• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.117-124
• /
• 2024

The objective of Value Engineering (VE) is to derive the optimal value at the most efficient life cycle cost, comprising three stages: Pre-Study, Study, and Post-Study. In this study, we propose a method for information collection and analysis during planned site visit surveys in the preparation stage of VE. The 3D spatial model, created using a drone, facilitated observation and analysis of the study area from various angles, both from the center and the outside. Additionally, through the utilization of drones, we conducted on-site investigations of the research area's 3D spatial model, enabling a macroscopic perspective previously only feasible through a microscopic viewpoint during planned site visits in the pre-study phase. Furthermore, the utilization of actual spatial data obtained from observations allowed for real-time information verification during Design VE workshops, enhancing the efficiency and reliability of the VE project.

• Journal of Korean Society of Archives and Records Management
• /
• v.24 no.1
• /
• pp.137-161
• /
• 2024

Professional competencies serve to demonstrate and develop expertise. As such, the study summarized theories on the concept of competency and competency model development and utilization, proposing ways to utilize the competency system to strengthen domestic archivists' expertise through a case study of international archivist competency systems. Five competency frameworks for archivists developed by international archivist associations were analyzed. Results showed that the archival profession's competency frameworks were primarily utilized in two ways. First, they are used to verify professional definitions, which are used as verification standards for registering certified professionals at the archivist association level. Second, they are used to enhance expertise in conjunction with individual professional self-assessment and continuing professional development program design. These two applications can operate in a complementary relationship to utilize the competency framework in demonstrating and strengthening competencies.

• The Journal of Information Systems
• /
• v.33 no.1
• /
• pp.1-30
• /
• 2024

Purpose The purpose of this study is to examine the customer experience of generative AI among office workers aged 30 to 40, investigating usability, usefulness, and affect, and understanding concerns and expectations. Design/Methodology/Approach This research used Q methodology to assess the customer experience of generative AI. Users are engaged in a problem-solving journey, and data is collected by having participants rank 36 statements based on usability, usefulness, and affect, referred to as the three goals of User Experience. Participants use a forced distribution table with a scale from -5 to +5 to indicate the subjective importance of each statement. The results identified four groups, reflecting different perspectives and attitudes toward generative AI. Findings Participants express overall comfort with generative AI, perceive AI as more knowledgeable in unfamiliar domains, but harbor doubts about AI's understanding. Disagreements emerge on AI replacing humans, the value of unique human roles, data confidentiality, fears of AI advancement, and emotional impacts. Identified four groups: Users who treat AI as a soulless assistant and are active in business use, Uncle users who want to use new technologies properly and are not afraid of technology, users who recognize the limits of AI despite its efficiency, and users who require strong verification in the future. It has the potential to guide future guidelines, ethical codes, and regulations for the appropriate use of AI. In addition, this approach lays the groundwork for future empirical analyses of generative AI.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2024

As technology advances swiftly and the lifespan of products becomes increasingly short, there is a demand to fasten the pace of research outcomes, product development, and market introduction. As a result, the researchers and developers need a computational experiment environment that enables rapid verification of the experiment and application of research findings. Such an environment must efficiently harness all available computational resources, manage simulations across diverse test scenarios, and support the experimental data collection. This research introduces the design and implementation of an experimental frame based on a microservice architecture. The experimental frame leverages scripts to utilize computing resources optimally, making it more straightforward for users to conduct simulations. It features an experimental frame capable of automatically deploying scenarios to the computing components. This setup allows for the automatic configuration of both the computing environment and experiments based on user-provided scenarios and experimental software, facilitating effortless execution of simulations.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.105-114
• /
• 2024

Clinical laboratories endeavor to secure quality by establishing effective quality management systems. However, laboratory environments are complex, and single quality control procedures may inadequately detect many errors. Patient-based real-time quality control (PBRTQC) is a laboratory tool that monitors the testing process using algorithms such as Bull's algorithm and several variables, such as average of normal, moving median, moving average, and exponentially weighted moving average. PBRTQC has many advantages over conventional quality control, including low cost, commutability, continuous real-time performance monitoring, and sensitivity to pre-analytical errors. However, PBRTQC is not easily implemented as it requires statistical algorithm selection, the design of appropriate rules and protocols, and performance verification. This review describes the basic concepts, methods, and procedures of PBRTQC and presents guidelines for implementing a patient-based quality management system. Furthermore, we propose the combined use of PBRTQC when the performance of internal quality control is limited. However, clinical evaluations were not conducted during this review, and thus, future evaluation is required.

• Wind and Structures
• /
• v.38 no.2
• /
• pp.129-146
• /
• 2024

Aiming at the problem of non-stationary wind field simulation of downbursts, a non-stationary down-burst generation system was designed by adding a nozzle and program control valve to the inlet of the original wall jet model. The computational fluid dynamics (CFD) method was used to simulate the downburst. Firstly, the two-dimensional (2D) model was used to study the outflow situation, and the database of working conditions was formed. Then the combined superposition of working conditions was carried out to simulate the full-scale measured downburst. The three-dimensional (3D) large eddy simulation (LES) was used for further verification based on this superposition condition. Finally, the wind tunnel test is used to further verify. The results show that after the valve is opened, the wind ve-locity at low altitude increases rapidly, then stays stable, and the wind velocity at each point fluctuates. The velocity of the 2D model matches the wind velocity trend of the measured downburst well. The 3D model matches the measured downburst flow in terms of wind velocity and pulsation characteris-tics. The time-varying mean wind velocity of the wind tunnel test is in better agreement with the meas-ured time-varying mean wind velocity of the downburst. The power spectrum of fluctuating wind ve-locity at different vertical heights for the test condition also agrees well with the von Karman spectrum, and conforms to the "-5/3" law. The vertical profile of the maximum time-varying average wind veloci-ty obtained from the test shows the basic characteristics of the typical wind profile of the downburst. The effectiveness of the downburst generation system is verified.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.880-885
• /
• 2024

For Safety Assisted Engineering works, real-time simulators have emerged as a mandatory tool among all the key actors involved in the nuclear industry (utilities, designers and safety authorities). EDF, Electricité de France, as the leading worldwide nuclear power plant operator, has a crucial need for efficient and updated simulation tools for training, operating and safety analysis support. This paper will present the work performed at EDF/DT to develop a new generation of engineering simulator to fulfil these tasks. The project is called SiRENE, which is the acronym of Re-hosted Engineering Simulator in French. The project has been economically challenging. Therefore, to benefit from existing tools and experience, the SiRENE project combines: - A part of the process issued from the operating fleet training full-scope simulator. - An improvement of the simulator prediction reliability with the integration of High-Fidelity models, used in Safety Analysis. These High-Fidelity models address Nuclear Steam Supply System code, with CATHARE thermal-hydraulics system code and neutronics, with COCCINELLE code. - And taking advantage of the last generation and improvements of instructor station. The intensive and challenging uses of the new SiRENE engineering simulator are also discussed. The SiRENE simulator has to address different topics such as verification and validation of operating procedures, identification of safety paths, tests of I&C developments or modifications, tests on hydraulics system components (pump, valve etc.), support studies for Probabilistic Safety Analysis (PSA). etc. It also emerges that SiRENE simulator is a valuable tool for self-training of the newcomers in EDF nuclear engineering centers. As a modifiable tool and thanks to a skillful team managing the SiRENE project, specific and adapted modifications can be taken into account very quickly, in order to provide the best answers for our users' specific issues. Finally, the SiRENE simulator, and the associated configurations, has been distributed among the different engineering centers at EDF (DT in Lyon, DIPDE in Marseille and CNEPE in Tours). This distribution highlights a strong synergy and complementarity of the different engineering institutes at EDF, working together for a safer and a more profitable operating fleet.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.141-152
• /
• 2007

Considering uncertainties of random input data, it is more reasonable to use probabilistic method than the conventional deterministic method for the design of structures or for the assessment of the responses of structures, which are designed as safe even under extreme loads. Therefore, to assess the quantitative effects of the constructed cable stayed bridge by the input random variables, a sensitivity analysis is studied. Using perturbation method, an analysis program is developed for the iterative probabilistic finite element analyses and sensitivity analyses of the cable stayed bridge, except the initial shape analysis. Monte-Carlo Simulations were used for the verification of the developed program. The results of sensitivity analysis shows the governing effects of external loads. Because the results also provide the sensitive effects of the stiffness of members and the magnitudes of prestressing force of cables, the developed

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.93-100
• /
• 2008

The use of fiber reinforced polymer (FRP) composites is significantly growing in construction and infrastructure applications where durability under harsh environmental conditions is of great concern. In order to examine the applicability of FRP rebar as a reinforcement in flexural member, flexural tests were conducted. 12 beams with different FRP materials such as CFRP, GFRP and Hybrid FRP and reinforcement ratio were tested and analyzed in terms of failure mode, moment-deflection, flexural capacity, ductility index and sectional strain distribution. The test results were also compared with the theoretical model represented in ACI 440.1R06. Test results indicate that the flexural capacity of the beams reinforced by FRP bars can be accurately predicted using the ultimate design theory. They also show that the current ACI model for computing the deflection overestimates the actual deflection of GFRP series and underestimates the deflection of CFRP series.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.943-951
• /
• 2024

This paper considers the simulation-based installation and operation safety analysis of installation and operation machinery of USBL as underwater equipment in operation environments. The simulation model of this mechanical system was developed using flexible multibody dynamics simulation technology. Operation and environmental conditions were applied using dynamic forces model considering ocean environments. The developed simulation model was used to evaluate operation safety through eigenvalue analysis, dynamic forces analysis, and structural analysis. As the analysis results, the operation safety was very low in extreme operation condition due to increase of dynamic loads by VIV effect. It was not a problem because safety factor had more than 2.0 in this case. However, the operation safety should be further strengthened because the USBL and LARS was installed and utilized in unmanned vessel with automatic controls. In order to improve safety by avoiding VIV frequency, we redesigned the USBL pole.