is one of the model validation techniques and gives a guideline to evaluate the validity of a computational model when limited experimental data only exist due to restricted test resources (e.g., time and budget). The hypothesis test for validity check mainly employ Type I error, the risk of rejecting the valid computational model, for the validity evaluation since quantification of Type II error is not feasible for model validation. However, Type II error, the risk of accepting invalid computational model, should be importantly considered for an engineered products having high risk on predicted results. This paper proposes a technique named as the response-adaptive experimental design to reduce Type II error by adaptively designing experimental conditions for the validation experiment. A tire tread block problem and a numerical example are employed to show the effectiveness of the response-adaptive experimental design for the validity evaluation.

• 한국과학교육학회지
• /
• 제17권2호
• /
• pp.201-207
• /
• 1997

This study was performed to survey the achievements in problem solving by the inquiring experiment, which was done by the superior group in the traditional cocepts-centered written tests. The purpose of this study was to identify characteristics of inquiring experimental assessment by analyzing differences between concepts-centered written and inquiring experimental tests. The subjects of this study was 211 applicants. They are the superior group of the 9th grade students, and score in the top 1% of total achievements percentage in school. They also have passed the primary entrance examination. The inquiring experimental test was developed according to the curriculum in school, and is composed of 5 subcategories: problem-perception and formulating hypothesis, designing an experiment, carring out an experiment, recording data and drawing conculsion, and generalizing conculsions and communicaton. The checklists of each subcategory were made and testing methods were divided into observation and report. The major results of this study are as follows: 1. The achievements in each subcategory of inquiring experimental performance were very low in the superior group who took the concepts-centered written tests. 2. The results of factor and correlation analyses in this study confirmed the abilities measured by inquiring experimental assessment differed from abilities measured by existing tests. These results indicated that even students who achieved high in scientific knowledge, these abilities were not automatically transformed inquiry process which many other abilities were integrated into. Therefore, problem solving ability requires integrated abilities which are fostered by inquiring experimental tasks. This suggests that new instrument for assessment must be developed to measure integrating ability especially where scientifically gifted students are selected, or where entrance examinations to the science schools are administered.