• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.300-303
• /
• 2013

On BIPV systems, especially roof-top PV systems, the power generation is easier to be reduced due to the shades of facilities nearby, or roof itself. To secure profitability of roof-top PV systems, the optimal design of solar arrays through the precise shading analysis is an important item of design considerations. In this paper, an optimization system for array design of roof-top PVs is to be developed using three-dimensional Geospatial Information System(GIS). The profitability of income and expense is considered through the shading analysis of entire roofs. By applying the system to project for validation, the adequacy and the improvement of NPV of the system were verified compared to expert's design. The system has significance by reason that PV modules are placed through rules established with expert knowledge and geometric rules were applied to reflect the constructability and maintainability.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.78-84
• /
• 1997

The specific purpose of this study is to develop the numerical guide for the cost-benefit analysis of ORE ($/person-Sv reduction) to meet the criterion of ALARA in the design stage of the KNGR. In deriving the guide, the risk factor which is defined by the risk to unit collective radiation exposure dose (deaths/person-Sv) and the monetary value of human life ($/death) are required. The risk factor has been estimated from various clinical data accumulated for a number of years and continuously modified. And the monetary value of human life is usually quantified using the human capital approach. In this study, the risk to radiation exposure perceived by a group of people is investigated through an extensive poll survey conducted among university students in order to modify the existing risk factor for radiation exposure. And in evaluating the monetary value of human life, the QOL factor is introduced in order to incorporate the degree of public welfare or quality of life. As a result of study, a value within the range of 151, 000~172, 000 dollars per person-Sv reduction is recommended as the appropriate interim numerical guide for cost-benefit analysis of ORE to meet the criterion of ALARA in the design stage of the KNGR. A poll survey was also conducted in order to see whether the public acceptance cost of nuclear power should be incorporated in developing the guide, and the result of study shooed that such a cost does not need to be considered.

• 상하수도학회지
• /
• 제36권4호
• /
• pp.229-237
• /
• 2022

The sewer capacity design have been based on the Huff model or the rational equation in South Korea and often failed to determine optimal capacity, resulting in frequent urban flooding or over-sizing. A time distribution of rainfall (i.e., Huff or ABM method) could be used instead of a rainfall hyetograph obtained from statistical analysis of previous rainfalls. In this study, the Huff method and the ABM method, which predict the time distribution of rain intensity, which are widely used to calculate sewage pipe drainage capacity using the SWMM, were compared with the standard rainfall intensity hyetograph of Seoul. If the rainfall duration was 30 minutes to 180 minutes, the rainfall intensity value calculated by the Huff model tended to be less than the rainfall intensity value of the standard rainfall intensity in the initial 5-10 minutes. As a result, more than 10% to 30% of under-design would be made. In addition, the rainfall intensity value calculated by the Huff model from the section excluding the initial 5-10 minutes of rainfall to the rainfall duration was calculated larger than the value using the standard rainfall intensity equation, which would result in an over-design of 10% to 30%. In the case of a relatively long rainfall duration of 360 minutes (6 hours) to 1,440 minutes (24 hours), it showed an lower rainfall intensity of 60 to 90% in the early stages of rainfall, but the problem of under-design had been solved as the rainfall duration time had elapsed. On the other hand, in the alternating block method (ABM) method, it was found that the rainfall intensity at the entire period at each assumed rainfall duration accurately matched the standard rainfall intensity hyetograph of Seoul.

• 한국전산구조공학회논문집
• /
• 제28권1호
• /
• pp.63-69
• /
• 2015

본 연구에서는 페이즈 필드법을 기반으로 하는 위상 최적설계 방법을 통하여 적외선 스텔스 효과를 위한 적외선 반사층의 설계를 진행하였다. 이를 위하여 수직으로 입사하는 적외선 파를 반사층에서 반사되어 원하는 방향으로 전파되도록 모델링을 하였다. 전파 방향에 측정 영역을 설정하여 해당 영역에서의 목적함수 값을 최대화하도록 설계가 진행되었으며, 이때 목적함수는 전자기파의 에너지 흐름을 나타내는 포인팅 벡터(Poynting vector)로 설정하였다. 페이즈 필드법 기반의 방법에서의 여러 파라미터 값들을 변경해 가며 설계 결과를 도출하였고, 목적함수 값을 최대화하는 모델을 최적 모델로 선정하였다. 선정된 최적 모델에서 gray scale을 cut-off 방법으로 제거한 경우 더 좋은 결과를 얻을 수 있었다. 또한 중적외선 영역에서의 효과를 고려하기 위하여 입사되는 파장을 바꿔가며 얻은 해석결과를 검토하였다. 본 연구의 유한요소해석 및 최적화 과정은 상용 프로그램인 COMSOL과 Matlab을 연동하여 수행하였다.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.25-31
• /
• 2017

This paper aims to evaluate the conservatism in the design of APR1400 (Advanced Pressurized water Reactor 1400 designed by KHNP) reactor internals component, the LSS (Lower Support Structure). Re-engineering of the LSS is done based on the system design condition data and applicable ASME code that was used for the original APR1400 design. Systems engineering approach is applied to design the LSS of APR1400 without refering APR1400 LSS dimensional parameters and tries to verify important design parameters of APR1400 LSS as well as the validity of the re-engineering design process as independent verification method of reactor component design. Systems engineering approach applied in this study following V-model approach. The re-engineered LSS design showed more than enough conservatism for static loading case. The maximum deflection of LSS is under 1mm (calculated value is 0.25mm) from 4000 mm diameter of LSS. Hence the deflection can be ignored in other reactor internals for structural integrity assessment. Especially the effect of LSS deflection on fuel assembly can be minimized and which is one of the main requirements of LSS design. It also showed that the maximum stress intensity is 2.36MPa for the allowable stress intensity of 60.1 MPa. The stress resulted from the static load is also very small compared to the maximum allowable stress intensity, hence there is more than enough conservatism in the LSS design.

• 대한기계학회논문집A
• /
• 제40권5호
• /
• pp.497-503
• /
• 2016

머플러의 확장방 내부에 격벽을 최적으로 배치하기 위한 음향 위상 최적화 문제를 정식화 한다. 목표 주파수에서 삽입 손실의 하한 값을 제한하며, 격벽의 부피를 목적 함수로 선정하여 최소화한다. 기존 연구에서는 투과 손실이나 덕트 내부에서 계산된 삽입 손실을 머플러의 소음 저감 특성으로 사용하였으나, 본 연구에서는 덕트 외부에서 계산된 삽입 손실을 사용한다. 음향 해석을 위해 유한 요소 모델이 사용되고, 각 유한 요소에 입사된 음파의 투과 정도는 "0"과 "1" 사이에서 연속적으로 변화하는 설계변수의 함수에 의해 결정된다. 입사파를 모두 반사시키는 강체들이 격벽을 형성한다. 목적 주파수와 허용하는 삽입손실 값에 따른 최적 위상을 비교한다.

• 공학교육연구
• /
• 제15권5호
• /
• pp.25-30
• /
• 2012

"The engineering education program for environmental intention and value creation" has been executed from 2008 to 2010 in Suzuka National College of Technology, which program was promoted as "Good Practice for Education" by Ministry of Education, Culture, Sports, Science and Technology Japan. "Eco-car project" is one of these practical ecology/environment education programs. The project's members have been learning and researching the environmental managements by the process of design, manufacturing, and assembly of solar car, highly effective fuel consumption car (Eco-run car), electric vehicle and fuel-cell car. Also this project was supported by some professional experts of the local industries and community. The students learned the actual industrial technique, the engineering management and the structure of local industries by this project. In this paper, the environmental intention engineering design education with local industry collaboration is introduced.

• 한국건설관리학회논문집
• /
• 제6권6호
• /
• pp.133-141
• /
• 2005

최근에 공동주택 건설사업을 위한 가치공학 및 생애주기비용(LCC)분석의 중요성이 대두됨에 따라, 대형 건축물의 건설사업에서 가치공학 및 생애주기분석을 위한 이론적 모델, 표준지침 및 소프트웨어 등이 개발되어지고 있다. 그러나 현재까지도 실질적인 과거 보수이력데이터의 부재로 인한 VE 및 LCC분석 결과에 대한 신뢰수준이 미흡하다. 본 연구에서는 공동주택의 건설사업에 대한 합리적인 투자의사결정과 설계대안선정을 위한 시간의존적 LCC분석에 의한 가치분석 방법론을 제시하였다. 제안된 방법론은 과거이력데이터의 불확실성과 분석대안의 가치분석을 보다 합리적으로 고려하기 위한 시간의존적 생애주기비용 모델과 퍼지로직에 의한 성능평가기법과의 상관관계를 규명하였다. 또한, 제시된 시간의존적 생애주기비용 모델과 가치분석 절차의 타당성을 검토하기 위하여 실제대상사업에 적용하였다. 본 연구에서 제안된 방법론은 공동주택 건설사업에서의 설계대안 선정, 생애주기 비용 평가 및 합리적인 예산의 분배 등에 크게 기여할 것으로 기대된다.

• 공학교육연구
• /
• 제15권1호
• /
• pp.79-83
• /
• 2012

I argue that STS education for engineers, despite its prima facie usefulness in demystifying the conventional image of science and technology, should deal with a few challenges in order to cultivate 'responsible' engineers. The challenges come from the fact that there are more than one legitimate way of understanding 'responsible' in the engineering contexts depending on how wide the range of responsibility is intended and on how the relevant reference class is defined. In order to tackle these issues, I suggest that we should take into account more seriously the 'value-laden' nature of the engineering design.

• Wind and Structures
• /
• 제31권3호
• /
• pp.197-207
• /
• 2020

Knowledge on the design value of extreme wind pressure coefficients (EWPC) of a specific zone of buildings is essential for the wind-resistant capacity of claddings. This paper presents a method to estimate the representative EWPC introducing the multivariate extreme value model. The spatial correlations of the extreme wind pressures at different locations can be consider through the multivariate extreme value. The moving average method is also adopted in this method, so that the measured point pressure can be converted to wind pressure of an area. The proposed method is applied to wind tunnel test results of a large flat roof building. Comparison with existing methods shows that it can give a good estimation for all target zones with different sizes.