• Archives of design research
• /
• v.3 no.1
• /
• pp.17-33
• /
• 1990

Evaluation plays an essential role in design activity. Many theorist have agreed that designing involves problem solving or decision making. In evaluation, designers attempt to determine the value of a particular proposal arrived at by synthesis. And the results of designing, the product, is evaluated twice, objectively and subjectively.Alternatives in $$\mu$ti-objective decision problems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitiative factors are difficult to quantify as $$\mu$eral estmates, these factors have tended to be ignored without regard for their importance to human content. Therefore we need some study that convert qualitative attributes into quantitative scale values. Following to Thurstone' s Psychological scaling methods (The method of successive intervals), attribute values of TV set are assigned by rating scale methods. The method of successive intervals, like the method of equal-appearing intervals, requires but a single judgement from each subject for each statement to be scaled. It is, therefore, a convinient method to use when the number of to be scaled is large. We make the assumtion that those cu$$\mu$ative proportion distributions are normal for each statement when they are projected on the unknown psychological continuum. In this study, we have determined the scale values of 42 statements of TV set by the method of successive intervals. Then we can apply a test of internal consistency similar to that used with the method of paired comparisons. We have as our absolute average deviation, -1.748/252= -0.0069. We have reason to believe that our scale values are consistent with the empirical data, because these discrepanicies are very small.

• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.659-660
• /
• 2016

This paper presents an improved evaluation method, based on National Competency Standards (NCS), of National Technical Qualification (NTQ) examination in Electronics Fields such as Craftsman Computer, Industrial Engineer Computer Maintenance Control, Engineer Computer System Application, Engineer Computer, Engineer Embedded) to reflect practical vocational abilities and raise values of NTQ certificates. To evaluate each NTQ examination, we carefully chose corresponding NCS competency units for practical performance test, written subjective test, and mixed test through the advisory committee with industry, education, and qualification experts. In addition, we verified useful effects of the NCS-based evaluation method by performing and analyzing the simulated tests. We used both single and mixed problems in practical performance test and new problems about system design and implementation based on various working scenarios in written subjective test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1251-1259
• /
• 2013

In this study, high temperature design and creep-fatigue damage evaluation of a decay heat exchanger (DHX) in the decay heat removal systems of a sodium-cooled fast reactor (SFR) have been performed. Detail design and 3D finite element analysis have been conducted for the DHXs to be installed in active and passive decay heat removal systems in Korean Generation IV SFR, and the DHX installed in the STELLA-1(Sodium integral effect test loop for safety simulation and assessment) at KAERI (Korea Atomic Energy Research Institute). Evaluations of creep-fatigue damage based on full 3D finite element analyses were conducted for the two Mod.9Cr-1Mo steel heat exchangers according to the elevated temperature design codes of ASME Section III Subsection NH and RCC-MR code. Code comparisons were made based on the creep-fatigue damage evaluation and issues on conservatisms of the design codes were discussed.

• Journal of Information Technology Applications and Management
• /
• v.27 no.6
• /
• pp.101-116
• /
• 2020

This study attempts to derive critical success factors and prioritize activities for implementing the automation of software test. Software testing proceeds in five steps of test plan, test case design, test scripting & test environment setup, test execution & evaluation, and test closure. From the literature, twenty influence factors in the five steps were identified. Focus Group Interviews with ten experts in software testing selected fourteen factors on the basis of importance and feasibility. Some factors were further divided to clarify their meanings and the number of influence factors finally became twenty one. A survey on the influence factors was conducted with 75 IT professionals. An importance-feasibility analysis was applied to the survey responses and classified the influence factors into four groups of essential factors, critical factors, low priority factors, and minimal factors. Essential factors include objectives for test automation, strategies for test automation, test automation training, test automation education, setting up test automation environment, setting up test environment, test automation tool selection. Critical factors include management's continued support, management's continued interest, role of automation engineers, and skills of automation engineers. This result suggests that a lot of efforts should be put into SW test plan for the successful SW test automation and SW automation should proceed in consideration with the priorities and resource consumption.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.411-415
• /
• 1996

User's sensibility has an important effect upon appreciating household electronic appliances and user's feeling of satisfaction with products has a good effect on the choice of product on purchasing those items. In this point of view, the human-oriented approach of product development system can be adopted as Human Sensibility Engineering. The target of changed development system is to define user's sensibility factors and to apply them to design and development. In this study, the human sensibility ergonomics approach and usability test have been applied to the development and evaluation of an electronic product model.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.787-796
• /
• 1995

A man model is a useful design tool for the evaluation of man machine systems and products. An arm reach trajectory prediction for such a model will be specifically useful to present human activities and, consequently, could increase the accuracy and reality of the evaluation. In this study, a three-dimensional reach trajectory prediction model was developed using an inverse kinematics technique. The upper body was modeled as a four link open kinematic chain with seven degrees of freedom. The Resolved Motion Method used for the robot kinematics problem was used to predict the joint movements. The cost function of the perceived discomfort developed using the central composite design was also used as a performance function. This model predicts the posture by moving the joints to minimize the discomfort on the constraint of the end effector velocity directed to a target point. The results of the pairwise t-test showed that all the joint coordinates except the shoulder joint's showed statistically no differences at .alpha. = 0.01. The reach trajectory prediction model developed in this study was found to accurately simulate human arm reach trajectory and the model will help understand the human arm reach movement.

• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.141-153
• /
• 2003

The object of this study is to understand the problems of combat uniform garments through a survey regarding current wearing conditions, and furthermore to propose a combat uniform design more well suited to movement and body type. For this study, a survey of soldiers on active service was conducted. Based on the analysis of the survey results, a design that addressed the weak points of the garments currently in use was proposed. Four sets of experimental garments were created and in addition to present combat uniforms used in sensory tests to evaluate appearance and movement. In terms of the results of the evaluation of the appearance and movement evaluation. the test garments were generally received more favorably than the uniforms in current use.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.59-62
• /
• 2001

Reliability engineering is regarded as the major and important roll for all industry. And advanced manufacturing systems with high speed and intelligent have been developing for the betterment of machining ability. In this study, we have systemized evaluation of reliability for machinery system. We proposed the reliability assessment and design review method using analyzing critical units of high speed and intelligent machine system. In addition, we have not only designed and developed test bed system for acquiring reliability data, but also apply QFD technique for satisfying quality function which is provided in design phase. From this study, we will expect to guide and introduce the reliability engineering in developing and processing phase of high quality product.