• 제목/요약/키워드: Design Requirement

검색결과 2,171건 처리시간 0.036초

바닥형과 현수형 환경 보조물이 육성돈의 행동에 미치는 영향 (Effects of floor type and hanging type environmental enrichment on the behavior of growing pigs)

  • 김두완;김영화;민예진;유동조;정용대
    • 한국산학기술학회논문지
    • /
    • 제18권11호
    • /
    • pp.282-289
    • /
    • 2017
  • 경제동물에 대한 동물복지에 대한 관심은 전세계적으로 고조되고 있는 추세이다. 그러나, 국내 양돈농가는 경제성 등을 이유로 고려하지 않거나 미비한 도입으로 돼지 본연의 행동이 제한되고 있다. 따라서, 본 연구의목적은 일반적인 사육환경에 환경보조물의 제공이 육성돈의 행동특성에 미치는 영향을 구명하고자 실시하였다. 실험동물은 45두의 3원 교잡육성돈(요크셔${\times}$랜드레이스${\times}$두록; 평균체중, $33.35{\pm}5.5kg$)을 준비하였고, 완전임의배치법(randomized complete block design)에 의해 3개 처리구(대조구; 현수형 환경보조물, T1; 바닥형 환경보조물, T2)에 처리구당 3반복, 반복당 5두씩 반슬러리 돈방에 배치하였다. 현수형 환경보조물은 돼지의 어깨 높이에 현수하였고, 바닥형은 돈방의 가운데에 고정시켰다. 시험기간은 14일간 수행하였으며 시험종료일에 스트레스호르몬인 코티졸(cortisol) 농도를 분석하였고 행동특성은 1과 8일차에 촬영하였고 베가스 프로(Vegas Pro) 13.0 프로그램을 활용하여 및 분석하였다. 체중 및 일당증체량은 대조구와 처리구들간 차이가 없었다. 코티졸호르몬은 T2(25.28 ng/mL)에서 대조구(46.75 ng/mL)보다 유의적으로 낮았다(p<0.05). 1일차 행동 유형별 지속시간은 움직임과 공격 항목에서 대조구에 비해 처리구에서 유의적으로 낮았다(p<0.01). 8일차 놀이행동 지속시간에서 처리구2는 925.12초로 T1의 323.91초 보다 유의적으로 높았다(p<0.01). 반면에 처리구들에 비해 대조구는 움직이지 않는 시간이 많았다(p<0.01). 이러한 결과는 환경보조물 제공이 돼지간 공격성을 감소시키고 돼지의 행동을 활동적으로 만들어 돼지 본연의 행동요구를 충족시킬 수 있음을 시사한다. 그러나, 국내에서 환경보조물에 대한 연구는 미흡하므로 본 연구결과는 보조물을 이용한 동물복지에 대한 기초자료로서 활용 가능할 것으로 사료된다.

수경 재배된 도마도(Lycopersicum esculentum Mill)에 의한 Cd의 흡수, 축적과 이에 미치는 Zn, Fe 및 인산의 효과 (Effects of Zinc, Phosphorus and Iron on the Cadmium Uptake and Accumulation by Hydroponically Grown Tomato)

  • 김명종;해리 엘 마토
    • Applied Biological Chemistry
    • /
    • 제21권1호
    • /
    • pp.40-50
    • /
    • 1978
  • Effects of Zn, P and Fe on Cd uptake and accumulations by tomato (Lycopersicum esculentum Mill) and also their interactions on the uptake of Zn, Fe, Mn, P and Cd were investigated using batch type solution culture technique. Experiment 1 was a factorial scheme with 3 levels of Zn (0, 0.5, 2.5 ppm) and 3 levels of Cd (0, 0.2, 1.0 ppm). At 1.0 ppm Cd, significant yield reduction of dry matter and visual toxicity symptoms (yellowing and necrosis) of Cd was observed for all zinc levels. At this Cd level, increasing Zn treatment from 0 to 2.5 ppm increased Cd concentration from 199 to 235 ppm in leaves and from 124 to 145 ppm in stems. Similarly, Cd treatment did not suppress Zn uptake in leaves, and rather significantly increased in stems. Fe concentrations in leaves and stems were significantly reduced due to Cd treatment while Mn were increased by both Zn and Cd treatment. The results of experiment 2 with 3 levels of P (0.5, 2.0, 4.0m Mol) and 3 levels of Cd (0, 1.0, 2.0 ppm) in a factorial scheme also showed a growth reduction and visual toxic symptons from 1.0 ppm Cd level. Increasing P treatment tend to increase Cd concentrations in leaves and stems although it was not statistically significant. Increasing P concentration due to Cd treatment could be the 'concentration' effect as a result of reduced growth, while there was significant decrease in Fe concentration due to Cd treatment in spite of possible 'concentration' effect. Mn concentration was increased at 1.0 ppm Cd level and then dropped at 2.0 ppm Cd level. Zu concentration in leaves and stems showed significant increase as Cd treatment increased as observed in experiment 1. Experiment 3 had 3 levels of Fe (0.5, 1.0, 2.0 ppm) and 3 levels of Cd (0, 0.8, 1.6 ppm) treatments in a factorial design. Significant growth reduction and visual toxic symptoms as observed in experiment 1 and 2 were also observed from 0.8 ppm Cd level. Increasing Fe treatment obviously alleviated toxic symptoms, improved growth and significantly increased dry matter yield. At 0.8 ppm Cd treatment level, increasing Fe treatment from 0.5 to 2.0 ppm significantly decreased Cd concentration from 141 to 92 ppm in leaves and from 101 to 46 ppm in stems. At 1.6 ppm Cd treatment level the decrease was from 224 to 167 ppm in leaves and from 124 to 109 ppm in stems. As in the case of experiment 1 and 2, Fe concentration in leaves and stems were reduced as Cd treatment increased to 1.6 ppm at 0.5 and 1. 0 Fe treatment levels, whereas at 2.0 ppm Fe level, Cd treatment increased Fe concentration in leaves and stems showing significant interactions of Fe and Cd on Fe uptake. Cd effect on Zn and Mn showed similar results to experiment 1 and 2 and Fe treatments reduced Zn and Mn concentrations in plant tissue. The results of 3 experiments show that P and Zn did not manifest suppressive effect on Cd uptake, Fe significantly demonstrated it. Fe also alleviated Cd toxicity symptoms significantly in terms of visual symptoms and dry matter yield. Visual toxicity symptoms were definitely related to Fe status in plant tissue as well as possible physiological effect of Cd itself, and the results suggest that Fe requirement for normal growth increase as Cd element is present in plant tissue. Zn accumulated more in stems than in leaves whereas Cd, Fe and Mn showed the opposite trend in all experiments.

  • PDF

업무성과에 영향을 주는 업무용 모바일 어플리케이션의 주요 요인에 관한 연구 (An Empirical Study on the Influencing Factors of Perceived Job Performance in the Context of Enterprise Mobile Applications)

  • 정성훈;김기민
    • Asia pacific journal of information systems
    • /
    • 제24권1호
    • /
    • pp.31-50
    • /
    • 2014
  • The ubiquitous accessibility of information through mobile devices has led to an increased mobility of workers from their fixed workplaces. Market researchers estimate that by 2016, 350 million workers will be using their smartphones for business purposes, and the use of smartphones will offer new business benefits. Enterprises are now adopting mobile technologies for numerous applications to increase their operational efficiency, improve their responsiveness and competitiveness, and cultivate their innovativeness. For these reasons, various organizational aspects concerning "mobile work" have received a great deal of recent attention. Moreover, many CIOs plan to allocate a considerable amount of their budgets mobile work environments. In particular, with the consumerization of information technology, enterprise mobile applications (EMA) have played a significant role in the explosive growth of mobile computing in the workplace, and even in improving sales for firms in this field. EMA can be defined as mobile technologies and role-based applications, as companies design them for specific roles and functions in organizations. Technically, EMA can be defined as business enterprise systems, including critical business functions that enable users to access enterprise systems via wireless mobile devices, such as smartphones or tablets. Specifically, EMA enables employees to have greater access to real-time information, and provides them with simple features and functionalities that are easy for them to complete specific tasks. While the impact of EMA on organizational workers' productivity has been given considerable attention in various literatures, relatively little research effort has been made to examine how EMA actually lead to users' job performance. In particular, we have a limited understanding of what the key antecedents are of such an EMA usage outcome. In this paper, we focus on employees' perceived job performance as the outcome of EMA use, which indicates the successful role of EMA with regard to employees' tasks. Thus, to develop a deeper understanding of the relationship among EMA, its environment, and employees' perceived job performance, we develop a comprehensive model that considers the perceived-fit between EMA and employees' tasks, satisfaction on EMA, and the organizational environment. With this model, we try to examine EMA to explain how job performance through EMA is revealed from both the task-technology fit for EMA and satisfaction on EMA, while also considering the antecedent factors for these constructs. The objectives of this study are to address the following research questions: (1) How can employees successfully manage EMA in order to enhance their perceived job performance? (2) What internal and/or external factors are important antecedents in increasing EMA users' satisfaction on MES and task-technology fit for EMA? (3) What are the impacts of organizational (e.g. organizational agility), and task-related antecedents (e.g., task mobility) on task-technology fit for EMA? (4) What are the impacts of internal (e.g., self-efficacy) and external antecedents (e.g., system reputation) for the habitual use of EMA? Based on a survey from 254 actual employees who use EMA in their workplace across industries, our results indicate that task-technology fit for EMA and satisfaction on EMA are positively associated with job performance. We also identify task mobility, organizational agility, and system accessibility that are found to be positively associated with task-technology fit for EMA. Further, we find that external factor, such as the reputation of EMA, and internal factor, such as self-efficacy for EMA that are found to be positively associated with the satisfaction of EMA. The present findings enable researchers and practitioners to understand the role of EMA, which facilitates organizational workers' efficient work processes, as well as the importance of task-technology fit for EMA. Our model provides a new set of antecedents and consequence variables for a TAM involving mobile applications. The research model also provides empirical evidence that EMA are important mobile services that positively influence individuals' performance. Our findings suggest that perceived organizational agility and task mobility do have a significant influence on task-technology fit for EMA usage through positive beliefs about EMA, that self-efficacy and system reputation can also influence individuals' satisfaction on EMA, and that these factors are important contingent factors for the impact of system satisfaction and perceived job performance. Our findings can help managers gauge the impact of EMA in terms of its contribution to job performance. Our results provide an explanation as to why many firms have recently adopted EMA for efficient business processes and productivity support. Our findings additionally suggest that the cognitive fit between task and technology can be an important requirement for the productivity support of EMA. Further, our study findings can help managers in formulating their strategies and building organizational culture that can affect employees perceived job performance. Managers, thus, can tailor their dependence on EMA as high or low, depending on their task's characteristics, to maximize the job performance in the workplace. Overall, this study strengthens our knowledge regarding the impact of mobile applications in organizational contexts, technology acceptance and the role of task characteristics. To conclude, we hope that our research inspires future studies exploring digital productivity in the workplace and/or taking the role of EMA into account for employee job performance.

축류(軸流) 콤바인의 개발(開發)에 관(關)한 기초(基礎) 연구(硏究)(I) -조선별장치(粗選別裝置)의 설계변수(設計變數)의 평가(評價)- (Fundamental Studies on the Development of Axial-Flow Combine(I) -Evaluation of the Design Parameters of Grain-Straw Separator-)

  • 이승규;김성태;최규홍
    • Journal of Biosystems Engineering
    • /
    • 제11권2호
    • /
    • pp.31-40
    • /
    • 1986
  • 우리 나라나 동남아(東南亞) 실정(實情)에 적합(適合)한 콤바인 개발(開發)에 관(關)한 기초(基礎) 자료(資料)를 얻기 위하여, 고정(固定)된 선별망(選別網) 속에서 로우터를 회전(回轉)시켜 짚 속에 섞여 있는 곡립(穀粒)을 선별(選別)할 수 있는 원뿔형과 원통형의 2 종(種)의 모형(模型) 축류(軸流) 조선별장치(粗選別裝置)를 제작(製作)하였다. 선별성능실험(選別性能實驗)을 통하여 여러 가지 설계변수(設計變數)가 선별특성(選別特性)에 미치는 영향(影響)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. (1)시작기(試作機)의 경사각(傾斜角)이 증가(增加)할수록, 또 선별실(選別室) 덮개 내표면(內表面)의 깃 피치가 감소(減少)할수록 곡립회수율(穀粒回收率)은 증가(增加)하고, 짚제거율(除去率)은 감소(減少)하였다. 선별망(選別網) 길이가 증가(增加)함에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 지수함수적(指數函數的)으로 증가(增加)하였으나, 짚제거율(除去率)은 감소(減少)하였고 교반판(攪拌板)은 없는 경우(境遇)가 유리(有利)하였다. (2)로우터 회전속도(回轉速度)의 증가(增加)에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 감소(減少)하였으나, 짚제거율(除去率)은 원통형과 원뿔형 시작기(試作機)가 서로 상반(相反)되는 경향(傾向)을 나타내었다. 또 공급속도(供給速度)의 증가(增加)에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 감소(減少)하였으며, 짚유량(流量)의 증가(增加)에 따라 모든 효율(效率)이 감소(減少)하였으나, 전유량(全流量)의 영향(影響)은 그다지 크지 않았다. (3)짚낟알비(比)가 곡립회수율((穀粒回收率)에 미치는 영향(影響)은 그다지 크지 않았으며, 짚낟알비(比)가 증가(增加)할수록 짚제거율(除去率)과 전효율(全效率)이 증가(增加)하였다. 품종별(品種別), 수분별(水分別) 곡립회수율(穀粒回收率)의 차이(差異)는 그다지 크지 않았으나, 키가 작은 삼강벼가 곡립회수율(穀粒回收率)과 전효율(全效率)이 약간 높게 나타났고 소요동력(所要動力)도 적었다. (4)두 시작기(試作機)는 작물조건(作物條件)에 따른 선별성능(選別性能)의 변동(變動)이 비교적(比較的) 작았고, 콤바인 조선별장치(粗選別裝置)로서의 활용가능성(活用可能性)이 인정(認定)되었다. 원뿔형 시작기(試作機)는 원통형에 비해 곡립회수율(穀粒回收率)은 낮았으나 소요동력(所要動力)이 적고 짚제거율(除去率)이 높아 전효율(全效率)은 약간(若干) 높았으나 실험조건(實驗條件)에 따른 변화(變化)가 크게 나타났다.

  • PDF

곡류 사료원별 육성기 한우 장내발효에 의한 메탄가스 배출량 비교 (Comparison of Methane Production in Korean Native Cattle (Hanwoo) Fed Different Grain Sources)

  • 설용주;김경훈;백열창;이상철;옥지운;이강연;홍성구;박규현;최창원;이성실;오영균
    • Journal of Animal Science and Technology
    • /
    • 제53권2호
    • /
    • pp.161-169
    • /
    • 2011
  • 본 연구는 거세 한우의 육성기 기간에 각각 보리와 옥수수 위주의 농후사료를 급여하여 발생되는 메탄가스를 측정하는데 그 목적이 있다. 공시 사료는 보리와 옥수수 위주의 농후사료 60%와 티모시 건초 40% 비율로 급여하였고 TDN 함량은 71.4%, CP는 14.6% 이었다. 시험은 Korean Feeding Standard for Hanwoo(2007)에 따라 각각 일당 증체량 0.7 kg/일에 필요한 각각의 TDN량 2.80 kg의 공시사료를 섭취할 수 있도록 하는 tripled 2 ${\times}$ 2 Latin square design으로 수행하였다. 사료 및 환경 적응기간 총 14일과 분 뇨 가스 측정기간 4일로 하여 진행하였고, 메탄가스는 후드식 챔버에서 입식되어 하루 동안 측정하였다. 건물 섭취량은 보리 처리구에서 3.9 kg, 옥수수 처리구는 3.8 kg으로 보리처리구가 유의적으로 섭취량이 높았다(P<0.05). 보리와 옥수수 위주의 사료를 급여했을 때 사료의 특성상 보리가 옥수수보다 반추위 내 정체 시간 및 소화속도에서 차이가 있었으나 DM, CF, NFE, NDF와 ADF 소화율의 차이는 없었다. 보리와 옥수수 급여구 섭취에너지는 대사체중 당 총에너지 섭취량은 각각 337.6 kcal/$BW^{0.75}$와 337.2 kcal/$BW^{0.75}$이었다. 총 섭취에너지 중 분으로 손실된 에너지는 보리 26.5%와 옥수수 29.6% 수준이었고, 뇨로 손실된 에너지는 보리 2.8%와 옥수수 2.3% 수준이었다. 체열에 의한 손실량도 보리와 옥수수 급여구 각각 32.4%와 34.0% 이었다. 보리와 옥수수 섭취에 따른 대사율(ME/GE)은 보리 0.64(ME/GE), 옥수수 0.62 (ME/GE) 이었다. 호흡가스에 의해 발생되는 산소, 이산화탄소와 메탄생성량은 보리위주 농후사료를 급여했을 때 산소 소모량 1.89 kg/day, 이산화탄소와 메탄 생성량은 2.71 kg/day와 86.8 g/day이고, 옥수수 위주의 농후사료를 급여했을 때의 산소 소모량 1.68 kg/day, 이산화탄소와 메탄 생성량은 2.23 kg/day와 77.7 g/day 이었다. 육성기에서는 보리위주 농후사료와 옥수수위주 농후사료를 급여하였을 때 산소 소모량이 거의 같았고, 보리위주의 농후사료를 급여하였을 때 이산화탄소와 메탄생성량이 각각 19.2%와 8.2% 높았다. 메탄배출계수는 보리와 옥수수 위주의 농후사료 급여 시 31.7 $CH_4\;head^{-1}\;yr^{-1}$과 28.4 kg $CH_4\;head^{-1}\;yr^{-1}$로 나타났다. 메탄전환계수는 섭취한 사료에 대한 에너지 손실율이 보리는 보리 급여구에서 6.5% (0.065 Ym) 이었고, 옥수수 급여구에서 5.5% (0.055 Ym)으로 나타났다. 본 연구는 후드식 챔버를 이용하여 급여사료와 급여 에너지 차이가 사양시기별 한우에 의해서 배출되는 메탄가스를 측정하여 메탄 배출계수와 메탄전환계수를 예측하여 국가 온실가스 인벤토리 작성에 그 목적이 있다.

선박 배연탈질용 금속 구조체 기반 촉매 제조를 위한 코팅슬러리 최적화 (Optimum Synthesis Conditions of Coating Slurry for Metallic Structured De-NOx Catalyst by Coating Process on Ship Exhaust Gas)

  • 정해영;김태용;임은미;임동하
    • 청정기술
    • /
    • 제24권2호
    • /
    • pp.127-134
    • /
    • 2018
  • 국제해사기구에서는 선박 배기가스 내 질소산화물($NO_x$) 배출에 대한 강화된 Tier III 규제가 2016년부터 적용됨에 따라 이를 대응하기 위한 노력이 필요하다. $NO_x$ 저감 방법으로 선택적 촉매 환원법(Selective catalytic reduction, SCR)을 주로 사용하고 있으며, 세라믹 허니컴 촉매를 주로 사용하고 있다. 그러나 기존의 세라믹 허니컴 촉매는 약한 강도로 인하여 운전상 문제가 발생하거나 유지 및 보수에 있어서도 어려움을 갖는 단점을 가지고 있다. 본 연구에서는 세라믹 허니컴 촉매의 단점들을 보완하기 위하여 높은 열적 안정성과 기계적 강도를 가짐과 동시에 배기가스의 다방향성 이동을 통한 낮은 배압효과 등의 장점을 가지는 금속 지지체를 적용하였다. 이러한 금속 지지체 상에 촉매를 담지하기 위하여 유 무기바인더 첨가를 통해 코팅슬러리를 제조하고, 이를 코팅, 건조 및 소성과정을 통해 금속 지지체 상에 견고하게 부착된 금속 지지체 기반 촉매를 제조하였다. 이러한 금속 지지체 기반 촉매는 $NO_x$ 성능평가와 초음파 및 낙하시험을 통한 접착 내구성 평가를 수행하였다. 특히, 무기바인더를 첨가한 MFC01경우 95% 이상의 $NO_x$ 전환율을 보였으며, 상용 세라믹 허니컴 촉매보다도 우수한 내구성을 보였다. 이러한 특성 및 성능평가를 통하여 개발된 금속 지지체 기반 촉매는 고효율, 고내구성을 가짐을 확인하였으며, 기존 세라믹 허니컴 촉매를 대체할 수 있는 선박용 배연탈질 촉매로서의 가능성을 확인하였다.

햄머밀의 햄머두께 및 폭(幅)이 분쇄성능(粉碎性能)에 미치는 영향(影響) (Study on the Effects of Hammer's Thickness and Width on the Grinding Performance of Hammer Mill)

  • 김성래;장동일;권순구
    • 농업과학연구
    • /
    • 제12권1호
    • /
    • pp.101-107
    • /
    • 1985
  • 사료(飼料)의 해외의존도(海外依存度)가 높은 우리나라의 축산경영농가(畜産經營農家)의 안정적(安定的) 발전방향(發展方向)은 사료(飼料)의 자급율(自給率)을 높이는 것이 매우 중요(重要)한 긴급과제(緊急課題)이다. 따라서 본(本) 연구(硏究)는 축산농가(畜産農家)에서 손쉽게 구(求)할 수 있는 보리와 건초(乾草)를 사용(使用)하여 사료(飼料)의 공급율(供給率)을 증가(增加)시키기 위(爲)한 대책(對策)의 하나로 현재(現在) 우리나라 농촌(農村)에 널리 보급(普及)되어 있는 3.7~7.5 kW 동력경운기(動力耕耘機)로 구동(驅動)이 가능(可能)한 소형사료분쇄기용(小形飼料粉碎機用) 햄머의 설계자료(設計資料)를 제공(提供)하고자 사료분쇄기(飼料粉碎機)의 적정회전수(適定回轉數)인 3,000rpm을 유지(維持)하면서 햄머의 폭(幅)은 20mm, 30mm, 40mm로, 두께를 2mm, 4mm, 6mm로 변화(變化)시키면서 성능실험(性能實驗)을 실시(實施)하였다. 공시재료(供試材料)는 보리와 건초(乾草)를 사용(使用)하고, 스크린은 구멍크기가 보리 4.76mm, 건초(乾草) 3.18mm인 것을 사용(使用)하여 분쇄성능실험(粉碎性能實驗)을 실시(實施)하여 분석(分析)한 결과(結果)는 다음과 같다. 1. 시료(試料)를 분쇄(粉碎)한 결과(結果), 입자(粒子)크기는 보리 478~774 micron, 건초(乾草) 350~434 micron으로 햄머의 두께와 폭(幅)이 증가(增加)함에 따라 감소(減少)하였다. 2. 분쇄물(粉碎物)의 조도계수(組度係數)는 보리 3.07~3.62. 건초(乾草) 2.69~2.93으로 햄머의 두께와 폭(幅)에 반비례(反比例)하였다. 3. 시료(試料) 분쇄시(粉碎時) 소요동력(所要動力)은 보리 3.8~5.0 kW, 건초(乾草) 0.9~1.4 kW로 햄머의 폭(幅)보다는 두께가 더 크게 영향(影響)을 미치는 것으로 분석(分析)되었다. 4. 소형사료분쇄기(小形飼料粉碎機)의 분쇄성능(粉碎性能)은 보리 99~170 kg/kW.h, 건초(乾草) 11~21 kg/kW.h이며, 햄머의 두께가 큰 영향(影響)을 마치는 인자(因子)로서 두께가 증가(增加)할 수록 분쇄성능(粉碎性能)은 감소(減少)하나 조도계수(粗度係數) 3.2 범위(範圍)에서는 두께 4mm가 가장 양호(良好)하였다. 햄머의 폭(幅)은 소형사료분쇄기용(小形飼料粉碎機用)으로는 30mm가 적정치(適正値)인 것으로 나타났다.

  • PDF

다목적실용위성탑재 전자광학카메라(EOC)의 성능 특성 (Characteristics of the Electro-Optical Camera(EOC))

  • Seunghoon Lee;Hyung-Sik Shim;Hong-Yul Paik
    • 대한원격탐사학회지
    • /
    • 제14권3호
    • /
    • pp.213-222
    • /
    • 1998
  • 1999년에 발사될 다목적실용위성1호의 주 탑재체인 전자광학카메라는 한반도의 디지털 지도(입체지도 포함) 작성을 위한 영상자료를 획득하는 것을 그 임무로 하고있다. 센서부와 전자부로 구성된 전자광학카메라는 파장 510∼730nm의 가시광선영역에서 6.6m의 지상해상도와 관측 폭 17km 이상의 흑백영상을 위성체 자세제어에 의한 조준과 푸쉬브룸 방식으로 촬영한다. 3년 이상의 임무수명을 가진 본 기기의 고해상도 흑백영상 촬영시간은, 98분인 위성궤도 당 2분간 연속 수집되어 그 지상영상의 길이는 800km에 이르며, 운용 중 프로그래밍이 가능한 이득률과 옵셋, 그리고 자체 내에 영상을 저장할 수 있는 기능을 갖고 있다. F수 8.3인 비차폐 3면 반사식 광학계에 의해 수집된 영상은 각각 8 bit 전자신호로 처리되어 25Mbps의 송신율을 가지고 지상국으로 보내진다. 제작된 전자광학카메라는 각종 시험을 통하여, 그 설계에서 요구되었던 기술사양을 만족하거나 능가할 정도로 높은 완성도를 보이고 있는데, 본 논문에서는 전자광학카메라로 획득된 영상자료의 최종 사용자들을 위하여 그 분광특성, MTF(Modulation Transfer function), 2592개 CCD 화소의 상대적 반응비등의 중요 성능특성 측정값을 설명하였다. 이득율을 변화시키며 측정한 분광특성 결과는 전자광학카메라의 영상자료 사용자가 더 정확한 흑백영상을 만드는데 이용되리라 본다. 영상품질을 가름하는 중요한 특성인 MTF는 시계각 전부에 걸쳐 Nyquist 진동수에서 측정값이 요구값 10%를 넘어 16% 이상을 보이므로써 이 전자광학카메라가 우수한 성능을 가진 것이 입증되었고, 각 CCD 화소들의 상대적 반응도를 측정한 결과에서도 상당히 고른 특성을 확인함과 함께, 차후 전자광학카메라의 영상자료 처리과정을 위하여 정밀한 상대 비교값을 제공하였다.

방임 및 보호 아동·청소년 원가정 회복지원 시범사업의 현황과 과제 (Recovery Support Service for Neglected Children and Their Families of Origin: Status and Suggestions)

  • 정지영;안진경;김은혜
    • 가족자원경영과 정책
    • /
    • 제25권3호
    • /
    • pp.87-102
    • /
    • 2021
  • 정부의 아동학대 대응체계가 전면 개편되고 있으나 최근에도 아동·청소년 대상의 학대와 방임은 계속 증가하고 있다. 학대 행위자의 75%가 부모라는 점은 재발 위험이 높을 가능성을 나타내며, 따라서 가해 부모에 대한 교육과 치료를 통한 가족 관계 및 양육환경의 개선 및 가족기능회복이 시급하다. 본 연구의 목적은 방임 및 보호 아동·청소년과 부모의 지속적인 관계 개선을 통해 원가정의 건강성 회복을 도모하는 시범사업의 현황 및 실태 분석을 통해 지역사회 기반의 원가정 기능회복지원 사업의 확대 및 개선 방안을 제시하고자 이루어졌다. 시범사업은 2020년 6월부터 11월까지 진행되었으며, 지역에 따라 코로나-19의 확산 및 사업운영 인력의 개인역량, 타 가족사업과의 협력, 지역 자원 활용 정도 등에 따라 서비스 제공 정도에 차이가 있었다. 그럼에도 원가정 회복지원 서비스 제공과정이 보다 체계화 되었고, 학대 재발 방지를 위한 지역사회 네트워크 기반이 형성되었다. 이에 원가정 회복지원 사업이 보다 확대되기 위해서 첫째, 기존 아동 학대 보호 기관과의 서비스 제공을 위한 범정부적 협업 시스템이 마련되어야 하며, 둘째, 원가정 대상자 발굴을 위한 지역별 사례 발굴 경로가 다양하게 구축되어야 한다. 셋째, 시범사업 운영기관의 노하우를 타 지역 센터와 공유함으로써 동반성장 체계를 마련하여 안정적인 사업운영 체제가 조성되어야 한다. 마지막으로 지역 내 기존 보호 아동 기관과의 서비스 중복을 피하기 위해 예방이나 재발 방지 차원에서 '원가정 보호' 및 모니터링에 집중할 필요가 있다. 이를 토대로 지역별 특색을 살리며 서비스 표준화를 모색할 수 있는 운영지침과 성과평가 방안이 마련되어야 할 것이다.

Effects of Storytelling in Advertising on Consumers' Empathy

  • Park, Myungjin;Lee, Doo-Hee
    • Asia Marketing Journal
    • /
    • 제15권4호
    • /
    • pp.103-129
    • /
    • 2014
  • Differentiated positioning becomes increasingly difficult when brand salience weakens. Also, the daily increase in new media use and information load has led to a social climate that regards advertising stimuli as spamming. For these reasons, the focus of advertisement-related communication is shifting from persuading consumers through the direct delivery of information to an emphasis on appealing to their emotions using matching stimuli to enhance persuasion effects. Recently, both academia and industry have increasingly shown an interest in storytelling methods that can generate positive emotional responses and attitude changes by arousing consumers' narrative processing. The purpose of storytelling is to elicit consumers' emotional experience to meet the objectives of advertisement producers. Therefore, the most important requirement for storytelling in advertising is that it evokes consumers' sympathy for the main character in the advertisement. This does not involve advertisements directly persuading consumers, but rather, consumers themselves finding an answer through the advertisement's story. Thus, consumers have an indirect experience regarding the product features and usage through empathy with the advertisement's main character. In this study, we took the results of a precedent study as the starting point, according to which consumers' emotional response can be altered depending on the storytelling methods adopted for storytelling ads. Previous studies have reported that drama-type and vignette-type storytelling methods have a considerably different impact on the emotional responses of advertising audiences, due to their different structural characteristics. Thus, this study aims to verify that emotional response aroused by different types of advertisement storytelling (drama ads vs. vignette ads) can be controlled by the socio-psychological gender difference of advertising audiences and that the interaction effects between the socio-psychological gender differences of the audience and the gender stereotype of emotions to which advertisements appeal can exert an influence on emotional responses to types of storytelling in advertising. To achieve this, an experiment was conducted employing a between-group design consisting of 2 (storytelling type: drama ads vs. vignette ads) × 2 (socio-psychological gender of the audience: masculinity vs. femininity) × 2 (advertising appeal emotion type: male stereotype emotion vs. female stereotype emotion). The experiment revealed that the femininity group displayed a strong and consistent empathy for drama ads regardless of whether the ads appealed to masculine or feminine emotions, whereas the masculinity group displayed a stronger empathy for drama ads appealing to the emotional types matching its own gender as well as for vignette ads. The theoretical contribution of this study is significant in that it sheds light on the controllability of the audiences' emotional responses to advertisement storytelling depending on their socio-psychological gender and gender stereotype of emotions appealed to through advertising. Specifically, its considerable practical contribution consists in easing unnecessary creative constraints by comprehensively analyzing essential advertising strategic factors such as the target consumers' gender and the objective of the advertisement, in contrast to the oversimplified view of previous studies that considered emotional responses to storytelling ads were determined by the different types of production techniques used. This study revealed that emotional response to advertisement storytelling varies depending on the target gender of and emotion type appealed to by the advertisement. This suggests that an understanding of the targeted gender is necessary prior to producing an advertisement and that in deciding on an advertisement storytelling type, strategic attention should be directed to the advertisement's appeal concept or emotion type. Thus, it is safe to use drama-type storytelling that expresses masculine emotions (ex. fun, happy, encouraged) when the advertisement target, like Bacchus, includes both men and women. For brands and advertisements targeting only women (ex. female clothes), it is more effective to use a drama-type storytelling method that expresses feminine emotions (lovely, romantic, sad). The drama method can be still more effective than the vignette when women are the main target and a masculine concept-based creative is to be produced. However, when male consumers are targeted and the brand concept or advertisement concept is focused on feminine emotions (ex. romantic), vignette ads can more effectively induce empathy than drama ads.

  • PDF