• Journal of the Korea Society for Simulation
• /
• v.10 no.2
• /
• pp.1-14
• /
• 2001

The layout design of component plays an important role in the design and usability of many engineering products. The Engineering artifacts of today are becoming increasingly complicated. The simulated annealing method has been applied effectively to the layout and packing problems of wafer. The main characteristics of simulated annealing method is that an optimum can be obtained from the many local optimums by controlling the temperature and introducing the statistic flickering. The objective of this study is to suggest a method to apply the simulated annealing method to the three dimensional layout design of submergible boat which has multiple constraint conditions and evaluation criteria. We describe an approach to define cost function, constraints and generate layouts using a computer. In this research three dimensional LAYout Design Optimization Program(LAYDOP ver.2) has been developed. The layout result(the total value of evaluation criteria) designed by a human layout expert has been improved by 31.0% using this program.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.299-304
• /
• 2014

Objective : The present study was intended to develop a design ideation and evaluation process for the development of ecology-, ergonomics-, and economy-friendly ($E^3$-friendly) products. Background : Due to increasing social and legal requirements on global sustainability, manufacturing companies have made more efforts ever than before for the development of eco-friendly products. However, most eco-friendly products are often criticized due to lacking ergonomic and/or economic considerations. Method : An $E^3$-friendly product development process consisting of (1) survey of eco-friendly products, (2) characterization of eco-friendly products, (3) design ideation for $E^3$-friendly product, and (4) design idea evaluation for $E^3$-friendliness was established and applied to the development of a novel product which supports drinking of daily recommended amount of water. Results : Fifty-five design characteristics were identified by a survey of forty eco-friendly products and incorporated into the proposed ideation and evaluation process. New ideas and design changes were developed effectively using the proposed development process for a novel $E^3$-friendly bottle for support of water drinking. Conclusion : The proposed process was found effective for the development of eco-friendly design ideas and improvements. Application : The proposed system would be of use to develop better design ideas having market competitiveness.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.159-165
• /
• 2011

This research entailed the production of stereoscopic 3D (S3D) contents using 2D-to-S3D conversion for exhibition at a museum and subjective evaluation. Hybrid production combining S3D images of existing live-action videos using the 2D-to-S3D conversion technology and computer graphic ones created via stereo rendering was conducted. Design and control of the chronological analysis of the parallactic angle was conducted on the produced contents, using binocular information as well as subjective evaluations, with the intent of conducting an investigation on the characteristics of such contents from the perspectives of the producers and viewers. An investigation was also conducted on the effects of the viewing position on the impressions of the S3D images.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.194-197
• /
• 2001

Traction motors driven by high speed switching inverters is demanded higher operating temperature, severe duty cycles, higher starting current, frequent voltage transients and finally severe environmental exposure. For applications to inverter duty, traction motors needs a special insulation system, which has characteristics of increased bond strength, lower operating temperature and higher turn-to-turn insulation. In this paper, design considerations and manufacturing procedure of 200 Class insulation system with polyimde(Kapton) main insulation and silicone resin VPI process on the traction motor for EMU will be reviewed. And performance test and long life evaluation test which prove stability and long life evaluation test which prove stability and reliability of insulation system for traction motor will be introduced.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.343-352
• /
• 2018

The objective of this study is to investigate the market of fitness compression wear as well as to design an optimal fitness compression wear by analyzing the muscle and movement characteristics of the elderly women in Korea. In this regard, research for functional garments is needed to increase muscle activity of elderly people during physical exercise. Firstly, we investigated the brand, design, size, material, and pattern of fitness wear based on the market survey. Secondly, we identified preference, evaluation items, evaluation method, and pattern design method based on the literature review. Finally, in addition, the motion type, range, angle to improve the muscle strength of the elderly were investigated and the maximum muscle strengths of each motion were analyzed by using 2007 Size Korea data (n = 386). It is also designed for muscle fatigue through exercise and rapid fatigue recovery after exercise. The evaluation methods for fitness compression wear were classified as motor functionality, physiological comfort, pattern and material suitability evaluations. The muscle strength at leg (pushing force) and waist (lifting force) of the ages of 60 to 69 years old showed 239.3 N and 274.5 N, respectively, which were the lowest forces compared to younger age groups. By applying these results to the design process of fitness wear, it is anticipated that the fitness wear will have a proper fit to the body shape of elderly people in South Korea as well as it can increase muscle efficiency to promote physical capability and healthy life for senior people.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• Journal of Engineering Education Research
• /
• v.15 no.2
• /
• pp.3-9
• /
• 2012

Normally, people think the results of engineering design project can be seen and be touched, however, it's not easy to develop such design subjects at IT related program. This matter turns into an initiative of Seoul Accord corresponding to the Washington Accord. In this paper, an engineering design project is developed from the lecture course that can hardly develop a touchable project due to the lack of expanse or the own characteristics of the course in the IT related program that follows the Washington Accord. An open-ended design project with the pre-defined design components and realistic constraints is developed for the Computer Network Design course. Each team consisted of 2 or 3 students performs the project for more than 5 weeks utilizing a software simulator, the Packet Tracer. In order to analyze the effectiveness, we have used various evaluation tools such as final presentation, peer evaluation, survey results, and mid/final exams. We concluded that the hard and soft skills of students have been improved considerably through the project.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.336-345
• /
• 2019

This study evaluated the preference and wearing characteristics of existing fitness compression wear for elderly women and identified the problems and improvements of existing fitness apparel. Preference and wearing characteristics for 6 types (A-F) of upper and lower fitness compression wear were evaluated. Photos and drawings as well as the preferred designs and details were investigated after presenting the evaluation clothing. Evaluations were made on a 5 point Likert scale for the fitness, allowance, pressure, ease of movement, fabric material, and overall satisfaction after wearing. The design preference indicated that B type (26.6%) and C type (23.4%) were preferred in the top with C, E and F type preferred to the same ratio of 19.4% in the slacks. The fitness and allowance amount of the top B type were the most appropriate (${\geq}4$), the C type was in close contact (2.86), and the F type was inadequate in the neck circumference (1.77). The feeling of pressure was high in the waist, abdomen, thighs, and knees. The area where the elderly people want to improve their strength was the legs; in addition, a pattern design was needed to strengthen leg muscles when designing fitness compression wear. However, a design with excessive adhesion due to a muscle support band was shown to be not preferred. Therefore, depending on the activity, it is necessary to develop a fitness compression wear that applies an optimum stretching ratio of fabric based on body surface area changes.

• Korean Institute of Interior Design Journal
• /
• v.17 no.6
• /
• pp.92-101
• /
• 2008

In the current age, as the importance of image is increased, brand images are strengthened, and various ways of expressing space are suggested considering the life styles of consumers. Recently, flagship stores are attempting various ways of expressing interior deigns and the flow of life culture, which can maximize the characteristics of image in a large, complex space. Centering on this trend, this study is conducted to explore an objective standard for the stylistic image characteristics reflecting the formative expression trend; to investigate various expression methods of images that are suggested by flagship stores; and to suggest the indicators of design. Based on this background, the formative trend is classified into the expression trends of minimalism and deconstructionism. An image evaluation test was conducted on the selected brand cases by applying the classification, and the following results are obtained from a comparative analysis. In this study, a stylistic analysis of expression methods is suggested from the stylistic image characteristics of each brand as well as from the reliability and validity of the expression trend. It can be concluded that such stylistic image characteristics are important factors in relation with fashion and architecture, and they can be used for differentiating design expression methods.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.110-117
• /
• 2006

This study presents an effective stiffness-based optimal technique to consider floor rigid diaphragm action and a technique to evaluate the structural behavior characteristics and efficiency for tall shear wall outrigger system subject to horizontal loads. To this end, isoparametric plane stress element with rotational stiffness is used for shear wall element and stiffness gradient is calculated. Also, the approximation concept to solve effectively the large scaled problems, member grouping technique and resizing technique are considered. To verify the effectiveness and usefulness of this technique, the efficient evaluation method for three types of 50 story model with core and outrigger system is presented.