• 제목/요약/키워드: Design factors

검색결과 13,299건 처리시간 0.044초

경관훼손지의 생태적 복구방안에 관한 연구 (A Study on the Ecological Restoration Strategies for the Disturbed Landscapes)

  • 김남춘
    • 한국환경복원기술학회지
    • /
    • 제1권1호
    • /
    • pp.28-44
    • /
    • 1998
  • This study was conducted to suggest the ecological restoration strategies for the disturbed landscapes by theoretical study. Especially, it is aimed to suggest three objectives for restoration by using native plants ; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Cooperation between restoration ecologists and restoration practitioners is needed to delineate a scientific approach to restoration ; (1) Being aware of published literature that describes similar work and/or establish general principles. (2) Preparedness to carry out proper experiments to test ideas. (3) Preparedness to monitor fundamental parameters in a restoration scheme. (4) Providing information about the behavior of species. (5) Publish results. 2. There are three models of succession in theories of plant succession. The tolerance and facilitation models were recommended to ecological restoration. The inhibition model applies in most secondary succession, but the actual species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. 3. The objectives of erosion control, wildlife habitat provision, and visual quality improvement are not mutually exclusive. However, many revegetation practices in the past have emphasized one of these aspects at the expense of the others. 4. A native plant community can be the model of ecological restoration. By stylization/abstraction of native plant community, trying to learn the most essential characteristics of community types - environmental factors ; dominant, prevalent, and "visual essence" species composition - in order to use such information in restoration. 5. After developing mass/spaces plan, match plant communities to the mass/space plan. In utilizing community grouping, there needs aesthetic ability to understand design elements. 6. Several hydrophytes such as Pennisetum saccharifluous, Themeda triandra, Cirsium pendulum show relatively good germination rates. In case of mesophytes and xerophytes, Arundinella hina, Artemisia princeps, Oenothera odorata and legumes seem to have quick-germinating abilities at barren sites. Pinus thunbergii, Rhus chinensis, Evodia daniellii, Alnus firma and Albizzia julibrissin can be considered as "late succession" woody plants because they show low germinating rates and slow growing habitat. 7. The seeds used for restoration should be collected within a certain radius of where it will be planted. Consideration in genetic issues in the collection and use of germplasm can increase the odds for successful restoration efforts. 8. The useful model in the "drift" pattern occurs so abundantly in naturally evolving landscapes. As one species diminishes in density, a second or third species are increased. Thus, dynamic interactions between species are created. Careful using of "drift phenomenon" in planting was recommended. 9. Virtually no stand of vegetation today is immune from the introduction and/or spreading of exotic species. Therefore, the perpetuation of a restored sites requires conscious monitoring and management. Thus, management would be the most important process in ecological restoration. 10. In order to keep the sites "natural", alternative management strategies would be applied in management ; Atenative management strategies are decelerating successional process, accelerating successional processes or modifying species composition. As management tools, mechanical, chemical, biological or environmental factor manipulation, e.g., fire could be used.

  • PDF

상품 범주별 온라인 구매도 -인터넷 동기와 온라인 구매성향 기능- (Online Purchase Intentions for Product Categories -The Functions of Internet Motivations and Online Buying Tendencies-)

  • 김은영
    • 한국의류학회지
    • /
    • 제32권6호
    • /
    • pp.890-901
    • /
    • 2008
  • 본 연구는 소비자의 인터넷 사용동기, 온라인 구매성향과 제품구매의도 사이의 관계를 밝힘으로써 온라인 상품 범주화의 기초 개념을 밝히고자 하였다. 조사대상은 미국 남서부 지역에 거주하는 대학생 총 217명으로 구성되었으며, 자료분석을 위해 요인분석과 경로모델을 추정하였다. 분석결과, 소비자의 인터넷 동기는 기분전환, 경제적, 정보적, 사회적 동기의 4개 요인으로 분류되었다. 또한 온라인 제품은 구매의도에 따라 감각상품, 인지상품과 탐색상품의 3개 범주로 분류되었다. 경로모델의 추정결과, 인터넷 사용의 기분전환과 경제적 동기요인이 충동구매성향에 영향을 주는 반면, 경제적, 정보적, 사회적 동기요인은 계획구매성향에 영향을 주는 것으로 나타났다. 온라인 구매의도에 있어서, 감각상품은 충동구매성향과 더 높은 관계를 나타낸 반면, 인지상품과 탐색상품은 계획구매성향과 더 높은 관계를 나타냈다. 또한, 인지상품은 경제적 동기에 근거한 계획구매성향에 의해 더 강한 효과를 보였으며, 탐색상품은 정보적 동기에 의한 계획구매성향에 의해 더 강한 효과를 나타났다. 따라서 본 연구는 특정 상품 범주에 따른 이론적 정립과적절한I-마케팅 전략의 관리적 측면이 논의되었다.

인공광을 이용한 접목표 활착촉진 시스템의 시작품 설계 - 활착촉진 시스템 내의 기온과 상대습도 분포에 미치는 기류속도의 효과 (Design of a Prototype System for Graft-Taking Enhancement of Grafted Seedlings Using Artificial Lighting - Effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system)

  • 김용현
    • Journal of Biosystems Engineering
    • /
    • 제25권3호
    • /
    • pp.213-220
    • /
    • 2000
  • Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.

  • PDF

Design and Safety Performance Evaluation of the Riding Three-Wheeled Two-Row Soybean Reaper

  • Jun, Hyeon-Jong;Choi, Il-Su;Kang, Tae-Gyoung;Kim, Young-Keun;Lee, Sang-Hee;Kim, Sung-Woo;Choi, Yong;Choi, Duck-Kyu;Lee, Choung-Keun
    • Journal of Biosystems Engineering
    • /
    • 제41권4호
    • /
    • pp.288-293
    • /
    • 2016
  • Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

트랜스코더의 해상도 변환 모듈과 움직임 추정 모듈의 공동 최적화 (Joint Optimization of the Motion Estimation Module and the Up/Down Scaler in Transcoders television)

  • 한종기;곽상민;전동산;김재곤
    • 방송공학회논문지
    • /
    • 제10권3호
    • /
    • pp.270-285
    • /
    • 2005
  • 해상도 변환모듈과 움직임 예측모듈은 트랜스코더를 이루는 중요한 모듈이다. 본 논문에서는 트랜스코더 시스템의 이 두 가지 모듈을 공동 최적화하는 기법을 제안한다. 제안하는 기법은 먼저 주어진 움직임 벡터에 대해 해상도 변환모듈을 최적화한 후, 최적화된 해상도 변환모듈에 대해 최적의 움직임 벡터를 결정한다. 기존 해상도 변환 기법들은 한 영상에 대해 변환함수를 최적화하여 사용한다. 본 논문에서는 해상도 변환 최적화를 위하여 적응적 3차 회선 변환기를 제안한다 제안된 방법은 3차 회선 변환기의 인자값을 각 매크로블록 단위로 영상의 지역적 특성을 고려하여 적응적으로 조절한다. 움직임 예측모듈에서는 기존의 고속 트랜스코더 알고리듬에서 많이 연구된 움직임 벡터의 재사용 기법을 사용하였다. 입력 영상의 움직임 벡터를 재사용 함으로써 연산량을 줄일 수 있고 이를 기본 움직임 벡터로 사용해 작은 영역에서 재탐색해 움직임벡터를 결정할 경우 전역탐색기법과 거의 동일한 화질의 영상을 얻을 수 있다. 해상도 변환모듈과 움직임 예측모듈의 공동 최적화를 통해서 트랜스코딩된 영상의 화질 열화를 최소화할 수 있는 알고리듬을 제안한다. 실험 결과 본 논문에서 제안하는 공동 최적화 기법이 기존에 연구 되었던 다른 기법에 비해 화질의 열화가 적은 것을 알 수 있었고, 이를 통해 다른 기법과 비교해 해상도 변환으로 인한 정보의 손실이 가장 적음을 알 수 있다.

적응적 필터링에 의한 투사영상 복원에 관한 연구 (A Study on Projection Image Restoration by Adaptive Filtering)

  • 김정희;김광익
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권2호
    • /
    • pp.119-128
    • /
    • 1998
  • SPECT 장치는 감마 카메라로 촬영된 일련의 투사영상을 재조합, 재구성하여 횡단면 단층상을 생성하는데, 이때 투사 영상을 획득하는 과정에서 여러 물리적 요소들이 개입되어 투사 영상의 왜곡을 가져온다. 이들 변질 요인들 가운데서도 광자수 제한에 따른 노이즈 변질이 가장 심각한 요인이기 때문에, 투사 영상에 대한 필터링은 노이즈 평활화(smoothing)가 가장 기본적인 방법이다. 그러나 단순한 저역통과 필터링(low-pass filtering)이 투사영상의 윤곽선이나 기타영상구조들을 번지게 함으로써 재구성 영상의 질을 떨어 뜨린다는 사실은 이미 알려져 있다. 주요 영상 구조들을 효과적으로 유지하면서도 노이즈를 억제시키기 위한 한 접근으로 적응적 필터링 기법이 많은 연구자들의 관심을 모으고 있다. 본 논문에서는, 재구성 영상에서의 '최소 검출가능 이상조직의 검출 신뢰도 향상'이라는 관점에서 최적 필터를 설계하였던 이전 연구와 관련하여, 주어진 물리적 조건하에서의 SPECT 이상조직 검출능에 근거된 투사 영상 복원을 위한 적응적 필터링 기법을 제안한다. 결과적으로, 제안된 필터링 알고리즘은 SPECT 영상 재구성시 우수한 이상조직 검출능을 보였으며, 특히 다양한 대조도의 이상조직들을 포함하고 있는 모형 실험에서 보여준 본 필터링 알고리즘의 이상조직 검출능 결과는 실제 SPECT데이터 적응시 좋은 결과를 기대할 수 있게 하였다.

  • PDF

뉴실버세대의 모바일 헬스케어 사용성을 높이기 위한 GUI 가이드라인 제안 (Proposal of GUI Guidelines to Improve the Usability of Mobile Healthcare for New Silver Generation)

  • 조성배;이재익
    • 스마트미디어저널
    • /
    • 제7권2호
    • /
    • pp.60-70
    • /
    • 2018
  • 최근 고령 사회로의 진입으로 헬스케어 서비스의 수요가 확대되고 있다. 하지만 노후를 능동적으로 준비하는 뉴실버세대의 특성을 고려한 GUI연구는 아직 미비한 실정이다. 뉴실버세대는 일반적인 고령자들보다는 정보취득에 대한 거부감이 약하기는 하지만 40대 이하의 젊은 세대들과 정보습득능력의 차이를 보이고 있기 때문에 그들의 신체적, 심리적, 사회적 특성을 고려한 모바일 헬스케어 서비스의 GUI에 대한 연구가 시급하다. 따라서 본 연구의 목적은 미래 의료소비의 중심으로 떠오르고 있는 뉴실버세대가 모바일 헬스케어 서비스를 쉽게 사용할 수 있도록 하기 위한 GUI평가 가이드를 제안하는 데에 있다. 연구방법은 첫 번째, 문헌연구과 선행연구를 통해 뉴실버세대의 특성을 분석하여 모바일 헬스케어의현황을 파악하였고, 두 번째, 현재 모바일 헬스케어 어플리케이션의 각 분야에서 선호되는 시각구성요소를 분석하여 고령자의 특성에 맞게 모바일 GUI디자인의 사용성 평가 지표를 도출하였다. 세 번째, 도출된 평가 지표를 사용하여 휴리스틱(heuristic)방식을 통하여 57세부터 65세까지의 뉴실버세대 8명을 대상으로 사용성 평가를 진행하였다. 이 연구는 뉴실버세대 사용자의 특성에 맞춰 GUI가이드를 제안함으로써 사용성 향상에 기여하기를 기대하며 동시에 헬스케어 모바일 어플리케이션 개발에 대한 연구가 지속되어야 할 것으로 생각된다.

모바일 환경에서의 텍스트 표현 방식의 상호작용성과 사용모드가 사용자의 만족도, 유용성, 사용의도에 미치는 영향 (Effects of interactivity and usage mode on user satisfaction, usefulness, and intetion to use in text information presentation in mobile environment)

  • 백현지;이상원
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 추계학술대회
    • /
    • pp.223-226
    • /
    • 2017
  • 최근 사용자들은 정보 기술의 발전으로 다양한 상황 속에서 모바일을 통해 원하는 정보를 제공받고 있다. 사용자가 정보와 커뮤니케이션 할 때, 탭핑과 같은 제스처 활동과 그 과정 속에서 겪는 경험을 통해 인터랙션이 이루어진다. 이러한 인터랙션을 통한 활동과 경험은 사용자의 심리에 영향을 미치고, 이는 추후 사용자의 행동과 관련이 있기 때문에 중요하다. 따라서 모바일 내 정보 표현 방식에서도 상호작용성을 고려하여 설계해야한다. 이와 관련한 연구들이 진행되어 왔으나 특히 텍스트 정보 표현 방식과 관련해서는 주로 기능적 측면만을 살펴 본 연구가 많고, 사용자가 처한 상황을 고려하여 평가한 연구는 부족하다. 본 연구에서는 정보 전달 시 사용자 중심의 완성도 높은 정보 표현 방식을 위해 상호작용성과 사용모드가 사용자의 정보습득에 대한 만족도, 유용성, 사용의도에 미치는 영향을 알아보고자 한다. 상호작용성은 Modality와 Message 상호작용성의 여부에 따라 High와 Low로 두 가지 방식으로 구성하고, 사용모드는 과업의 여부에 따라 Action 모드와 Goal 모드로 나누어 구성하였다. 실험 디자인은 총 $2{\times}2$로, 4개의 실험조건으로 구성되어 있다. 모바일 환경 내에서 인터랙션 차이에 따라 동일한 메시지 내용의 텍스트 정보가 (a) 오직 Modality 인터랙션으로만 제공되고, (b) Modality 인터랙션과 Message 인터랙션이 함께 제공된다. 또한 사용 모드에 따라 (a) Action 모드는 문맥에 관한 구체적인 지시사항 없이 실험이 진행되고, (b) Goal 모드는 참가자에게 특정 과업에 대한 지시가 제시된 채로 실험이 진행된다. 연구 결과, 모바일 내 정보제공 시 인터랙션과 사용모드의 차이에 따라 만족도, 유용성, 사용의도에 영향을 미치는 것으로 밝혀졌다.

  • PDF

유비쿼터스 센서 네트워크를 위한 효율적인 시간 동기화 프로토콜 연구 (A Study on Time Synchronization Protocol to Cover Efficient Power Management in Ubiquitous Sensor Network)

  • 신문선;정경자;이명진
    • 한국산학기술학회논문지
    • /
    • 제11권3호
    • /
    • pp.896-905
    • /
    • 2010
  • 유비쿼터스 센서 네트워크 환경은 다양한 이기종의 센서와 센서들 상호간의 통신을 통해 데이터를 수집하고 제공하여 물리공간의 지능화된 환경을 제공한다. 이러한 상태감지를 위한 센서노드들은 싱크노드와 센서노드로 구성되는데 이기종 센서 노드들간의 시간동기화를 고려하지 않고 전체 센서네트워크의 시간 동기화가 불가능 하게 된다는 문제점이 발생한다. 이러한 이기종 센서노드들간의 시간동기화 문제를 해결하기 위해서 본 논문에서는 싱크노드 아래의 센서노드들 중 싱크노드와 클럭소스가 같은 센서노드를 시간동기 마스터로 설정하고, 싱크노드와 다른 클럭소스를 가지는 센서노드를 마스터 아래에 속하는 시간동기 슬레이브로 설정하여 시간동기 마스터가 동작을 개시 할 때에만 시간동기 슬레이브 노드들이 동작하도록 하는 마스터 슬레이브 시간동기화 기법을 제안한다. 제안하는 마스터-슬레이브 토폴로지 기반 시간 동기화 기법은 센서의 설치가 용이하지 않은 USN환경에서 최대 슬립타임을 유지함으로써 센서의 전력소모를 최소화 할 수 있다.

Discoloration of various CAD/CAM blocks after immersion in coffee

  • Lauvahutanon, Sasipin;Shiozawa, Maho;Takahashi, Hidekazu;Iwasaki, Naohiko;Oki, Meiko;Finger, Werner J.;Arksornnukit, Mansuang
    • Restorative Dentistry and Endodontics
    • /
    • 제42권1호
    • /
    • pp.9-18
    • /
    • 2017
  • Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.