• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.299-309
• /
• 2006

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• 한국노년학
• /
• v.29 no.2
• /
• pp.513-527
• /
• 2009

The purpose of this study was to verify the effect of senior simulation on geriatric unit nurses' attitude and job satisfaction toward the elderly with one group pretest-posttest design. The subjects of this study were the 30 nurses who are working in geriatric units in a general hospital in Daegu, Korea and who were well informed about the purpose of this study and allowed to join the study. The data were collected from August 23 to September 6, 2006. The experimental procedure was to do activities for daily living for 45 minutes wearing senior simulation suit. Self administered questionnaires were used to ask the nurses' attitude toward the elderly and job satisfaction in their work before, right after, and one week after senior simulation. According to the results of this study, there were significant changes in the geriatric nurses' attitude toward the elderly and job satisfaction after aging simulation implying that senior simulation is an effective intervention to facilitate nurses to do quality care for the elderly with sympathetic understanding and attitude. Senior simulation needs to be applied to geriatric education for the nursing students and health care providers who are involved in care for the elderly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.70-78
• /
• 2023

The ordinary concentrically braced frame has an advantage of having simple design procedure. For this reason, it has been widely used for the small-sized frame structures subject to moderate or lower magnitude earthquake, even though its seismic performance against the earthquake load is not much effective compared to that of other frame systems. To enhance seismic performance of the ordinary concentrically braced frame where the bracing has a weakness for compressive behavior under lateral earthquake, seismic retrofitting by viscous damper has been commonly introduced. However, the viscous damper, itself, generally does not have stiffness for restoring the structure to the original position. This may cause residual displacement to the structure. In this paper, a self-centering viscous damper system in which upper and lower beams having flexural rigidity play a role as a nonlinear-elastic spring, restoring the spring-damper system subject to external displacement history to its original location, is developed. The numerical analysis for a simplified frame structure shows how including the developed self-centering viscous damper system leads to an enhanced seismic performance of the frame structure through energy dissipation during earthquake excitation.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1143-1149
• /
• 2023

The purpose of this study was to the effects of case-based learning (CBL) on problem solving ability and academic self-efficacy in nursing students and was a quasi-experimental study with a one-group pretest-posttest design. The subjects of this study were 121 grade 4 students, and the data collection period was from Aprill 24 to June 12, 2023. The research procedure was scenario development, preliminary investigation, application of case-based learning classes, and follow-up investigation, and the CBL was conducted for 2 weeks, 50 minutes per week. The general characteristics of the subjects were obtained by frequency, percentage, mean, and standard deviation and the effects of CBL on problem solving ability and academic self-efficacy was tested using a paired t-test. The results of this study showed that nursing students' problem solving ability (t=-5.70, p<.001) and academic self-efficacy (t=-3.25, p<.002) improved after applying CBL compared to before applying it. We suggest the use of case-based learning as a strategy to improve problem-solving skills and academic self-efficacy in nursing education. In the future, follow-up research is needed to verify the effectiveness by developing and applying step-by-step clinical cases at an appropriate level according to the learning content of nursing major subjects by grade.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.85-93
• /
• 2024

In this paper, we propose a method for establishing a state-space equation model for the motion analysis of floating structures subjected to wave loads, by applying system-identification techniques. Traditionally, the motion of floating structures has been analyzed in the time domain by integrating the Cummins equation over time, which utilizes a convolution integral term to account for the effects of the retardation function. State-space equation models have been studied as a way to efficiently solve floating-motion equations in the time domain. The proposed approach outlines a procedure to derive the target transfer function for the load-displacement input/output relationship in the frequency domain and subsequently determine the state-space equation that closely approximates it. To obtain the state-space equation, the method employs the N4SID system-identification method and an optimization approach that treats the coefficients of the numerator and denominator polynomials as design variables. To illustrate the effectiveness of the proposed method, we applied it to the analysis of a single-degree-of-freedom model and the motion of a six-degree-of-freedom barge. Our findings demonstrate that the presented state-space equation model aligns well with the existing analysis results in both the frequency and time domains. Notably, the method ensures computational accuracy in the time-domain analysis while significantly reducing the calculation time.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2019

The purpose of this study is to examine the design ＆ construction methods of the traditional landscape space of the past and the repair and maintenance of cultural heritages to maintain it today. To this end, the method of narrative description, process extraction and construction related to traditional landscaping were compared to each other based on the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages'. The results are as follows; First, to analyze at the description methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages' and related processes in the field of traditional landscaping. 『Imwongyeongjeji』 「Seomyongji」 was an encyclopedia of the overall construction method of the living space, describing the location, effect, and advantages and disadvantages of each component and presenting quantitative figures to institutionalize the construction of traditional landscaping spaces. 'Standard Specification for Repairing Cultural Heritages' presented the entire process of repairing cultural heritages, and it is becoming a kind of guide for reference at the site. Among them, foundation construction, roof construction, landscape construction, and fence construction were drawn as items that could be applied to traditional landscaping areas. Second, the traditional landscape space construction method was divided into the processes of foundation construction, roof construction, landscaping construction, and fence construction. Foundation construction is a way of repeating the process of land-tramping. During the construction of the roof, the tile-roofed building was built on top of the rafters and roofed with tiles. And thatched roof was made to a number of rice straws bundles to cover the roof one after the other. Instead of tiles, the stone roof was made of thin and wide stones, and the wooden boards were used for the single roof and the bark roof were constructed with many layers of dried corrugations. Landscape construction mainly consists of the Paving technique through tramping rubble and the construction of terraced flower by planting stone, plants, and shrubs on the top. According to the building materials, the wall construction was derived from the earth-stacked earthen wall, stone walls using stone and clay, marble walls made of tile patterns, and the construction of a board wall using a wood board as a wall. Third, comparing the construction methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages', 『Imwongyeongjeji』 「Seomyongji」 focuses on standardizing the construction methods to create a new traditional space. There is a difference in the setting of the scope of the 『Imwongyeongjeji』 「Seomyongji」 and the construction because 'Standard Specification for Repairing Cultural Heritages' provides the overall construction procedure considering the diversity of the cultural heritages. In addition, the traditional landscape space used to be a residential space in the past, but today, the maintenance process of the already established facilities as designated cultural heritages has been carried out, and construction methods have been added to create viewing conditions. In terms of the succession of traditional knowledge, some similar methods were found in the repair of cultural assets today, and some cases were also confirmed in the reconstruction of traditional technologies such as application of some materials or mix, separation of added facilities and introduction of efficient construction methods.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.2
• /
• pp.99-117
• /
• 2020

Objective : The purpose of this study was to study the effects of occupation-based community rehabilitation on occupational performance skills and activities of daily living in stroke disabled persons living in the community, and to investigate the changes in occupation quality and satisfaction. Methods : In this single-subject ABA design study with follow-up evaluation, one severely disabled person diagnosed with stroke who lived in the community was recruited. The procedure consisted of a total of 25 sessions for 17 weeks. Intervention was according to occupation-based community rehabilitation, and the researcher visited the subject's home. Individualized intervention was applied according to the OTIPM. The intervention was composed of task assignment and feedback, home environment modification, information-related caregiver education, and community resource network. The evaluation of each session included the changes in the frequency of occupational performance skills, the quality of occupational performance in daily life, and the changes in occupational satisfaction, activities of daily living, quality of life, and maintenance of in the occupational performance skills during follow-up. The results were visually analyzed using a bar graph and a linear graph. Results : The results showed that the occupation-based community rehabilitation improved activities of daily living such as putting on socks, shoes slip-on, and upper body dressing garment within reach. Within the framework of the AMPS, it was confirmed that the quality of occupational performance was improved in all the subjects, and the degree of satisfaction also improved. Conclusion : This study showed that occupation-based rehabilitation can improve the occupational performance skills of stroke home disabled people positively affect the quality of occupational performance in daily life. Therefore, I think it is meaningful that useful for them.

• Journal of the Korean Society for Library and Information Science
• /
• v.7
• /
• pp.89-195
• /
• 1980

The advanced developing countries including Korea are assumed to have reached a developmental stage which necessitates them to formulate and implement a plan for a national information network. Most of the governments in the advanced developing countries are well aware of the necessity for such a plan and some of them have actually commenced their studies on the feasibility of a national network of their own hoping to achieve maximum utility of their limited information resources. Two urgent problems facing planners in the design of a national information network are identified. One is lack of an optimum organisational model to enable them to meet their own situations, and the other is lack of a guideline to help designers evaluate the alternative structures and models when they are available. In resolving these two problems, network planners in the advanced developing countries would benefit from the achievement of the objectives of the present study. The major objective is to elicit and describe common information needs, desires and value of the people using information, and other common factors which are responsible for the present information services in the advanced developing countries and which have implications for the basic structure of the national information network. The value of this study is to aid administrators in Korea and those in the other advanced developing countries who are responsible for making national policies and who are now beginning to recognise the need for information services with the planning of economic and social development so as to enable all the groups in the community to have access to the information which are essential for decision making, research work, studies and even for recreational reading. This recognition will hopefully give them a rational basis for formulating right policies on information services. The methodology utlised for collecting the required data in this study falls under the category of observation and largely consists of the two techniques: literature review and postal questionnaire. Background information on the individual advanced developing: countries was gathered from monographic and periodical literature. and country reports presented at the various international conferences were analysed for other relevant data. For most of the data needed for the present study, a questionnaire on 'Library and Information Services as They Are Available in the Selected Countries' was formulated. This questionnaire was designed to be completed without help, by an expert who was well informed of the library and information services in his or her country. The questionnaire was intended to look in details at what information services in the advanced developing countries were doing-whom they were serving, in what way, and how well and establish to what extent they were meeting the nation's information requirements. It was also intended to ascertain the respondents' ideas on possible future developments in information provision in their countries, that is, in the advanced devanced developing countries. The questionnaire was posted to a total of 63 natinal librarians, directors of national information centres and those of other major libraries or information centres in 21 selected countries. Complete usable responses were received from 34 persons in 14 countries. In order to identify common characteristics of the information needs and desires in the advanced developing countries and the present situation of the information services to meet them, and the requirements and constraints peculiar to those countries which bought to be considered in the design of a national information network for advanced developing countries, an individual report on the current status of information activities for each of the fourteen countries chosen for this study, was presented. The procedure used was to arrange the data acquired in the questionnaire responses and other sources, in the form of fifteen country reports to be summarised by cross-section characteristics later.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.1-13
• /
• 2018

Landscape Architecture is a minority manpower field that requires wide knowledge and experience. Therefore, the service market is narrower than other fields, and education service for practitioners is lacking. The purpose of this study is to propose e-learning content development methodology that can provide customized landscaping practical education according to the level of education and increase the economic efficiency of the development process. First, in theoretical review, the ADDIE model was modified to select the curriculum development model that pursues efficiency and introduced the concept of reusing learning objects in the SCORM-based model. In particular, to overcome the problems presented in the precious studies, the analysis and design stages have been strengthened and faculty designers with integrated knowledge of Landscape Architecture and ICT have led the overall phase. The actual development process is based on a step by step procedure--analysis of landscaping practitioners needs and environments, etc., teaching and learning procedures and the design of activities considering contents reuse, the first development such as actual shooting and editing, and the second development reusing the first development content--and was done in the order of evaluation and revision of professionalism and satisfaction. As a result of the study, the space-based courses composed of modular learning objects were first developed as 216 courses in 8 subjects, as 208 courses in 3 subjects in total, in which the modularized learning object are crossed and combined in units and difficulty-based courses were second developed in 216 courses with 3 subjects in total. As a result of the evaluation the satisfaction assessment of the overall satisfaction was 4.20 and the average value of the eight measures was 3.97, both being close to 4.0. For the professional assessment, the scores of 8 subjects were very high at 84.8 to 96.4 points. in context, the scores of 5 subjects were equal to from 89.9 to 96.4 points. In conclusion, as the study was conducted based on a clear understanding of the digital characteristics of e-learning contents and general characteristic of the landscaping industry, it was possible to develop a curriculum by developing a course composed of modular learning objects and reusing learning objects by unit. In particular, it has been proven to be effective in conveying professional knowledge and experiences via general procedures and provided an opportunity to overcome some analog problems that may occur in offline education. In the future, further studies need to be done by expanding the content and by focusing on segmented subjects.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.158-176
• /
• 2018

The purpose of this study is to analyze the satisfaction of the manufacturing process and the satisfaction of manufacturing lesson in the lesson of model product manufacturing based on IoT(Internet of Things) for pre-service technology teachers. and we also analyzed 'smart farm' model production manufacturing among various products. The survey questionnaires with 8 questions to investigate satisfaction level of model manufacturing process, difficulties in manufacturing, and the satisfaction level of manufacturing lesson were collected from the 15 pre-service technology teachers and analyzed by using SPSS program. and The results of this study were as follows: First, the lesson satisfaction average level of pre-service technology teachers was high(M=4.22) in model product manufacturing process for the 'smart farm' model making based on the IoT. Second, the average satisfaction level of 'patent search and prior art search report writing education' was as high as 4.07. Therefore, the application of 'prior art search report writing education' showed that it helped to make the product. Third, the best high satisfaction level in the model production manufacturing procedure was 'education of inventive thinking method'(M=4.40). Therefore, the pre-service technology teachers showed that the 'education of inventive thinking methods' was very helpful from the idea design to the optimal selection of idea. The next order of satisfaction level was high(M=4.33) in 'design education and counseling' and 'guidance through selection of professor who guide the production manufacturing in addition to professors who are in charge of lesson'. Because they were helpful in solving the lack of knowledge of pre-service technology teachers. Fourth, satisfaction level with 'the presentation of model making results and exhibitions', 'presentations and participations of external event' was high (M = 4.13). Although the results of interviews with pre-service technology teachers showed that they suffered from lack of knowledge in various technologies, but it was an opportunity to learn things and felt a sense of accomplishment.