• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.849-851
• /
• 2003

This paper is deal with the method of design for optimum thrust model using genetic algorithms in slotless Permanent Magnet Linear Synchrous Motor (PMLSM). Characteristic analysis method is used 3D space harmonic analysis method. Design parameters are PM width and coil width.

• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.35-46
• /
• 2003

Conventional analysis and design of steel structures are performed using the assumption of a either fully rigid or pinned. However, every steel connection lies in between fully rigid and pinned connection. So, It is important to consider the connection for steel structure design. In this paper Computer-based second-order elastic analysis is used to calculate one story two bay and two story three bay for steel structures with semi-rigid connection. Genetic Algorithms(GAs) and Sequential Unconstrained Minized Technique(SUMT) dynamic programming is used to the method for optimum design of steel structures. The efficiency and validity of the developed continuous and discrete optimum design algorithm was verified by applying the algorithm to optimum design examples.

• 전자공학회논문지A
• /
• 제31A권4호
• /
• pp.106-115
• /
• 1994

This paper presents the design of a technology mapping system for optimizing delays of combinational and synchronous sequential logic circuits. The proposed system performs delay optimization for combinational logic circuits by remapping, buffering, and gate merging methods through the correct delay calculation in which the loading values are considered. To get time optimized synchronous sequential circuits, heuristic algorithms are proposed. The proposed algorithms reallocate registers by considering the critical path characteristics. Experimental results show that the proposed system produces a more optimized technology mapping for MCNC benchmarks compared with mis-II.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.463-470
• /
• 2007

Colored Petri net model which is a model of discrete event systems is considered in this work. A supervisory controller which enforces reversibility and liveness simultaneously is presented. Furthermore, the algorithms, written by pseudo-code, are presented for the supervisory controller design. A program is developed to implement these algorithms.

• Wind and Structures
• /
• 제32권1호
• /
• pp.71-80
• /
• 2021

In steel cable bridges, the use of magnetorheological (MR) dampers between butt cables is constantly increasing to dampen vibrations caused by rain and wind. The biggest problem in the actual applications of those devices is to launch a kind of appropriate algorithm that can effectively and efficiently suppress the perturbation of the tie through basic calculations and optimal solutions. This article discusses the optimal evolutionary design based on a linear and quadratic regulator (hereafter LQR) to lessen the perturbation of the bridges with cables. The control numerical algorithms are expected to effectively and efficiently decrease the possible risks of the structural response in amplification owing to the feedback force in the direction of the MR attenuator. In addition, these numerical algorithms approximate those optimal linear quadratic regulator control forces through the corresponding damping and stiffness, which significantly lessens the work of calculating the significant and optimal control forces. Therefore, it has been shown that it plays an important and significant role in the practical application design of semiactive MR control power systems. In the present proposed novel evolutionary parallel distributed compensator scheme, the vibrational control problem with a simulated demonstration is used to evaluate the numerical algorithmic performance and effectiveness. The results show that these semiactive MR control numerical algorithms which are present proposed in the present paper has better performance than the optimal and the passive control, which is almost reaching the levels of linear quadratic regulator controls with minimal feedback requirements.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.629-638
• /
• 2000

알고리즘의 용이성과 전역적 최적해로의 수렴가능성 등의 이점을 가진 SA알고리즘은 구조최적화문제에 활발하게 적용되고 있으나 냉각스케줄의 설정, 모호한 종료기준, 과도한 반복해석 등의 문제점을 가지고 있다. 그러므로 본 논문에서는 기존 SA알고리즘의 단점을 보완한 MSA 알고리즘을 개발하고자한다. MSA 알고리즘은 수렴에 요구되는 반복수를 감소시키고 국부최소점이 많은 동적최적화문제의 초기설계 선택의 자율성을 확보하기 위하여 SQ 및 SA의 2단계로 구성하여 개발하였다. 또한 기존 연구에서 제안된 냉각 스케줄에 의한 수렴성 등을 비교분석하여 구조최적화에 적합한 냉각스케줄을 제안하여 그 성능을 평면가새골조 구조물의 최적내진설계에 적용하여 분석하였다.

• 전자공학회논문지SC
• /
• 제40권5호
• /
• pp.317-325
• /
• 2003

2관성 시스템을 제어할 때 자주 발생하는 진동은 빠른 속도 응답을 얻거나 외란 제거를 어렵게 한다. 본 논문은 2관성 모터시스템에 대해서 유전자 알고리즘을 사용하여 세 가지 속도 제어기(I-P, I-PD, 상태 피드백)의 자동 극배치 제어기를 설계하는 방법을 제시한다. 오버슈트와 세틀링 시간을 줄이는 관점에서 유전자 알고리즘을 사용하여 최적의 파라미터를 선정한 다음 이들을 각 제어기의 이득을 계산 할 때 사용한다. 몇 가지의 시뮬레이션을 통해서 제안한 제어기의 성능을 보인다. 제안한 제어기는 유연한 샤프트를 갖는 2관성 모터 시스템의 제어기의 자동 설계법이 될 수 있다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.93-101
• /
• 1997

This paper describes the application of Genetic Algorithms(GAs) to nonlinear constrained mixed optimization problems. Genetic Algorithms are combinatorial in nature, and therefore are computationally suitable for treating discrete and integer design variables. But, several problems that conventional GAs are ill defined are application of penalty function that can be adapted to transform a constrained optimization problem into an unconstrained one and premature convergence of solution. Thus, we developed an improved GAs to solve this problems, and two examples are given to demonstrate the effectiveness of the methodology developed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.336-339
• /
• 1995

An approach to efficient implementation of real-time control systems is presented in this paper. A compiler for translation of control algorithms is used in combination with a general program for real-time control. The compiler translates control algorithms written for the simulation in a design language to an implementation language. The translated algorithms are then automatically incorporated in the real-time control program.

• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.165-170
• /
• 2023

Scheduling algorithms plays a significant role in optimizing the CPU in operating system. Each scheduling algorithms schedules the processes in the ready queue with its own algorithm design and its properties. In this paper, the performance analysis of First come First serve scheduling, Non preemptive scheduling, Preemptive scheduling, Shortest Job scheduling and Round Robin algorithm has been discussed with an example and the results has been analyzed with the performance parameters such as minimum waiting time, minimum turnaround time and Response time.