Journal of the Korea Institute of Military Science and Technology
/
v.23
no.2
/
pp.185-193
/
2020
This paper proposes a 3-screen multi-function console development method using ergonomic design approach. Ergonomically designed console has the advantage of decreasing operator fatigue and increasing concentration by providing better readability, operability and convenience. For this, thirty subjects participated in the experiment for 3-screen multi-function console design. Ergonomic standards of console design were used to establish experiment design and to eliminate incompatible results with ergonomic standards. Subjects evaluated the nine predefined placements of displays and asked to place the display and controllers in order to use comfortably. As a results, total 18 design criteria including displays and controllers placement were determined.
Journal of the Korean Society of Clothing and Textiles
/
v.37
no.3
/
pp.280-291
/
2013
This paper analyzes desirable breast types using measurements from 31 selected female subjects based on the ratio of breast in works of art and to design a brassiere cup design according to the breast type of 182 female subjects in their 20s. The subjects selected for this paper are somewhat larger than a previous study on aesthetically perfect breasts of foreigners according to chest breadth, center neck point to breast point, breast circumference, and breast volume. However, the aesthetic breasts of foreigners are larger than the subjects selected for this study according to chest depth, under-bust circumference, and bust point to bust point. Comparing various breasts types and aesthetic breasts, padding is necessary to complement the form of flat breasts to increase the volume and diameter. Brassiere cups for cone-shaped breasts should be designed to increase breast volume through an increase in nipple height. Hemisphere breasts should be designed to increase the overall volume-leaving diameter. Protrusion breasts should enhance the functions of aggregating and supporting without any increase or decrease of the breast volume. Drooping breasts require the ability to support a large volume to stabilize the breast. Subjects were selected depending on the ratio of breast silhouette as works of art and who have large breasts in disproportional to a slender trunk. Three items, the circumferential length of breast, height of the nipple, and the depth of inner breast using the anthropomorphic measurements of 182 subjects were measured through regression equations for breast volume. Breast volume = -394.86 + 27.52 ${\times}$ (the circumferential length of breast) + 18.73 ${\times}$ (height of the nipple) + 12.85 ${\times}$ (the depth of inner breast). Regression equations to extract the aesthetic breast volume in measurements irrelevant to breasts using the anthropomorphic measurements of 31 subjects were as follows. Aesthetic breast volume = -611.30 + 17.67 ${\times}$ (bust circumference) -24.29 ${\times}$ (under-bust circumference) + 16.31 ${\times}$ (neck point to breast point to waistline) + 22.83 ${\times}$ (bust breadth) + 12.22 ${\times}$ (waist depth) -8.34 ${\times}$ (interscye- front). This prediction equation is useful to develop a breast type brassiere pattern, complement breast enhancement surgery, or minimize the effect a mastectomy.
The Journal of Sustainable Design and Educational Environment Research
/
v.17
no.3
/
pp.17-25
/
2018
In this research, we analyze the factors considered by parents of subjects of special education when selecting special educational institutions for children, and present proposals for improving the placement plan of special subjects, The results are as follows. First, for special education subjects, a considerable number of kindergarten processes are required for compulsory education, and special education subjects are selected for elementary school entrance. Second, the factors of choosing the special educational institution of parents of special education subjects are the expertise of the teacher and the operation of the curriculum, the type and extent of child disability, the distance to school and the way of commuting, educational facilities, Treatment room etc). Thirdly, it was found that parents' choices are the largest among schools in the school area, as to how special education institutions of special education subjects are arranged. For proper placement planning, it is necessary to accurately grasp the number of subjects for special education, so the selection time of the subjects of special education shall be the process of kindergarten at the latest, the disparity of special education institutions and the disparity of educational facilities It is necessary to set school books to solve it.
Purpose: The purpose of this study was to develop and apply a motivation-strengthening obesity management program for obese subjects with visual impairment and evaluate its effects. Methods: The program development and evaluation periods were from March to August 2018. The study design was an experimental study of non-equality, control repeat design. 25 subjects in the experimental group participated in the 12-week obesity management program and the 26 people in the control group did not. Results: The motivation-strengthening obesity management program included stretching exercises for 30 minutes in the morning five times a week. In addition, counseling, education, and group discussions were continued once a week for motivational strengthening. Special custom exercises for blind patients were also completed once a week simultaneously. Both of these activities were continued for 50 minutes a week for a total of 12 weeks. Measurements were recorded periodically to identify the sustained effects of the program. The obese subjects with visual impairment improved their knowledge of obesity, perceived disability, self-efficacy of exercise, and quality of life related to obesity through the motivational obesity management program. Waist circumference, systolic blood pressure, diastolic blood pressure, and fasting blood sugar were also improved in obese subjects. Conclusion: The study findings indicate that this program could be an active intervention for the control of weight gain in participants with visual impairment. Therefore, the motivation-strengthening program based on the ADDIE (Analysis, Design, Development, Implementation& Evaluation) model could be an effective strategy for better health outcomes of obese subjects with visual impairment.
3D form study is one of basic subjects in industrial design education. There are an array of textbooks of visual art, design and architecture, most of which address basic geometrical form study and abstract forms. With the introduction of computerization, current trends are directed to reduce basic form education and students' participation in classes and their accomplishments. This study was intended to develop works under a theme of furniture design with concrete shapes and functions. This study focused on developing relevant process by fusing 3D form study and furniture design which fall into basic design and design studio subjects, respectively. Among 3D form studies, applied were a concept of 3D configuration that explores the relations between surface forms and 3D forms. Furniture design is a challenge to students at beginner or intermediate level in basic design education from initial devising stage to production in kind. To ease high level of difficulties at designing and producing stages, technical education was systematized in the process of conceptualizing, developing idea and production. This type of challenge was carried out during separate semesters, along with a case study done to develop different types of challenges. This study helped students to be motivated and actively participate in classes and well perform advanced form study and technical training from design to actual production.
The purpose of the present study was to identify the effects of communicator, type of clothing and subject's age on informational influence in clothing conformity. The sample consisted of 205 subjects assigned to two groups (female college students in their early twenties and housewives in their late thirties living in kyongju). In this study the research design consisted of a 3(communicator)×2(subject's age)×2(type of clothing) factorial design. The stimuli consisted of 10 color photographs (6 one-piece dresses and 4 jeans in current fashion) In the first step, subjects were asked to arrange stimuli in the order of greatest fashionability. In the second step, subjects were exposed to experimental manipulation which consisted of slides of various clothing styles and an essay concerning a forecast on fashion trends. The communicator in the essay was described as a designer, a college student, or a housewife. In the third step, in addition to other questions subjects were asked to indicated their degree of agreement with the essay. The data were analyzed by ANOVA, X2 and t-test. The results were: 1. Informational influence on clothing conformity varied by communicator, type of clothing, and subject's age. Subjects were most conforming when the communicator was described as a designer and when the clothing style was a one-piece dress. 2. Informational influence results revealed that housewives were more conforming than the female college students in the jean style.
Purpose: This study was conducted to investigate the effects of foot reflexzone massage on state - anxiety and discomfort of ovarian cancer patients receiving chemotherapy. Method: A quasi experimental design with a non equivalent control group and non synchronized design was used. The experiment was conducted from October 1, 2003 to September 30, 2004. The subjects consisted of 40 patients admitted to C University Hospital. Twenty subjects were assigned to the experimental group and received foot reflexzone massage everyday for 3 days. The other 20 subjects were in the control group and received routine care. Foot reflexzone massage was done on both feet of the subjects for 30 minutes for 3 days using standard protocol. The 'State-Anxiety Inventory' developed by Spielberger was used to measure the degree of state-anxiety. Discomfort was assessed using the 'Symptom Distress Scale' of McCorkle and Young. Data was analyzed by a SAS program using t-test, Wilcoxon signed rank sum test and Wilcoxon rank sum test. Results: State-anxiety and discomfort of subjects receiving foot reflexzone massage were significantly lower than those of the control group. Conclusion: These findings indicate that foot reflexzone massage could be an effective nursing intervention for relieving state-anxiety and discomfort in ovarian cancer patients.
Driver centered vehicle design is the important factor for driver's safety, product quality, and so on. Therefore, people has recently recognized the importance of driver centered vehicle design. Especially, in the focus of driver-vehicle interaction system, it is very important factor to ergonomic design of vehicle cockpit. In this study, Sketch Map method was used to measure of driver's cognitive map on IP(Instrument Panel) that is the basic factor to ergonomic design for vehicle cockpit. The compatibility of Sketch Map method was validated for the measurement of driver's cognitive map and then the accuracy between two groups was analyzed using Sketch Map method. Subjects were divided in two groups, the first group of subjects has their own vehicles and driver license, and the second group of subjects doesn't have own vehicle but has driver license. The result showed that for the case of the first group, the shape of IP in the cognitive map was influenced by IP of their each vehicle. However, for the case of the second group, it showed the difference between IP in the cognitive map and IP of experienced vehicle many times because they have been driving various type of vehicle. So, the shape of IP in the cognitive map was influenced by various type of IP.
Journal of the Korea Fashion and Costume Design Association
/
v.16
no.3
/
pp.15-31
/
2014
The purpose of this study was to investigate the effects of sociocultural attitudes toward appearance on male consumers' apparel buying behavior and appearance management behavior. The subjects were 353 males aged from 40 to 59 years old. The research method was a survey and the questionnaire consisted of sociocultural attitude toward appearance items, apparel buying behaviors items, appearance management behaviors items, and subjects' demographic characteristics items. The data were analyzed by Cronbach's ${\alpha}$, factor analysis, cluster analysis, multiple response analysis, ${\chi}2$ test, ANOVA and Duncan's multiple range test. The results were as follows. Three dimensions (appearance importance awareness, slimness importance awareness, internalization) were emerged on sociocultural attitude toward appearance, and subjects were divided into 4 groups(receptive, unreceptive, awareness, and internalized group) by this variable. The 4 groups by sociocultural attitude toward appearance showed many differences on apparel buying behaviors and appearance management behaviors. Receptive and internalized group more importantly regarded fashion trend and store display as apparel buying motives, design and trend as selection criteria, and did shopping to buy clothes more often than awareness and unreceptive group. Receptive and internalized group recognized higher the need for various appearance management behaviors and spent more expense to enhance their appearance than other groups.
Design process is the essential technology for development of industry in nation, but contrary to its significance the trial for development of design technology is not so active because it requires a lot of time and efforts to educate design engineers. For that reason, most of enterprises concentrated their efforts for improving product technologies to get instant effects in short periods, and through these trials considerable results could be achieved. Recently, however, many people realized that industrial development through only product technology without design technology has limits, accordingly, a lot of efforts, to educate machine designers whom have enough knowledge and ability on design through advanced design technology, concentrated for industrial development. In general, the curriculum of conventional education for machine design in most universities is mainly compose of three subjects, the theory for elements design, geometric modeling practice for mating engineering drawings using CAD software, and analysis of elements using CAE software fur determining whether proposed solution is correct or rational. Furthermore, because these three subject are provided for students as the completely separated subjects, most of students who have educated with this method have no enough ability to Integrate all design process into a comprehensive whole process. This paper proposes a new design education methodology through reverse engineering that can overcome these problems of conventional education method.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.