• 한국가스학회지
• /
• 제8권4호
• /
• pp.30-35
• /
• 2004

본 논문은 다구찌 실험 설계법을 이용하여 압력용기의 메탈시일 구조물에 대한 해석을 수행하였다. 다구찌 설계방법은 압력용기의 밀봉을 위한 캔티레버 타입 밀봉장치 구조물에 대한 설계 파라메터를 최적화 하는데 대단히 유용하다. 다구찌 기법으로 수행된 해석결과에 따르면, 최적화 설계 치수는 단지 16번의 반복 실험법에 의해 파라메터 치수를 최적의 조건으로 얻을 수 있다는 측면에서 간편한 설계도구이다. 이것은 다구찌 설계 실험법이 곡선면을 갖는 구조물의 최적화 설계에서 대단히 유용하다는 것을 의미한다. 다구찌 설계기법에 기초한 해석결과를 보면, 메탈시일 구조물의 에지부에 대한 최적화 치수와 경사각도는 $d_1=50mm,\;d_2=60mm,\;a_1=20^{\circ},\;a_2=8^{\circ},\;a_3=5^{\circ}$으로 각각 요약될 수 있다.

• 한국전산구조공학회논문집
• /
• 제26권3호
• /
• pp.207-212
• /
• 2013

APR1000(Advanced Power Reactor 1000)은 기존의 OPR1000(Optimized Power Reactor 1000)에 60년 설계수명, 국부주파수제어운전, 0.3g 안전정지지진하중 적용 등의 향상된 설계특성(Advanced Design Feature)을 적용하여 개선한 수출형 1000MW 원전이다. 이 논문에서는 Reg. Guide 1.207에서 요구하는 원자로냉각재 환경을 고려한 피로 평가를 원자로용기에 대하여 평가하였다. 원자로용기에서 비교적 누적사용계수가 높은 출구노즐을 대상으로 평가를 수행하였으며 출구노즐은 구조적 건전성을 만족하는 것으로 평가되었다.

• Composites Research
• /
• 제23권3호
• /
• pp.37-42
• /
• 2010

섬유 방향 강성과 강도는 복합재 압력 용기의 성능과 밀접한 관계를 갖기 때문에, 압력 용기 구조 설계시에 다른 물성들보다 중요 설계 인자가 된다. 즉 복합재 압력 용기의 내압 변형 및 파열 압력은 섬유 물성에 의해 큰 영향을 받는다. 그러므로 정확한 섬유 방향 물성을 측정할 수 있는 기법을 확립하는 것이 복합재 압력 용기 설계 전에 우선되어야 한다. 그러나 복합재 압력용기의 섬유 방향 물성은 제작 공정 변수(와인딩 장비, 작업자, 작업환경 등)와 크기 효과에 의해 큰 영향을 받으므로 기존의 시편 시험 방법으로는 정확한 섬유 방향 물성 측정이 어렵다. 섬유 물성을 측정하는 가장 이상적인 시험 방법은 실물 압력용기 파괴시험이지만 많은 비용이 소요되어, 제품으로부터 다량의 링 시편을 채취, 내압 시험을 할 수 있는 Hoop ring 시험 방법이 제시되었다. Hoop ring 시험과 실물 압력용기의 수압 파괴 시험으로부터 구한 섬유 방향 물성들은 근접된 좋은 일치를 나타내었다.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.23-30
• /
• 2002

Abstract The optimization is performed to reduce the mass of CNG pressure vessel reinforced with composite materials in the hoop direction. An axisymmetric shell element which takes into account the layered liner and hoop composite materials is thus developed and incorporated into a program Axicom. The accuracy of the program is then verified using the 4 noded element in ANSYS. Three different cases of optimization are then performed using the Axicom: (1) uniform hoop thickness, (2) varying hoop thickness, and (3) varying the ply angles and accordingly the thickness. Compared with a traditional method, cases (2) and (3) were found to be very effective in reducing the thickness and cost of the hoop composite materials by about 80% without sacrificing the safety factors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.545-550
• /
• 2004

KSTAR cryostat is a 8.8 m diameter vacuum vessel that provides the necessary thermal barrier between the ambient temperature test cell and the supercritical helium cooled superconducting magnet providing the base pressure of 1 ${\times}$ $10^{-3}Pa$. The cryostat is a single walled vessel consisting of central cylindrical section and two end closures, a flat base structure with external reinforcements and a dome-shaped lid structure. The base structure has 8 equally spaced support legs anchored on the concrete base. The cryostat vessel design was executed to satisfy the performance and operation requirements. The major loads considered in the structural analysis were vacuum pressure, dead weight, electromagnetic load driven by plasma disruption, and seismic load. Based on the fabrication and inspection procedures for the vessel, cryostat vessel was fabricated and inspected. It was confirmed that the inspection results were acceptable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.586-589
• /
• 2005

Recently, the applications of unmanned system are steadily increasing. Unmanned automatic system is suitable for routine mission such as reconnaissance, environment monitoring, resource conservation and investigation. Especially, for the ocean environmental probe mission, many ocean engineers had scoped with the routine and even risky works. The unmanned surface vessel designed for sea probes can replace the periodic and routine missions such as water sampling, temperature and salinity measuring, etc. In this paper, an unmanned surface vessel was designed for ocean environmental probe missions. A classical and an adaptive fuzzy control system were designed and tested for the unmanned surface vessel. The design methodologies and performance of the surface vessel and fuzzy control algorithm were illustrated and verified with this unmanned vessel system designed for sea probes.

• 한국IT서비스학회지
• /
• 제12권2호
• /
• pp.335-348
• /
• 2013

Vessel PMS (Planned Maintenance System) is a paper and/or software based system to monitor vessel engine equipment including main propulsion, steering, auxiliary machinery and cargo handling information. This is one of mandatory survey for vessel introduced by IMO (International Maritime Organization). The planned maintenance as well as documentation must be performed according to a system to be approved by classification agencies. Recently, vessel owners have preferred software based systems to collect and preserve accurate data. However, not ship specific and not taking into account the user are said by end users as operational difficulties. To relieve these concerns, this research analyzes vessel PMS data, suggests a middleware to support automatic collection and design consideration of user interface.

• 대한안전경영과학회지
• /
• 제7권4호
• /
• pp.85-99
• /
• 2005

The main objective of this paper is to search whether containment vessel's best pressure may increase until how long when loss of coolant accident (LOCA) happened in containment vessel of Ulchin nuclear power plant 1 and 2. Another goal of this research is to find the influential factors that increase containment vessel pressure. Model for this research is Ulchin nuclear power plant 1 with 10 cycles. Data were collected by simulator of Ulchin nuclear power plant 1 and design of experiment was used for data analysis. For the experiment, seven factors that are going to influence in containment vessel pressure were chosen. It was found that fatter which influences in early rise of containment vessel pressure after LOCA is only explosion size. Also, containment vessel's best pressure (3.74 bar.a) was much lower than limit (4.86 bar.a) of FSAR (Final Safety Analysis Report).

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.462-469
• /
• 2019

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessels, such as barge ships, are used for several purposes. Generally, these vessels have no power propulsion system and are towed using ropes and towing vessel (tugboats). The basic mathematical model of the towed vessel in which three active rudders are attached was introduced from a previous study. Owing to the dependency of the motions of the towed vessel to the towing ship, a method is suggested to cope with the undesirable disturbance and improve the tracking performance. For the simulation study, a model of the towed vessel with a towing ship is made, and necessary physical parameters are identified from the experiment. For the defined and linearized model, a control system is designed, and the control performance is also evaluated. A simulation study is conducted and the effectiveness of the proposed control strategy is verified.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.119-120
• /
• 2000

The thermal shield for the TF coils and PF coils has been located between the coils and vacuum vessel. The thermal shielding cryopanel is cooled under 80K by a fored flow of helium gas using cooing pipes on the cryopanel. Design of the KSTAR thermal shield of vacuum vessel is described.