• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.355-364
• /
• 2007

Recently a concrete slab tracks are being constructed on roadbed in the Gyoeng-bu 2nd phase high speed railways. In respdnding to this trend, new design standards and track materials maintenance systems, based on the slab track material safety and usage perspective, are needed. This research provides a roadbed design criteria and the maintenance system. The proposed roadbed design criteria and the maintenance system are based on the developed analysis meathod of train/slab-track interaction. where the roadbed settlement and train speed are utilized as mediating variables. In the analysis, the dynamic response of train/slab-track interaction apply to various speeds and settlements. the roadbed settlement is shown in a sinusoidal shape of wave, the scope of the settlement occurrence presented in its wavelengths, include 6meters, 10meters, 15merwes, 20meters, 30meters. The train speeds involved are 50, 100, 150, 200, 250, 300, 350, 400kilometers per hour.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.279-282
• /
• 2000

As digital systems continue to use components with faster edge rates and clock speeds, transmission of the digital information in these systems approaches the microwave realm. At these speeds digital signal fidelity becomes both a critical success factor and design challenge. The noise sources in digital systems include the noise in power supply, ground and packaging media due to simultaneous switching of drivers, signal reflections and distortions on single and multiple transmission lines. This paper presents theory, case studies and design considerations of gigabit interconnection for network and communication systems. The case studies show HSPICE and Ampredictor simulations of alternate approaches. Various subjects including skin effect and dielectric losses, interconnect simulations and crosstalks of connector, affected signal discontinuity, are addressed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.50-57
• /
• 1997

A 600HP class high-speed gear driven 3-stage turbo-compressor (IGCC : Integrally Geared Centrifugal Compressor) driven by a 3600 rpm AC induction motor has been designed, of which low speed pinion runs at 35000 rpm and high speed pinion at 50000 rpm nominally. Due to its high speed operation, the system requires very reliable bearing selection and design as well as accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordaynamic analyses of the IGCC rotor-bearing system predicted that the low speed pinion rotor mounted on 5-pad tilting pad bearings has two critical speeds before its design speed and high speed pinion rotor only one critical speed, and estimated critical speeds of both pinion shafts are away from the continuous operating speed enough to satisfy the corresponding API requirement. The forced response analysis with API specified maximum allowable unbalances also showed that unbalance responses are small enough for smooth operation of the system.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.799-806
• /
• 2007

One method for improving the torque capacity of the CVT is to use a split-powered CVT(SPCVT) to reduce the power transmitted into a continuously variable unit(CVU). A variable bridge SPCVT with two planetary gear units(PGUs), which are composed of a sun gear, a ring gear, and carrier and planetary gears, can minimize the power to the CVU. However, a SPCVT with a conventional CVT should possess a dual mode, which would allow the conventional CVT to be used at high speeds and an additional gear train to be used at low speeds. The inner-spherical CVU(ISCVU) with an inner and outer spherical contact mechanism developed in this study can cover the range from low to high speeds. The rated power and the overall speed ratios were 100 kW and $0.09{\sim}0.36$, respectively. Power efficiency was numerically calculated to be over 90% over the speed ratio range of $0.1{\sim}0.29$. The maximum shear stress at the two contact areas of the rotor pairs, the minimum life and the overall size were estimated to be 700 MPa, 276 kh and $350{\times}350{\times}400mm^3$, respectively. This study shows that an ISCVU and a variable bridge type PGU can realize the SPCVT with a single mode for a vehicle.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.633-650
• /
• 2014

The uncertainty of extreme wind speeds is one key contributor to the uncertainty of wind loads and their effects on structures. The probability distribution of annual extreme wind speeds may be characterized using a classical Gumbel Type distribution. The expression that establishes the relationship between the extreme wind speeds at different recurrence periods and the corresponding coefficients of variation is formulated, and its efficacy is validated. The coefficients of variation are calibrated to be about 0.125 and 0.184 according to defined Chinese and US design specifications, respectively. Based on the wind data of 54 cities in China, 49 meteorological stations in the US, 3 stations in Singapore, the coefficients span intervals of (0.1, 0.35), (0.08, 0.20) and (0.06, 0.14), respectively. For hurricanes in the US, the coefficients range approximately from 0.3 to 0.4. This convenient technique is recommended as one alternative tool for coefficient of variation analyses in the future revisions of related codes. The sensitivities of coefficients of variation for 49 meteorological stations in the US are quantified and demonstrated. Some contradictions and incompatibilities can be clearly detected and illustrated by comparing the coefficients of variation obtained with different combinations of recurrence period wind data.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.19-36
• /
• 2014

This paper focuses on a model order reduction (MOR) for large-scale rotordynamic systems by using finite element discretization. Typical rotor-bearing systems consist of a rotor, built-on parts, and a support system. These systems require careful consideration in their dynamic analysis modeling because they include unsymmetrical stiffness, localized nonproportional damping, and frequency-dependent gyroscopic effects. Because of this complex geometry, the finite element model under consideration may have a very large number of degrees of freedom. Thus, the repeated dynamic analyses used to investigate the critical speeds, stability, and unbalanced response are computationally very expensive to complete within a practical design cycle. In this study, we demonstrate that a Krylov subspace-based MOR via moment matching significantly speeds up the rotordynamic analyses needed to check the whirling frequencies and critical speeds of large rotor systems. This approach is very efficient, because it is possible to repeat the dynamic simulation with the help of a reduced system by changing the operating rotational speed, which can be preserved as a parameter in the process of model reduction. Two examples of rotordynamic systems show that the suggested MOR provides a significant reduction in computational cost for a Campbell diagram analysis, while maintaining accuracy comparable to that of the original systems.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.103-111
• /
• 2013

PURPOSES : Previous Speed Profile reflects the patterns of speeds in sections of tangents to curves in the roads. However these patterns are uniform of speeds and Acceleration/Deceleration. In oder to supplement these shortcomings. this study made a new profile which can contain factors of Acceleration/Deceleration through theories of Previous Speed Profiles. METHODS : For sakes, this study developed the speed prediction model of Rural Multi-Lane Highways and calculated Acceleration/Deceleration by appling a Polynomial model based on developed speed prediction model. Polynomial model is based on second by second. Acceleration/Deceleration Profile is developed with the various scenarios of road geometric conditions. RESULTS : The longer an ahead tangent length is, The higher an acceleration rate in curve occurs due to wide sight distance. However when there are big speed gaps between two curves, the longer tangent length alleviate acceleration rate. CONCLUSIONS : Acceleration/Deceleration Profile can overview th patterns of speeds and Accelerations/Decelerations in the various road geometric conditions. Also this result will help road designer have a proper guidance to exam a potential geometric conditions where may occur the acceleration/deceleration states.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.190-198
• /
• 2019

Gas foil bearings (GFBs) enable small- to medium-sized turbomachinery to operate at ultra-high speeds in a compact design by using ambient air or process gas as a lubricant. When using air or process gas, which have lower viscosity than lubricant oil, the turbomachinery has the advantage of reduced power loss from bearing friction drag. However, GFBs may have high Reynolds number, which causes turbulent flows due to process gas with low viscosity and high density. This paper analyzes gas foil journal bearings (GFJBs) with high Reynolds numbers and studies the effects of turbulent flows on the static and dynamic performance of bearings. For comparison purposes, air and R-134a gas lubricants are applied to the GFJBs. For the air lubricant, turbulence is dominant only at rotor speeds higher than 200 krpm. At those speeds, the journal eccentricity decreases, but the film thickness, power loss, and direct stiffness and damping coefficients increase. On the other hand, the R-134a gas lubricant, which that has much higher density than air, causes dominant turbulence at rotor speeds greater than 10 krpm. The turbulent flow model predicts decreased journal eccentricity but increased film thickness and power loss when compared with the lamina flow model predictions. The vertical direct stiffness and damping coefficients are lower at speeds below 100 krpm, but higher beyond that speeds for the turbulent model. The present results indicate that turbulent flow effects should be considered for accurate performance predictions of GFJBs with high Reynolds number.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.309-311
• /
• 2006

A train having a system which tilts the train body to reduce the lateral acceleration experienced by passengers when operating around curves, allowing the train to run at higher speeds through curves than non-tilting trains. A tilting train may have a maximum design service cant deficiency of up to $8^{\circ}$. In this case there is, at worst, a margin of only $6^{\circ}$ cant deficiency between a train travelling at enhanced permissible speed and its roll-over resistance. This is a significant reduction in the margin against overturning compared to that offered at permissible speeds. Particular consideration therefore needs to be given to the adequacy of the margin and the additional controls against overturning required when trains travel at enhanced permissible speeds. This paper deals with the speed supervision system of tilting train through curves.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.764-765
• /
• 2011

In this paper, rotordynamic analyses of the Campbell diagram, critical speeds, and harmonic responses for a TMP rotor system are performed. Since the finite element model of the TMP rotor system has a very large number of degrees of freedom because of its complex geometry, and dynamic analyses for investigating the critical speeds, stability, and harmonic response are repeated for various design parameters, model order reduction (MOR) is necessary to reduce the computational cost. The Krylov-based model order reduction via moment matching significantly speeds up the rotordynamic analyses for the TMP rotor system.