• Journal of the Korean housing association
• /
• v.14 no.1
• /
• pp.61-66
• /
• 2003

Considering the present outdoor environment of city landscapes, the improvement of well-formed street landscapes is a very important issue in Korea. At this point of time, it is very meaningful to understand the sign design and the planning condition of buildings and examine various problems about this and the possibilities for improvement. Thus the purpose of this study is to accumulate basic data to establish design guideline and visual factors for the sign design for useful environment. The conclusions of this study are as follows: to understand the factors of sign designs is through survey and analysis of building condition and city landscape. Planning factors for outdoor advertising design should be developed systematically and more fit to the street environment and designers in the aspect of control and guidance.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.581-589
• /
• 2009

Under 'The Design Street' Project, one of the urban environment improvement projects of Seoul, the facilities on the street have been greatly varied in terms of design. In addition, the municipal authority has pushed each district to develop its own identity based on the integrated design of the city. This study was aimed to propose a design which could solve the current problem in street furniture in terms of environmental improvement through an analysis on current street conditions in "Y" District as a part of Seoul Design Street Project. It has attempted to propose 11 street furnitures based on the basic strategy of 'Soft City' which has been promoted by Seoul City in accordance with the Seoul Public Facility Guidelines as 1. Airy Design, 2. Integrated Design, 3. Collaborative Design and 4. Sustainable Design. Among them, for the total design in Seoul six facilities - kiosk, manhole, traffic signal controller, public phone, road sign and waste receptacle were proposed by Seoul City have been accepted. For local differentiation, on the contrary, five items - planter bench, bollard, lifter, bike rack and fence have been newly designed and proposed. Furthermore, it is essential to carry out systematic supervision and continuous management on the detail design and construction of current regional design development projects.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.172-179
• /
• 2014

This research suggests that the regulation, design and improvement of domestic and international ambulances so that make the basis for the future ambulance in Korea. It is true that the diversification of current disasters, increasing elderly population, the increase in emergency patients, due to the lack of effective transfer system, emergency vehicle's performance problem, and the aging of ambulances cause have difficulty in providing effective emergency services in domestic country. Therefore, in order to improve the effectiveness of ambulance, the history of ambulance, other relevant provisions include international, design and directions to be improved were investigated, and also research directions of the ambulance are suggested in domestic country. In this research, suggests the following conclusions to improve domestic ambulance 1. Through standardization of the spacing and location of an ambulance is needed to maximize the treatment room. 2. The interior of the ambulance design for hygiene and infection control should be included. 3. Stretcher and equipment are designed to be fitted to each other should be standardized. 4. Especially during transfer maintain the road, noise, vibration, and shock-absorbing function to emphasize the importance. 5. The improvement of ergonomic design is necessary for the possibility of applying to many people.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.45-55
• /
• 2018

PURPOSES : This study aims to survey and analyze the status of the design and completion documents output delivery system in public construction projects in order to assess the problems of the Ministry of Land, Infrastructure and Transport (MOLIT)'s electronic delivery system, with a focus on roads and rivers, and to offer improvement measures. METHODS : This study first surveys and analyzes laws and existing study trends with regard to the design and completion documents output delivery system in public construction projects. It further analyzes the status of the output delivery system in public construction projects, including roads, rivers, expressways, water resources, and railroads. In addition, a comparative analysis of the current electronic delivery system of MOLIT and Korea Expressway Corporation in the road field is conducted, and the problems and improvement measures for MOLIT's electronic output delivery system are presented. This study seeks to analyze problems and prepare improvement measures with regard to road and river public construction projects, as ordered by MOLIT's five regional offices. RESULTS : This study sought to prepare the electronic output delivery system with regard to public construction projects and present the analysis of its major problems and improvement measures in four categories: "the preparation of electronic design documents output delivery system improvement measures including inspection and delivery," "preparation of guidelines, systems, etc., concerning electronic design documents," "preparation of improvement measures for the construction project management system and electronic design document support tools", and "linking of MOLIT's electronic output delivery system with relevant agencies and the expansion thereof to local governments." CONCLUSIONS : This study analyzed the current status and problems of the MOLIT's electronic output delivery system in the field of road and river construction projects, and presented corresponding improvement measures. This study is expected to address the problems of the MOLIT's electronic output delivery system, and to provide the foundation for the preparation of an efficient electronic output delivery system for design and completion documents. In addition, this study is expected to boost the quality and utilization of the electronic design documents output, and to exchange, share, and link construction information among relevant agencies so as to prepare the foundation for sharing construction information.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.51-56
• /
• 2016

High brittleness is a characteristic of glass, and in many cases it is broken during the process of machining due to processing problems, such as scratches, chipping, and notches. Machining defects occur due to the vibration of the equipment. Therefore, design techniques are needed that can control the vibration generated in the equipment to increase the strength of tempered glass. The natural frequency of the machine tool via vibration analysis (computer simulation) must be accurately understood to improve the design to ensure the stability of the machine. To accurately understand the natural frequency, 3D modeling, which is the same as actual apparatus, was used and a constraint condition was also applied that was the same as that of the actual apparatus. The maximum speeds of ultrasonic and high frequency, which are 15,000 rpm and 60,000 rpm, respectively, are considerably faster than those of typical machine tools. Therefore, an improved design is needed so that the natural frequency is formed at a lower region and the natural frequency does not increase through general design reinforcement. By restructuring the top frame of the glass processing, the natural frequency was not formed in the operating speed area with the improved design. The lower-order natural frequency is dominant for the effects that the natural frequency has on the vibration. Therefore, the design improvement in which the lower-order natural frequency is not formed in the operating speed area is an optimum design improvement. It is possible to effectively control the vibrations by avoiding resonance with simple design improvements.

• International Journal of Contents
• /
• v.13 no.2
• /
• pp.50-56
• /
• 2017

The number of accidents in school zone is decreasing than before with the introduction of strengthening traffic safety policy since January 2011, but the danger still exists. The School zone sign is widely known to have much effect in protecting children from risks of traffic accidents, but design improvement is being demanded to improve a sense of safety and legibility of safety signs in School zone due to the lack of understanding on the safety signs in crosswalk and School zone. This study analyzed differences in shape and color of existing safety signs through a case analysis of traffic developed countries as America, England, Japan, and Germany and suggested improvement plans for drivers to clearly perceive the school zone. For improvement methods, this study suggested the importance of delivering definite and unified warning message for school zone to drivers by using indication sign and caution sign together, and to use yellow, a safety color, and to unify the safety sign into triangle shape that symbolizes warning and caution to conform the international standards. Actual design production and experiment through improvement plans are needed in the future, and it is expected to secure safety of children and to provide international standardization of safety signs in school zone.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2006

This research recognizes the importance of hotel and regular traditional restaurants contributing to tourism industry that goes along with demands of an era that considers traditional culture important, and focuses on searching for possibility by proposing direction of designs that traditional restaurant uniforms should aim. To achieve this study goal, by surveying the problems & preferences of the current uniform, over 60% of both the attendants & customers expected an improvement in the uniform. Most of the subjects wanted the improvement in design, followed by the improvement in functionality. Over 80% preferred traditional design or modernized design where traditional aspects were applied. Also, over 70% preferred a design where a pattern was applied. Among the patterns, over 80% of the subjects said that they prefer traditional patterns or modernized patterns where traditional aspects are applied. We admit that there are some limitations on this study, such as insufficient analysis & study on the attendants' action and their uniform, as well as limitations on restaurant selection. However, Through the study we expect that the Korea uniform can be differentiated from others, achieving World-class competitiveness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.304-304
• /
• 2009

We may need to consider 'display' interface and product design as distinct from traditional user- and technologydriven product design. Technology-dominated product development may lead users to demand another 'technological improvement' rather than 'design improvement.' This cycle of product development may cause both users and producers to disregard the potential of 'display' technology and interface. We must develop a better understanding of significant and unique 'display' potential in comparison with 'real' world communications and current sociological and technological contexts.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.159-166
• /
• 2012

As enterprises, based on the forecast of the customer's demand and collaboration with the suppliers, establish the integrated system directing supply, production, and distribution for the increase of productivity, Thus, this study intends to find the most urgent and critical factors for the improvement of the information system by externalizing factors affecting the operation of information system, suggest the process to improve the relevant functions of information system, and design the process. As a result of the analysis of the previous studies on the improvement of the information system, many studies were conducted on the improvement of ERP and SCM, yet there was no study conducted targeting about APS (Advanced Planning & Scheduling). Thus, this study chose APS as the subject for the design of the process for the improvement for the information system.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2016

Purpose: The gear strength of a new mechanical transmission designed to increase the loading weight of small 4.8 kW tracked agricultural transporters was analyzed. Design improvements to increase the gear strength and reduce the gear weight were proposed after examining the parameters. Methods: Sixteen operators from three regions were surveyed to obtain the usage profile of small 4.8 kW transporters. Gear strength was evaluated by calculating contact stress and tooth root stress using commercial software following ISO 6336. Results: From the strength calculation for each gear pair, contact stress smaller than tooth root stresses were produced in all gear pairs. The safety factors in most cases exceeded 1.0, except in the case of gear pair II in group II. The design life of the transporter using gear pair II in group II was 42% under harsh conditions-thus, this design life needs improvement. A robust design was proposed by examining the relevant parameters (face width and profile shift coefficient) to increase the design life of the transporter. In addition, a lightweight design for gear pair I in group II that was considered overdesigned was proposed by examining the face width to reduce the weight of the drive gear by 42% and that of the driven gear by 30%. Conclusions: The Safety factor for the design life was examined through a gear strength analysis. After examining the relevant parameters, conditions for strength improvement were proposed to increase design life or adjust overdesigned gear. However, load conditions differ depending on the working conditions or user's preferences; therefore, it is necessary to conduct further studies in various regions.