• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.29-36
• /
• 1999

The objective of this study is to analyse the flow field in the branching duct by visualizing the flow phenomena using the PIV system. A bifurcation model is fabricated with transparent acrylic resin to visualize the whole flow field with the PIV system. Water was used as the working fluid and the conifer powder as the tracer particles. The single-frame and two-frame methods of the PIV system and 2-frame of the grey level correlation method are applied to obtain the velocity vectors from the images captured in the flow filed. The velocity distributions in a lid-driven cavity flow are compared with the so-called standard experimental data, which was obtained from by 4-frame method in order to validate experimental results of the PIV measurements. The flow patterns of a Newtonian fluid in a branching duct were successfully visualized by using the PIV system and the sub-pixel and the area interpolation method were used to obtain the final velocity vectors. The velocity vectors obtained from the PIV system are in good agreement with the numerical results of the 3-dimensional branch flow. The results of numerical analyses and the PIV experiments for the three-dimensional flows in the branch ing duct show the recirculation zone distal to the branching point and the sizes of the recirculation length and height of the tow different methods are in good agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.597-604
• /
• 2016

The aim of this study was to prevent the decrease in crop output by disease and insect pests and excessive spraying of agricultural pesticides by application uniformity. A 3m height and 15km/h speed is difficult to maintain with an unmanned helicopter for aerial application, which has been affected by the controlling habits and methods or environmental factors, such as changes in the wind. Therefore, in this study, an aerial application system was design to be attached to an unmanned helicopter, which can allow a controlled application width and spray rate automatically and verified experimentally using Rmax of MS-AVIATION. The size of agricultural land was 50 m2 and nine water sensitive cards were arranged at 1.25m intervals in 5 rows with each row having a 10m interval from the position of 5m. The unmanned helicopter was flying at speeds ranging from 7.2km/h to 17.6km/h and heights ranging from 2.32m to 3.47m. The proposed aerial application system allowed application uniformity by making a valid spraying area of 7.5 m2 with 46423 particles distributed on average.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.198-208
• /
• 2011

When a structure which has relatively low load constructs on soft clay, the bearing capacity of the ground will be improved by sand overlying clay. In this condition, verifying the bearing capacity is difficult from the P.B.T etcetera in the in-situ. So, it is needed to estimate precise bearing capacity in the design process. In this study, 2-dimensional chamber tests and FEM analyses are conducted to evaluate behavior of bearing capacity for shallow foundations on a sand overlying clay. Because depth ratio H/B and bearing capacity ratio $q_c/q_s$ are selected as main factors, height of a sand, undrained shear strength of a clay and width of a loading are designated as variables. Results from chamber tests are very similar with those of FEM analyses. And it shows that punching shear mechanism is more suitable than the equation of Okamura et al.(1998). To make continual application of load spread mechanism, the equivalent load spread angle is proposed for H/B and $q_c/q_s$. Also, the linear regression equation of critical depth ratio Hf is suggested for $q_c/q_s$.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.385-391
• /
• 1997

An objection of this study is to develop a measuring circuit of a gauge using radioisotope for compaction control. The gauge developed in this study makes use of radioisotope with the activity exempted from domestic atomic law and consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and two circuits are provided for gamma-rays and thermal neutrons, respectively. Being simple in electrical characteristics of G-M detector for gamma-rays, pulses are counted through only a shaping circuit. Very small pulses generated from He- 3 proportional detector for thermal neutrons are amplified to the maximum of 50 [dB] and a window comparator accepts only pulses with meaning. To minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration. One-chip microprocessor is applied to process various counts, results are stored and the gauage is made capable to communicate with PC. Enough and meaningful numbers of pulses are counted with the prototype gauage for compaction control.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.122-130
• /
• 2016

The past few decades of industrialization enabled human-centered stream developments, which in turn resulted in constructing straight or covered streams, which are used only for sewage disposal purpose. However, these types of streams have become the cause of flood damages such as localized heavy rain. In response, various construction methods have been implemented to prevent stream and embankment damages. However, regulations regarding these measures only lay out minimum standards such as the height of slopes and the minimum angle of inclination. Moreover, examination of tractive force, the most crucial factor in preventing flood damage, is nonexistent. Therefore, this study evaluates various tractive forces by implementing a porous concrete tetrapod at a full scale artificial stream for experiment, controlling the rate of inflow, and measuring the velocity and depth of the stream under different experiment conditions. The test results of the compressive strength, and porosity and density of rock of the porous concrete tetrapod was between 16.6 and 23.2 MPa, and the actual measurement of air void was 10.1%, thus satisfying domestic standard. The result of tractive force experiment showed a limiting tractive force of $47.202N/m^2$, not satisfying the tractive force scope of $67N/m^2$ the stream design working expertise proposes. However, there was neither damage nor loss of blocks and hardpan. Based on previous researches, it can be expected that there will be resistance against a stronger tractive force. Therefore, it is necessary to conduct another experiment on practical limiting tractive force by adjusting some experimental conditions.

• Journal of Korean Institute of Fire Investigation
• /
• v.6 no.1
• /
• pp.49-66
• /
• 2005

The purpose of this study is to present reference data to be considered in designing fur the fire safety of atrium buildings. This study deals with the characteristics of atrium buildings in the fire safety aspect, analysis of fire examples and foreign fire codes of atrium space. And con-crete factors to be consigning fur the fire facilities of atrium buildings are presented. Recently many atrium spaces have been built in Korea. They provide new experience of space with resident and pedestrians. However, because of the lack of knowledge in design principle and disaster prevention, large loss of lives is expected in an emergency situation. cion. Therefore safety ensuring from the case is urgently needed. The following is the summary on the standard of effective fire facilities for the atrium. 1. The smoke control. inside atrium must use the machine ventilation in the atrium. 2. It is desirable to divide the section between atrium and nearby living room by anti-smoke screen in order to prevent damage by smoke when fire break out. 3. It is desirable to instill an excellent fire detector like infrared light detector as a replacement of old one. 4. It is desirable to transfer from closed operating sprinkler to fire-cycle sprinkler equipment or ablative sprinkler when the height is lower than 20m.

• The Journal of Engineering Research
• /
• v.1 no.1
• /
• pp.5-14
• /
• 1997

The purpose of thesis is to analyze the radiation characteristics of an offset gregorian antenna in order to design the satellite-loaded antenna. In order to compute the radiation pattern of the sub-reflector, the reflected wave is obtained by GO(Geometric Optics) at an arbitrary shaped sub-reflector. Then the total radiation EM wave is obtained by summing the diffracted fields obtained by UTD(Uniform Geometrical Theory of Diffraction) and the GO fields. In order to calculate the far field radiation pattern of the main reflector, the radiation integral equation is derived from the induced current density on reflector surface using PO(Physical Optics). The kernel is expanded in terms of Jacobi-Bessel series for increasing the computational efficiency, then the modified radiation integral is represented as the double integral equation independent of observation points. When the incident fields are assumed to be x-or y-polarized field, the characteristics of radiation patterns in the gregorian antenna is analyzed in case of the main reflector having the focal length of 62.4$\lambda$, diameter of 100$\lambda$, and offset height of 75$\lambda$, and the sub-reflector having the eccentricity of 0.501, the inter focal length og 32.8$\lambda$, the horn axis angle of $9^{\circ}$ and the half aperture angle of $15.89^{\circ}$. The cross-polarized level and side lobe level in the offset geogorian reflector are reduced by 30dB and 10dB, respectively, in comparison with those of the offset parabolic antenna.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.218-221
• /
• 2005

The present study was investigated in the Chittagong hill forest of Bangladesh to assess the feasibility of ginger cultivation under multipurpose forest and fruit tree species. There were three treatments such as i) ginger grown under open field condition, ie. full sunlight (T1), ii) ginger grown under Gamar tree (spacing of $90{\times}90cm$ (T2) and iii) ginger grown under guava tree (spacing $180{\times}180cm$) tree (T3). The experiment was laid out in randomized block design (RBD) and each treatment was replicated three times. From data it was observed that some morphological parameters of ginger such as plant height, number of leaves per plant, leaf length and leaf breadth were higher in the treatments T2 and T3 as compared to the treatment T1. A positive and linear relationship was observed between the weight of rhizome and yield of ginger which caused the highest yield of ginger ($23.63Mg\;ha^{-1}$) under guava tree species at partial shaded condition in the T3 treatment ($180{\times}180cm$), whereas the lowest yield ($15.64Mg\;ha^{-1}$) was recorded in the T2 treatment when ginger was cultivated under Gamar tree species at closer spacing ($90{\times}90cm$). Therefore, it was revealed that partial shaded condition favoured the optimum growth and yield of ginger, whereas the dense shade from intensively planted tree species badly affected the dry matter production and yield of ginger.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.355-367
• /
• 1989

This study examined the physical and mental health factors affecting the industrial accidents of 142 injured and 1,212 uninjured workers in the shipbuilding industry from 1986 to 1988. The results acquired from the Todai Health Index (THI) and from analysis of the health examination were as follows: 1. Among the personal characteristics of the workers, the educational level of injured workers was significantly lower than that of the uninjured workers. 2. Among the physical characteristics, vision and $R\ddot{o}hrer$ Index of the injured workers were lower than those of the uninjured workers, and the difference was statistically significant. On the other hand, the differences in height, weight, hearing function, hematocrit, blood pressure, urine test, and X-ray findings were not statistically significant between the injured and uninjured workers. 3. The score of the THI questionnaire on the physical and mental health of the injured workers was higher than that of the uninjured workers, and the difference was statistically significant. 4. Form the THI score, the industrial workers had complained more about mental health than physical health and there was a statistically singinficant relation with the industrial accidents. 5. The relative risk expressed in terms of the odds ratio was 2.9 for poorer vision, 2.7 for a lower educational level, 2.2 for a higher THI score and 1.6 for overdrinking. 6 Educational level, vision, and the THI score were selected as significant factors influencing industrial accidents based on a log-linear model. According to the results of this model by logistic analysis, the odds ratio of industrial accidents was 1.8 for a lower educational level, 1.7 for poorer vision, and 1.6 for a higher THI score. 7 By event history analysis with the dependent variable as the duration of work at the time of the industrial accident, educational level, age, $R\ddot{o}hrer$ Index and THI score were the statistically significant variables selected, and the hazard rate of industrial accident occurrence was 0.24 for a lower educational level, 0.92 for age, 0.99 for a lower $R\ddot{o}hrer$ Index and 2.72 for a higher THI score. As we have seen, educational level and THI score were the most significant factors affecting the hazard rate of industrial accidents. Vision, $R\ddot{o}hrer$ Index, age, and drinking behavior were also statistically significant variables influencing industrial accidents. Therefore, in order to prevent industrial accidents, it is necessary to establish a health management plan for industry which can objectively evaluate not only the physical but also the mental health of the workers. If we use this type of study as a prospective study design, we can determine the relative risk of physical and mental health factors on industrial accidents. Furthermore, it is expected that this type of study will provide workers at high risk with more precise basic data for a health managment plan for industrial accident prevention.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.173-179
• /
• 2001

Purpose : To assess therapeutic effects of percutaneous polymethylmethacrylate(PMMA) vertebroplasty on the pain caused by osteoporotic thoracic and lumbar vertebral body compression fractures in a large scale of a prospective clinical design, and to determine clinical factors influencing its therapeutic effects. Methods : A prospective clinical study was carried out in 349 vertebral levels of 159 patients between April 1998 and July 1999. The compression fractures were confirmed with bone scan and spine CT, and bone marrow density was measured. Visual analogue scale(VAS) score was used for pre- and post-operative assessments of the pain. All 159 patients were assessed immediately after surgery, and 140 patients of them were followed-up for about 6 months in average. Results : Partial and complete pain relief was sustained immediately after operation in 73%, through follow-up period in 88% of the patients. Pain relief was not proportional to the amount of PMMA or the rate of increase in the height of the compressed vertebral body. It appears that 3 to 6cc of PMMA was proper enough to sustain pain relief. Better clinical improvement was achieved in the patients treated within 6 months after occurrence of vertebral body fracture. The most frequent surgical complication was epidural leakage of PMMA, and the most serious complication was extravertebral leakage into the paravertebral muscles, which appeared to exert the worst influence on the outcome. However, surgery was not required in these patients. Conclusion : Therapeutic effects of PMMA percutaneous vertebroplasty on osteoporotic vertebral body compression fractures were confirmed in a relatively large scale of prospective clinical study. It appears that good outcome can be achieved in patients treated within 6 months after fracture, treated each level with 3 to 6cc of PMMA in amount. without serious complications.