• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1957-1958
• /
• 2008

The Logic Built In Self Test (LBIST) technique is substantially applied in chip design in most many semiconductor company in despite of unavoidable overhead like an increase in dimension and time delay occurred as it used. Currently common LBIST software uses the MISR (Multiple Input Shift Register) However, it has many considerations like defining the X-value (Unknown Value), length and number of Scan Chain, Scan Chain and so on for analysis of result occurred in the process. So, to solve these problems, common LBIST software provides the solution method automated. Nevertheless, these problems haven't been solved automatically by Tri-state Bus in logic circuit yet. This paper studies the simulator and algorithm that judges whether Tri-state Bus lines is the circuit which have X-value or One-hot Value after presuming the control signal of the lines which output X-value in the logic circuit to solve the most serious problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.19-21
• /
• 2005

The purpose of power system design is, in a word, to provide a good quality of electric power. The design of reliable industrial and commercial power distribution system is important because of the high costs associated with power outage. Three major factors for realization of the purpose are: (1) To hold system frequency at or very close to a specified nominal value(e.g. 60Hz) by control of frequency-effective power. (2) To maintain the correct value of interchange power between power and local generators. (3) To hold system voltage at or very close to a specified nominal value by control of voltage-reactive power. Within the past decade, numbers of industrial and commercial facilities installed with local generation, large motors or both, are increasing. This means that system stability is of concern to a growing number of industrial plant electrical engineers and consultants.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.222-227
• /
• 2016

In this paper, the optimized design for bow structure was investigated by using EDISON software. Considering the mechanism of the bow, non-linear FEM analysis was essential. The factors of the design are height, width, number of holes and taper value. High performance of the internal energy and lowest mass were main issues. The limit of the von-mises stress was yield strength for the material. Material was chosen by considering typical bow material, Aluminum. Using Taguchi method($L_9$), 9 models were selected and contribution rate was calculated for each factors. Following the contribution rate, 3 factors were fixed and optimized model was predicted. After making optimized model for FEM analysis, the value of internal-energy, mass for FEM model were compared with predicted value, calculated the percentage error and figure out the reliability of Taguchi method.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.233-238
• /
• 2012

In this study, we carried out a precedent investigation for an ultra-large container ship, which is expected to be a higher value-added vessel. We studied a preliminary optimized design technique for estimating the principal dimensions of an ultra-large container ship. Above all, we have developed optimized dimension estimation models to reduce the building costs and weight, using previous container ships in shipbuilding yards. We also applied a generalized estimation model to estimate the shipping service costs. A Genetic Algorithm, which utilized the RFR (required freight rate) of a container ship as a fitness value, was used in the optimization technique. We could handle uncertainties in the shipping service environment using a Monte-Carlo simulation. We used several processes to verify the estimated dimensions of an ultra-large container ship. We roughly determined the general arrangement of an ultra-large container ship up to 1500 TEU, the capacity check of loading containers, the weight estimation, and so on. Through these processes, we evaluated the possibility for the practical application of the preliminary design model.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.624-635
• /
• 2015

Design space exploration has been much neglected in aircraft conceptual design phase, which often leads to a waste of time and cost in design, manufacture and operation process. It is necessary to explore design space based on operational system-of-systems (SoS) simulation during the early phase for a competitive design. This paper proposes a methodology to analyze aircraft performance parameters in four steps: combination of parameters, object analysis, operational simulation, and key-parameters analysis. Meanwhile, the design space of an unmanned aerial vehicle applied in earthquake search and rescue SoS is explored based on this methodology. The results show that applying SoS simulation into design phase has important reference value for designers on aircraft conceptual design.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.73-77
• /
• 2013

Leisure activities alter overland tourism into marine tourism according to a rise in national income. It is expected that the leisure boat with period of introduction in marine tourism will be developed rapidly. It needs to unite with marine technology, optimized layout design, interior design and so on in order to build a yacht of high quality. Because optimized layout design and interior design technique increase the added value of the yacht, it needs to be convergence technology between Ergonomics, Sensibility Ergonomics, and design technique. In this study, we analyzed traffic line of crews in a sailing yacht and assessed working posture using OWAS, RULA and REBA tools. Also we suggested tips of Ergonomic design in the sailing yacht.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1528-1533
• /
• 2009

Infrastructure is provided to the user through long-term project period and large-scale working expenses. Existing facilities are getting old as time goes by. Accordingly, proper maintenance is required and generally more maintenance cost than initial invested cost is needed during life cycle. Therefore, a specific plan that just increases the value of facilities is required by evaluating performance of facilities and inputting minimum maintenance cost. Value engineering that increases the value of object by systemically analyzing Life Cycle Costs and function is actively promoted at the design phase of construction. These efforts can increase the performance of facilities at the maintenance phase of infrastructure. This study is to search how to evaluate the performance of Roadway by utilizing function analysis, as a core part of VE in the maintenance phase. In order to this a new evaluation criteria were proposed by adding an evaluation items to the existing criteria through the research of old documents, status of roadway maintenance and function analysis of VE. The results of this study may promote the effective performance evaluation to determine a resolution of roadway congestion in future. A succeeding study using the proposed evaluation criteria will be required.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1281-1292
• /
• 2020

More and more cloud computing services are being applied in various fields; however, it is difficult for users and cloud computing service platforms to establish trust among each other. The trust value cannot be measured accurately or effectively. To solve this problem, we design a service-oriented cloud trust assessment model using a cloud model. We also design a subjective preference weight allocation (SPWA) algorithm. A flexible weight model is advanced by combining SPWA with the entropy method. Aiming at the fuzziness and subjectivity of trust, the cloud model is used to measure the trust value of various cloud computing services. The SPWA algorithm is used to integrate each evaluation result to obtain the trust evaluation value of the entire cloud service provider.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.615-620
• /
• 1997

The flow rate and the noise level of 18 cross flow fans were measured to analyze the effect of design variables on these and to finally find the optimal design value. These data were analyzed by the Taguchi method and the neural network. The optimal values obtained by the neural network showed good agreements with that by the Taguchi method. The effects of eight design variables on the fan performance and the noise were evaluated and discussed.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.157-166
• /
• 2010

Furniture in the modern living environment, inclusive the importance of its practical value, is a plastic element of indoor space, and its artistic value also holds an important position. Moreover, emotional design based on the emotional engineering in a structural change of modern society such as urbanization, small family, aging society is proposed as an important keyword in the modern design. Namely, furniture as an component of modern residential space has been advanced as a human-oriented environmental element considering people's emotional and mental value to the functional satisfaction and artistic and emotional satisfaction. Furniture is a living tool that is much contacted to people, which affects highly on people's body and mind. This means that people's volition action can be naturally induced by furniture design, and that furniture can display a role as an active tool of means to make people's interpersonal communication and interchange. Namely, I think furniture design of emotional interchange that understands furniture user's pattern behavior and pattern, and observes furniture form and structure and functionality on users' relationship affecting on people's emotional stability and interpersonal interchange of emotion, as an indispensable element necessary for producing more human and prosperous environment of life.