• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 춘계학술대회 논문집
• /
• pp.90-93
• /
• 2003

This study aims to validate the effectiveness of VE system with an arm-master in the evaluation of virtual prototype. A virtual kitchen with a refrigerator was presented in a CAVE system. Subjects put in and pull out virtual objects by using the arm-master. Twelve subjects participated in six experimental conditions: three types of refrigerator door grips and two reaction forces. After each trial, subjects evaluated a virtual refrigerator in terms of easiness of operation, similarity in force, presence etc. The results show the subjects preferred vertical grip than horizontal grip and light reaction force than heavy one. The VE system with the arm-master will be very helpful in the design evaluation of virtual prototypes.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.146-152
• /
• 2007

Presented in the paper is an algorithm to generate a section curve by slicing a point cloud which may include tens of thousands of points. Although there are couple of previous results, they are very sensitive on the density variations and local noising points. In the paper, three technological requirements are identified; 1) dominant point sampling, 2) avoiding local vibration, and 3) robustness on the density changes. To satisfy these requirements, we propose a new slicing algorithm which is based on a node-circle diagram. The algorithm has been implemented and tested with various examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.303-306
• /
• 2001

To shorten the delivery time for new products, a lot of prototype plastic parts manufacturing technologies have been developed including injection molding, vacuum casting, thermal forming and so on. Among them, RIM is becoming one of a important soft tooling methods to produce prototype and mass production parts within short time. Further more, as the rapid prototyping technology based tooling methods are playing an important role in prototype manufacturing industry, the utility of the RIM is increasing. But few analyses and mold design techniques have been developed so far due to its chemical and mechanical complexity during the packing and curing process. This research suggests mold gate design criteria to prevent bobbles from molded parts through simplified mathematical model and change of bubble sizes according to the geometry of the molded parts through experiments. Also this study shows the differences of bobble generation mechanism between RIM and injection molding.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.843-849
• /
• 2007

최근 급속히 발전하고 있는 소프트웨어 엔지니어링, 특히 객체 지향 설계 개념은 위성 컴포넌트의 시뮬레이션 모델을 신뢰성과 재사용성의 측면에서의 발전이 가능하게 하였다. 이 논문은 시뮬레이션 서비스와 일반화된 모델 설계 방법에 기초한 유용한 위성 시뮬레이터 구조를 제안한다. 제안된 기법의 유용성은 .NET/C# 환경에서의 프로토타이핑을 통해 검증되었다.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.47-52
• /
• 2001

Rapid Prototyping(RP) has been widely applied in designing and developing process of new products. RP can reduce the lead time and expense required to bring a new product form initial concept to production. Among several RP process can dramatically reduce the total build time and be applied for fabrication of large-sized and free form object because it uses in LOM the paper thickness is 0.05∼0.38mm as deposition feature segment. In this study, mechanical properties of pattern with LOM system is studied for optimal design of sand mold casting. The main result is that tensile, compressive strength and pattern size are significantly affected by temperature of hot roll.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1917-1922
• /
• 2010

Near-Field Communication (NFC) is a short-range wireless communication technology evolved from RFID especially for the exchange of data between active and passive devices. This paper presents the mathematical models for the signal path of a NFC transceiver system and a behavioral simulation platform using MATLAB simulink. The approximated mathematical models simplify the simulation complexity of a transceiver and provide a quick evaluation. With this calculation platform, we can evaluate the system performance caused by the noise and the non-linearity of the individual blocks, and caused by system variables such as Effective Number of Bits (ENOB) of ADC and filter cutoff frequency. This platform provides us with a rapid prototyping, a reliable system design, and an efficient risk management during development of the NFC transceiver ICs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.281-284
• /
• 2004

In this paper, a verification method and model for a PCI-Express device are described. PCI-Express technology is one of new I/O interconnection technologies which is intended to replace conventional PCI based technology, and is introduced by PCI-SIG in 2002. For a fast prototyping, a verification suite which includes a behavioral model and stimuli is needed before actual design is finished. And also it should be simple in structure and accurate enough to verify the design. In this paper, an Early Verification Suite (EVS) which complies with PCI-Express protocol is developed and tested.

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.15-21
• /
• 1998

Several adaptive and direct slicing methods have been developed to make the slice data for RP parts with better accuracy and speed. This research deals with a new adaptive slicing algorithm that shows drastic improvement in computing time for calculating the slices of a part. First, it uses less number of sampling points fur each slice in determining the thickness of the next slice. Secondly, the idea of contour map is utilized to determine the optimal sampling point on each slice. Thirdly, the calculation efficiency is further improved by introducing vertical character lines of the given part. The results in terms of accuracy and speed are compared with the existing methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.203-204
• /
• 2019

Recently, exposed concrete designs have been placed everywhere due to increased interest in indoor residential environments. In addition, in order to overcome the disadvantages of litracon, which was developed by mixing optical fiber, LEFC(Light Emotion Friendly Concrete) was developed in Korea, which improved unit price and constructivity by inserting hard acrylic rods. LEFC, using foaming agent and lightweight aggregate for light weighting, has disadvantages that decrease mechanical properties, and thus improved mechanical properties by using ultra-high performance concrete. Also, due to the characteristics of UHPC materials, it showed excellent self-consolidating performance. Considering these characteristics, a LEFC mold with pattern design was developed. The LEFC blocks were built so that pattern shapes could be seen and these were applied on-site to Sewoon plaza, located in Seoul.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.83-86
• /
• 2015

Taking the four-wheel bogie landing gear as an example, the force status of truck-like landing gear during the landing impact was analyzed and the simulation model of four-wheel bogie landing gear was established. Firstly, a landing gear prototyping model was established using CATIA and imported to LMS Virtual.lab. Secondly, dynamic analysis of the landing impact was simulated with the established model. Finally, with the help of LMS Virtual.lab's parametric design ability, the effects of landing approach and truck pitch angle on the landing performance, truck motion and truck beam strength were studied. These conclusions will be useful to the design and analysis of the truck.