• Journal of Korean Academy of Nursing
• /
• v.3 no.3
• /
• pp.119-132
• /
• 1973

This study observed on habitual methods of toilet training for infants and toddlers in Korea thru 300 mothers at four medical institutions Ewha Woman′s University Hospital, Ewha Maternal and Child Health Center, Severance Hospital and Seoul National University Hospital) with a design to analyze beginning time, duration of period, methods employed, motives, equipments used, special terminology used for the subject training. The main purpose of this study was to generalize the proper methods of toilet training, and also to contribute a better psychological education for the mother and child. The results obtained from this study were as follows; 1. Majority of (67.3%) observed were in the age category between 30 and 40 years, and dominant numbers (64.7%) were housewives with high level of education and from middle class family background. 2. In the most cases (85%), toilet training was carried out by mothers(including wives who had a job) while more than half of mothers (53.7%) maintained their important motive for the training was "due to having high regard for cleanliness" 3. As for the time of beginning toilet training: finding indicated that starting period was decided (70%) at inconsiderate desertion of each mother. whereas, only minority group (30%) represents the cases where mother started the training when they consider tile child was physically and psychologically randy. Also greater number (77.7%) started bladder training prior to that of bowel. 4. It is noticeable that in course of training a large number of mothers (48.3%) applied strict training method when the child proper talenting, and the more rigid and strict in tile training. the more malformation of personality of the infant and toddler were seen after the training period (P<0.01). 5. Over the half of the total cases denoted (bowel 54.3%, bladder 67.7%) starting period before one year and in most cases (bowel 79.3%, bladder 729)the training was accomplished within 12 month, and therefore it was noted that earlier start(before 1 year) shortened the training period (with 12 month) . There was no significant difference between male and female infants in both starting period and duration of period in bladder training, however, in bowel training there was a tendency that female started earlier(7-12 months needed, 51.4%) than tile male (13-18 months needed, largest number 41.4%), and also in cases of female the period for needed for training were shorter than the cases of male. 6. Many a number (bowel 50.3%, bladder 97.7%) employed the method of continuous talenting at regular interval in accordance with that of child′s habit formed before training. Equipment used were various kinds, however, pieces of paper for male (45.5%) and piss pot or bedpost (42.3%) for female were common, on the other hand, "Eung-ga" for defecation (52.3%) and "Shii" for the urination (95.3%) were most standard expression that used during the training period.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.75-84
• /
• 2014

Purpose - This article aims to examine whether the stock issuance of firms in the retail industry follows Myers' (1984) pecking order theory, which is based on information asymmetry. According to the pecking order model, firms have a sequence of financing decisions, of which the first choice is to use retained earnings, the second one is to get into safe debt, the next involves risky debt, and the last involves finance with outside equity. Since the 2000s, the polarization of the LEs (Large enterprises) and SMEs (Small and Medium Enterprises) arose in the retail industry. The LEs exhibited an improvement in growth and profitability, whereas SMEs had a tendency to degenerate. This study contributes to corroborating the features of financing decisions in the retail industry distinguished from the other industries. Research design, data, and methodology - This study considers the stocks listed on the KOSPI and KOSDAQ markets from 1991 to 2013, and is more concentrated on the stocks in the retail industry. The data were collected from the financial information company, WISEfn. The empirical analysis is conducted by employing two measures of net equity issues (and), which were introduced in Fama and French (2005), and can be calculated from firms' accounting information. All variables are generated as the aggregate value of the numerator divided by aggregate assets, which, in effect, treats the entire sample as a single firm. Substantially, the financing decisions of the firms were analyzed by examining how often and under what circumstances firms issue and repurchase equity. Then, this study compares the features of the retail industry with those of the other industries. Results - The proportion of sample firms that show annual net stock issues reaching the level of the year's average was 54.33% for the 1990s, and fell to 39.93% per year for the 2000s. In detail, the fraction of the small firms actually increases from 45.08% to 51.04%, whereas that of large firms shows a dramatic decline from 58.94% to 24.76%. Considering the fact that the large firms' rapid increase in growth after the 2000s may lead to an increase in equity issues, this result is rather surprising. Meanwhile, net stock repurchases of assets are considerably disproportionate between the large (-50.11%) and the small firms (-15.66%) for the 2000s. Conclusions - Stock issuance of retail firms is not in line with the traditional seasoned equity offering based on information asymmetry. The net stock issuance of the small firms in the retail industry can be interpreted as part of an effort to reorganize business and solicit new investment to resolve degenerating business performance. For large firms, on the other hand, the net repurchase can be regarded as part of an effort to rearrange business for efficiency and amplifying synergy across business sections through spin-off. These results can help the government establish a support policy on retail industry according to size.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.1
• /
• pp.11-27
• /
• 2016

Objective: The purpose of this study was to develop and evaluate high technology adaptive driving controls, such as mini steering wheel-lever system and joystick system, for the people with physical disabilities in the driving simulator. Background: The drivers with severe physical disabilities have problems in operation of the motor vehicle because of reduced muscle strength and limited range of motion. Therefore, if the remote control system with driver-by-wire technology is used for adaptive driving controls for people with physical limitations, the disabled people can improve their quality of life by driving a motor vehicle. Method: We developed the remotely controlled driving simulator with drive-by-wire technology, e.g., mini steering wheel-lever system and joystick system, in order to evaluate driving performance in a safe environment for people with severe physical disabilities. STISim Drive 3 software was used for driving test and the customized Labview program was used in order to control the servomotors and the adaptive driving devices. Thirty subjects participated in the study to evaluate driving performance associated with three different driving controls: conventional driving control, mini steering wheel-lever controls and joystick controls. We analyzed the driving performance in three different courses: straight lane course for acceleration and braking performance, a curved course for steering performance, and intersections for coupled performance. Results: The mini steering wheel-lever system and joystick system developed in this study showed no significant statistical difference (p>0.05) compared to the conventional driving system in the acceleration performance (specified speed travel time, average speed when passing on the right), steering performance (lane departure at the slow curved road, high-speed curved road and the intersection), and braking performance (brake reaction time). However, conventional driving system showed significant statistical difference (p<0.05) compared to the mini steering wheel-lever system or joystick system in the heading angle of the vehicle at the completion point of intersection and the passing speed of the vehicle at left turning. Characteristics of the subjects were found to give a significant effect (p<0.05) on the driving performance, except for the braking reaction time (p>0.05). The subjects with physical disabilities showed a tendency of relatively slow acceleration (p<0.05) at the straight lane course and intersection. The steering performance and braking performance were confirmed that there was no statistically significant difference (p>0.05) according to the characteristics of the subjects. Conclusion: The driving performance with mini steering wheel-lever system and joystick control system showed no significant statistical difference compared to conventional system in the driving simulator. Application: This study can be used to design primary controls with driver-by-wire technology for adaptive vehicle and to improve their community mobility for people with severe physical disabilities.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.28-35
• /
• 2012

Recently, as the social interest increase has been focused on new renewable energy system to build-up sustainable urban planning system, the related studies have been actively conducting. As well as in other areas, the construction area, which accounts for over 40% of the total energy consumption, clearly showed this tendency. Whereas, various landscape facilities applying renewable energy equipments have been manufactured and installed, systematic study available for planning and designing is rarely found in Korea. This study is expected to contribute to the landscape planning and designing by quantifying the energy-efficient and economic advantages of the renewable energy system for landscape facilities. For this purpose, the analysis on the energy-efficiency and economic values under the scenario that the current fossil power supply for the streetlights in urban parks in Seoul, Daegu, and Incheon were replaced by photovoltaic power generation were performed through RETScreen$^{(R)}$ a clean energy simulation program based on the NASA Satellite Meteorological Data. As a result, the generated power and the economic values vary depending on the climatic features of the appointed cities. This study will be used to build up the effective decision-making in applying the clean renewable system to the plan and design of landscaping.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.383-399
• /
• 2020

Optimizing the spacing of the disc cutter is a key element in the design of the TBM cutter head, which determines the drilling performance of the TBM. The full-scale linear cutting test is known as the most reliable and accurate test for calculating the spacing of the disc cutter, but it has the disadvantage of costly and time-consuming for the full-scale experiment. In this study, through the numerical analysis study based on the discrete element method, the tendency between Specific Energy-S/P ratio according to uniaxial compression strength and penetration depth of rock was analyzed, and the optimum spacing of 17-inch disc cutter was derived. To examine the appropriateness of the numerical analysis model, the rolling force acting on the disc cutter was compared and reviewed with the CSM model. As a result of numerical analysis for the linear cutting test, the rolling force acting on the disc cutter was analyzed to be similar to the rolling force derived from the theoretical formula of the CSM model. From the numerical analysis on 5 UCS cases (50 MPa, 70 MPa, 100 MPa, 150 MPa, 200 MPa), it is found that the range of the optimum spacing of the disc cutter decreases as the rock strength increases. And it can be concluded that 80~100 mm of disc cutter spacing is the optimum range having minimum specific energy regardless of rock strength. This tends to coincide with the optimal spacing of previously reported disk cutters, which underpins the disk cutter spacing calculated through this study.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.23-36
• /
• 2011

The purpose of this study is to make theoretical examinations into the makeup trend shown in digital communication environment and thereby determine potential associations of makeup trend with digital communication environment and characterize said trend, so that it can provide reference materials required for follow-up studies. This study comes to the following findings: First, it is found that there are sociocultural characteristics of digital communication environment, such as interactivity, technology-orientedness, sentiment-orientedness and mixture of time and space. Secondly, it is found that trends developed in makeup fall categorically into interactivity, virtuality, amusement and mobility. Thirdly, it is found that each type of digital communication adopts a mixture and juxtaposition of contemporary styles or categories with traditional ones through eclectic combination based on open-minded and horizontal ideas. Fourthly, it is found that a trend from digital communication environment doesn't coincide perfectly with any makeup trend, but the former trend works interactively and organically with the latter trend on the basis of homogeneity and similarity within a general framework that represents external esthetics of human being. With the creation of digital communication environment, our contemporary society forms as the complex phenomena of digital society in a combination and destruction of different categories beyond any certain international boundary, so that a hybrid tendency appears in contemporary makeup trend as well. Based on these findings, this study has its implications in the sense that it gives a new viewpoint based on design, formative characteristics and expression styles of makeup, and also provides useful reference materials for related industrial sectors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.75-83
• /
• 2012

In this study, an analytical studies were carried out for the buoyancy preflexion method to improve structural performance of concrete floating structures. The buoyancy preflexion means that the preflexion effects were induced to the floating structure due to the difference in buoyancy between the pontoon modules composing the floating structures. In order to verify the buoyancy preflexion effects, an analytical studies were carried out for the floating structures. The size and dimensions of FE model were determined through the structural design process. The parameter of this analytical study was length ratios of central module part, which induces buoyancy preflexion effects, to the total length. The analysis results were pre-compression on the bottom concrete slab and displacement of freeboard due to buoyancy preflexion effects. These results were processed according to the loading step, buoyancy preflexion loads on the bottom and live loads on the topside. Then, the buoyancy preflexion effects on structural performance was analyzed. As the results of this study, it was found that the buoyancy preflexion significantly influence on structural performance of floating structures. According to the length ratio, the buoyancy preflexion effects have a tendency of parabolic form and maximized at the length ratio of 40~60%. The buoyancy preflexion method is simple in principle and easy in application. Also, it can effectively induce pre-compression on the bottom concrete slab. Therefore, it can be concluded that the buoyancy preflexion method contribute to the improvement of structural performance and decreasing of the cross-sectional depth of floating structures.

• Journal of Distribution Science
• /
• v.13 no.8
• /
• pp.61-71
• /
• 2015

Purpose - Before the year 2000, the housing prices in Korea were increasing every decade. After 2000, for the first time, Korea experienced a decrease in housing prices, and the repetitive cycle of price fluctuation started. Such a "boom and bust cycle" is a worldwide phenomenon. The current study proposes a mathematical model to explain price fluctuation cycles based on the theory of consumer psychology. Specifically, the model incorporates the effects of buyer expectations of future prices on actual price changes. Based on the model, this study investigates various independent variables affecting the amplitude of price fluctuations in housing markets. Research design, data, and methodology - The study provides theoretical analyses based on a mathematical model. The proposed model uses the following assumptions of the pricing mechanism in housing markets. First, the price of a house at a certain time is affected not only by its current price but also by its expected future price. Second, house investors or buyers cannot predict the exact future price but make a subjective prediction based on observed price changes up to the present. Third, the price is determined by demand changes made in previous time periods. The current study tries to explain the boom-bust cycle in housing markets with a mathematical model and several numerical examples. The model illustrates the effects of consumer price elasticity, consumer sensitivity to price changes, and the sensitivity of prices to demand changes on price fluctuation. Results - The analytical results imply that even without external effects, the boom-bust cycle can occur endogenously due to buyer psychological factors. The model supports the expectation of future price direction as the most important variable causing price fluctuation in housing market. Consumer tendency for making choices based on both the current and expected future price causes repetitive boom-bust cycles in housing markets. Such consumers who respond more sensitively to price changes are shown to make the market more volatile. Consumer price elasticity is shown to be irrelevant to price fluctuations. Conclusions - The mechanism of price fluctuation in the proposed model can be summarized as follows. If a certain external shock causes an initial price increase, consumers perceive it as an ongoing increasing price trend. If the demand increases due to the higher expected price, the price goes up further. However, too high a price cannot be sustained for long, thus the increasing price trend ceases at some point. Once the market loses the momentum of a price increase, the price starts to drop. A price decrease signals a further decrease in a future price, thus the demand decreases further. When the price is perceived as low enough, the direction of the price change is reversed again. Policy makers should be cognizant that the current increase in housing prices due to increased liquidity can pose a serious threat of a sudden price decrease in housing markets.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.257-263
• /
• 2021

This study derives the relative cross-section for the natW(p,xn)176Re nuclear reaction by measuring the gamma rays generated from the nuclear reaction with natural tungsten using a 100 MeV linear accelerator of the Korea Multi-purpose Accelerator Complex in the Korea Atomic Energy Research Institute. In general, research on isotopes with a short half-life always shows a tendency that the intensity of radioactivity decreases rapidly within a short period of time, making it very difficult to measure itself. In particular, 176Re is one of the relatively short radionuclides with a half-life of 5.3 minutes. In this study, 109.08 keV gamma rays generated from the 176Re isotope having such a short half-life were measured using a high-purity Ge detector(HPGe detector). The obtained relative measurements were the results in the 8 to 14 MeV proton energy domain published by Richard G. in 1967, and the TENDL-2019 value, which was the result of A. J. Koning in 2019, which evaluated the nuclear reaction cross-section by calculation based on this comparative analysis was performed. The results of this study are expected to be usefully applied to the design of nuclear fusion reactor which is known as future energy sources, elements ratio for the nuclear synthesis of astrophysics.