• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.253-272
• /
• 2015

Purpose: The purpose of this study is to enhance the reliability of quality inspection by standardize the fineness test method of the thermal insulator of military textiles Methods: We have measured the thermal insulator of military textiles by microscope with three different ways and the effectiveness of their difference were analyzed by one-way layout design. Results: We have suggest the standardized the fineness test method of the thermal insulator of military textiles through advanced research. As a result we have verified hollow ratio of heat insulating fiber affect fineness test methods. The fineness test method for the thermal insulator applied with different methods following hollow ratio. We have verified that when the hollow ratio over 90%, the fineness of the thermal insulator measured from fiber-length, if it has over 80%, the cross-section length of hollow and if it has less 80%, the cross-section area of hollow is applied, respectively. Conclusion: This study indicated that the test method of fineness shows high reliability. Heat insulating fibers which have high evenness shows narrow variations(5/% or less, only CV 25%) irrespectively under different testing equipment or institute. Based ons the results, we have suggest the standardization of test methods for fineness by microscope method and produced the registration of Group Standard in Korean Standards Association.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.95-106
• /
• 2008

Eco-friendly material and implementation methods have become important along with the existing standardized maintenance concept for the irrigation and flood control. However, the intrinsic function of the hydraulic structure is water supply and disaster prevention. Therefore, the material and work methods should be considered both eco-friendliness, durability and safety which are prerequisite elements to maintain the engineering function. In this study eco-friendly material and work methods would be classified into the vegetation based system, eco-friendly concrete system and stone-material system according to the characteristics of material. The quality standard for durability followed KS specification and related regulations. The quality standard for safety and eco-friendliness was set after literature review, and the database was developed using the standard. The structure applicable to onsite - the eco-friendly material and work method were classified based on the function and material of the hydraulic structure. Finally, database has been established for convenient management and selection of the proper material and work method. The eco-friendly material and work method could be searched easily for the convenience of the users, and the web-based data system has been developed for continuous registration of the material and work methods to be developed in the future.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.1
• /
• pp.27-34
• /
• 2018

Various messages generated in vehicles are transmitted based on the wireless telecommunication which is a core technology of vehicle to everything (V2X). However, the hackers attack them upon penetration to the system and network to cause the generation of users' inconveniences for vehicular communication. Moreover, huge damage could be occurred in terms of physical and materialistic areas if the users in the vehicles were attacked in the communication environment. Therefore, this study was to design the safe communication protocol using hash tree technique in the V2X environments. Using hash tree technique, processes of issuing certificate and registration and communication protocol were designed, and safety analysis was performed on the attacking technique which is occurred in the existing vehicles. Approximately 62% of decrease in the capacity analysis was found upon comparative analysis of telecommunication processes with the system to issue the certificate which is used in the existing vehicles.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.1
• /
• pp.101-127
• /
• 2018

The systematic management of research data is vital because it increases research data's value for research reproduction, verification, and reusability. Standard metadata will play a key role in research data registration, management, and data extraction. Research data has various structural relationships, such as research, research data, data sets, and files, and associated with entities such as citations and research results. The study proposes an ontology model for research data management. It also suggests the application of ontology to NTIS. Previous studies, metadata standard analyses, and research data repository case studies were conducted.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.82-85
• /
• 2004

This paper proposes an advanced circuit for the capacitive type fingerprint sensor signal processing and an effective isolation structure for minimizing an electrostatic discharge(ESD) influence and for removing a signal coupling noise of each sensor pixel. The proposed detection circuit increases the voltage difference between a ridge and valley about $80\%$ more than old circuit. The test chip is composed of $160\;\times\;192$ array sensing cells $(9,913\times11,666\;um^2).$ The sensor plate area is $58\;\times\;58\;um^2$ and the pitch is 60um. The image resolution is 423 dpi. The chip was fabricated on a 0.35um standard CMOS process. It successfully captured a high-quality fingerprint image and performed the registration and identification processing. The sensing and authentication time is 1 sec(.) with the average power consumption of 10 mW at 3.0V. The reveal ESD tolerance is obtained at the value of 4.5 kV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.462-466
• /
• 2005

Dynamic (On-line) signature verification system consists of preprocessing, feature extraction, comparison and decision process for internal processing, and registration and verification windows for the user interface. We describe an implementation and design for an advanced dynamic signature verification system. Also, we suggest the method of feature extraction, matching algorithm, efficient user interface and an objective criteria for evaluating the performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.322-325
• /
• 1999

There is a number of national internet web sites which provide educational information services and contents. One of the more important issues in educational services is to offer a set of educational contents of high quality. It is important to develop the instruction-learning efficiency based contents, considering the variety of learners and content types. In this paper, we present the design of a cyber teaming system using distributed learning standard technology. In this cyber teaming system we particularly describe its course management service which allows to users the registration, deletion, modification, contents conversion, and contents learning.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.762-770
• /
• 2014

Tangible Space Initiative (TSI) is a new framework that can provide a more natural and intuitive Human Computer Interface for users. This is composed of three cooperative components: a Tangible Interface, Responsive Cyber Space, and Tangible Agent. In this paper we present a Tangible Tele-Meeting system in TSI, which allows people to communicate with each other without any spatial limitation. In addition, we introduce a method for registering a Tangible Avatar with a Tangible Agent. The suggested method is based on relative pose estimation between the user and the Tangible Agent. Experimental results show that the user can experience an interaction environment that is more natural and intelligent than that provided by conventional tele-meeting systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.60-64
• /
• 2007

Recently, real time auction system is increasingly required as internet grows up. According to this social requirement change, this paper designed and implemented a real time auction system. The system registers the goods for auction which customers add to their interested list in their point of view, automatically responds their information and gives a chance to the customer to apply to auction immediately via internet, and performs registration such as customer's information, goods, interested goods, etc. And, the customers on the system can purchase their interested goods rapidly and easily by check-up service of their interested and auctioned products without regarding to place or time through a mobile terminal.

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.27-47
• /
• 1998

The primary objective of this research is to provide the basis of total quality management policies by reviewing previous studies which investigated effective ways to reduce product liability exposure. Specifically, the present study intends (1) to examine recent patterns and trends of product liability law in OECD countries, (2) to propose quality management policies for preventing product liability litigations, and (3) to guide the proper implementation process of ISO 9000 certification programs. The survey results show that the shift from a negligence law theory to strict liability is evident in most countries. The trend has led to make it easier for consumers to bring product liability lawsuits. Furthermore, the damage awards won by consumers have been drastically increasing. To minimize product liability exposure, manufactures should reflect comprehensive product safety concepts in establishing total quality management policies. Cooperative activities are also required between departments in companies to reach safe and satisfactory quality level. These quality management activities should be performed consistently during the total product life cycle. Failure to comply with the ISO 9000 certifications might be used as an evidence of negligence or as evidence of a design defect in court. Previous lawsuit cases, however, reveal that ISO 9001-9003 registration process alone is not sufficient in terms of product liability pervention perspectives. Therefore, manufactures should take into account ISO 9004 before implementing any other section of ISO 9000 standards.