• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.165-174
• /
• 1993

For the safety assessment of the demonstration-scale incineration plant for treating the combustible radioactive wastes, radiation doses of a worker and a residential individual were estimated. The demonstration plant showed a good performance of trial-burn tests using non-radioactive tracers with resulting In high mass reduction of around 40 times and very low emmission of dusts through a stack, which promised a high decontamination factor in an order of 10$^{7}$ . Based on the result s obtained from the trial-burns in the process, the estimation of radiation dose for workers and general publics near the plant was made using dose pathway calculation theories. The parametric values for calculation were selected from design and operational results of the process and from more conservative conditions In reference data. The estimated annual doses for workers and residential indivisuals were 3.07 $\times$ 10$^{-4}$ and 4.35 X 10$^{-8}$ $\mu$Sv/y, respectively, which were high enough to operate the process when comparing with the allowable dose limit in the regulation. The dose calculation models were quite applicable with showing an excellent safety for the process.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.83-90
• /
• 2020

This study conducted a risk assessment using the HyKoRAM program created by international joint research. Risk assessment was conducted based on accident scenarios and worst-case scenarios that could occur in the facility, reflecting design specifications of major facilities and components such as compressors, storage tanks, and hydrogen pipes in the hydrogen charging station, and environmental conditions around the demonstration complex. By identifying potential risks of hydrogen charging stations, we are going to derive the worst leakage, fire, explosion, and accident scenarios that can occur in hydrogen storage tanks, treatment facilities, storage facilities, and analyze the possibility of accidents and the effects of damage on human bodies and surrounding facilities to review safety.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1161-1179
• /
• 2022

In this study, the effects of show host's verbal communication subfactors, such as paralanguage, friendliness, and professionalism, as well as nonverbal communication subfactors, such as demonstration attitude, appearance, and attractiveness, on purchase intention were examined by evaluating customer empathy and product reliability. Data was collected from 20s-50s females. SPSS 23.0 and AMOS 23.0 were used for data analysis. The results revealed that professionalism and friendliness had a positive impact on customer empathy; however, friendliness had a negative impact on product reliability. Moreover, nonverbal communication subfactors had a positive impact on empathy, and appearance had a positive impact on product reliability. In contrast, attractiveness had a negative impact on product reliability, whereas empathy and product reliability had a positive impact on purchase intention. Thus, ensuring appropriate verbal and nonverbal communication is essential for customer empathy and product reliability. Given that a show host's friendliness, professional verbal communication, demonstration attitude, appearance, and attractiveness have a positive impact on customer empathy, these factors should be considered critical qualities of show hosts.

• Journal of Aerospace System Engineering
• /
• v.1 no.3
• /
• pp.13-20
• /
• 2007

The objective of this study is to investigate endurance test of localization part for T-50 aircraft engine. Major localization parts of the engine (F404-STW-102) was performed using Accelerated Simulated Mission Engine Test. The purpose of this test is to evaluate of quality demonstration capability, to verify design of engine localization parts, and to improvement safety and operation rate of T-50 advanced trainer by finding out operational problems in production phase and fixing it.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.258-260
• /
• 1998

급속도로 발전한 컴퓨터 환경하에서 사용자는 훨씬 더 편리하고 손쉽게 컴퓨터를 다룰 수 있게 되었다. 그러나 이와 대조적으로 지금까지의 프로그램 개발과정은 프로그래밍 언어의 숙달을 요구함으로서 전문적인 교육을 받은 소수의 프로그래머만이 할 수 있는 분야가 되었다. 이에 본 논문에서는 직관적인 사용자 인터페이스를 기반으로 하여 프로그래밍 언어를 모르는 사람들도 자신의 필요에 적합한 프로그램을 직접 작성하여 활용하는데 도움이 되는 시스템의 개발에 필요한 기반기술을 제시하고 구현된 시스템의 전체적인 윤곽을 제시한다.

• Archives of design research
• /
• v.17 no.2
• /
• pp.279-288
• /
• 2004

Corporate design activities have expanded from being exclusive and passive responsibilities to active participation in planning, marketing, technology and corporate brand image differentiation for successful business. Thus the communications between designers and other functions come to include critical decision making, information sharing, and objective reasoning. Given that design activities now have to involve various functions in product development, the styling-related design process, which is still developed by designer's intuition and experience, poses as an obstacle not just between various functions involved, but even within the design function. To overcome this obstacle and to lead more effective design decision process, a means for product form development assessment and management is necessary. This research proposes a foundation for managing and assessing product form based on the hypothesis and demonstration of discovering a system of formative factor and order a product form expresses that can be shared as an objective and logical system. As a result of this demonstration, the form as a unique visual expression and the factors related to the form and its co-relationship are examined. The factors are called formative parameters and the system is named as the product form alignment method. Based on the logic derived from the system, the process for developing an image that aligns with the predefined goal is explained. The method defines a balance between a designer's intuitive creativity and the extracted logic, which can act as a basis for designers to share design language among themselves and for communication between design and other functions. Based on this system, designers are able to align design work with the set goal, and focus and limit the range of form development, which is anticipated to result in lead-time reduction and minimizing unnecessary obstacles and mistakes.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.1-4
• /
• 2002

The present study aims to design a multiplayer microstrip antenna with composite sandwich construction and to estimate structural behavior of this multiplayer structure for the next generation of structural surface technology. This is termed Surface-Antenna-Structure indicating that structural surface becomes antenna. Constituent materials were selected considering electrical properties as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16\times16$ array antenna. From electrical measurements it was shown that antenna performances were in good agreement with design requirements. Structural analysis showed this antenna structure was well designed for the mechanical rigidity. All constituent materials were characterized independently. The SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• Solar Energy
• /
• v.18 no.1
• /
• pp.19-25
• /
• 1998

This paper describes a design method and characteristics analysis of the 3 kW grid-connected photovoltaic power generation system to establish the basic application technology of photovoltaic systems. The design specification of a 3 kW photovoltaic power generation system including a DC/AC inverter is suggested to investigate the system performance for grid connection. The results of the demonstration test from February to October show that the system with utilization rate up to 17% has reliable operation characteristics and is useful for peak-shaving of utility power.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.2
• /
• pp.255-262
• /
• 1992

A computer simulation methiod for costume design has been developed using LUMENA, a generic-purpose 2-dimensional graphic software. In this study the palette, tone chart, fabric chart, styling chart, and costume drawing were constructed on the computer. In costume design simulation, fabric swatches with various colors and patterns were applied to the base garment image taken by using a scanner or a video camera. In this procedure the original 3-dimensional effect was fully retained. Using this simulation method, a number of costume designs could be carried out in short time without actually making the garment. A portfolio including the tone chart, fabric chart, styling chart, costume drawing, and simulation results were made for the purpose of demonstration, using the animation tools of LUMENA.

• Journal of Aerospace System Engineering
• /
• v.5 no.1
• /
• pp.17-23
• /
• 2011

Since the time, cost and lack of regulatory information and guidance, one of the largest regulatory obstacles for an airframe manufacturer of polymer based advanced composite materials in certified aircraft applications, is to generate design allowables that will satisfy Airworthiness Regulations. In the past two decades, the design allowables used in military aircraft had been generated and applied in Korea, however the qualification of composite materials used in certifying airframe structure was not accomplished for design and demonstration of compliance to applicable airworthiness regulation. It is the intend of this paper that provide the basis of composite material qualification for small aircraft certification to the airworthiness regulation.