• Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.103-110
• /
• 2018

Backgrounds: In arid grasslands, wells are subject to heavy trampling and grazing pressure, which can increase vulnerability to local land degradation. To investigate trampling and grazing, we surveyed plant communities at three well sites in the desert steppe of Mongolia, using 1600-m line transects from the wells. The sites (Bshrub, Sshrub, and shrubL) differed by concomitant shrub type (big shrub, small shrub, and shrub-limited) and livestock pressure (light, medium, and heavy). A plant classification scheme based on edibility and morphology (rosette or creeping type) was used to separate grazing and trampling effects on plant communities. Results: Edible plants were dominant at all sites but a fraction of grazing- and trampling-tolerant plants increased in the order Bshrub, Sshrub, and shrubL, following livestock pressure. Clear transition zones from inedible to edible plant groups were recognized but at different locations and ranges among the sites. Trampling-tolerant plants explained 90% of inedible plants at Sshrub with camels and horses, but grazing-tolerant plants prevailed (60%) at shrubL with the largest livestock number. Plant coverage increased significantly along the transects at Bshrub and Sshrub but showed no meaningful change at shrubL. Herbaceous plant biomass showed significant positive and negative trends at Bshrub and shrubL, respectively. Conclusions: Both grazing and trampling can produce larger fractions of inedible plants; in this, camel and horses can have considerable effects on desert-steppe plant communities through trampling.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.1
• /
• pp.81-90
• /
• 2017

We have analyzed the performance of 58 kWp photovoltaic (PV) power systems installed in Jeddah, Saudi Arabia. Performance ratio (PR) of 3 PV systems with 3 desert-type PV modules using monitoring data for 1 year showed 85.5% on average. Annual degradation rate of 5 individual modules achieved 0.26%, the regression model using monitoring data for the specified interval of one year showed 0.22%. Root mean square error (RMSE) of 6 big data analysis models for power output prediction in May 2016 was analyzed 2.94% using a support vector regression model.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.2
• /
• pp.397-402
• /
• 2010

A Gram-negative, rod-shaped, gliding, aerobic bacterium, designated $12157^T$, was isolated from the desert of Xinjiang, China and subjected to a polyphasic taxonomic study. The strain $12157^T$ grew optimally at pH 7.0 and $30^{\circ}C$. MK-7 was the predominant respiratory menaquinone. The DNA G+C content was 42.0 mol%. Phylogenetic analysis based on the 16S rRNA gene sequences showed that the isolate was mostly related to members of the genus Pedobacter, with similarities ranging from 90.0% to 93.7%. Phylogenetic evidence and the results of phenotypic and genotypic analyses support the establishment of a novel species, Pedobacter xinjiangensis sp. nov., with strain $12157^T$ (=CCTCC AB $208092^T$=NRRL B-$51338^T$) as the type strain.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.64-73
• /
• 2013

Because some particulate matter emission sources may inherently produce soluble species, or some soluble species may be produced during atmospheric transport, it is important to understand the origin of a particles's solubility when water-soluble tracers are used in source apportionment studies. Laboratory experiments were performed on three types of soils (Mongolia grassland, Mongolia desert, and Korean rural soils), to study the impact of acidification by nitric acid vapor on the solubility of metals in the soils. To achieve this goal, concentrations of water-soluble metals (Na, Mg, Al, K, Ca, Mn, and Fe) in the soils measured before and after acidification. Contributions of concentrations of water-soluble metal species before and after acidification attack to their total concentrations varied little with soil type. Concentrations of water-soluble Mg, Al, K, Ca, Mn, and Fe from the soils after interaction with nitric acid vapor increased, with significant increases in soluble Ca and Mn for all soil types suggesting soil acidification enhances the amount of leachable metal species in soil dust. There was little increase in water-soluble Na and K after acidification for each soil type. This experiment demonstrates that quantities of water-soluble metal species in particulate matter are produced under high gaseous nitric acid conditions.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.135-139
• /
• 2014

Different power output of solar cells can be observed at high-temperature regions such as desert areas. In this study, performance dependence on operating temperature of crystalline silicon solar cells with different emitter types was analyzed. Based on the light current-voltage (LIV) measurement, temperature coefficients of short-circuit current density ($J_{SC}$), open-circuit voltage ($V_{OC}$), fill factor (FF) and power conversion efficiency were measured and compared for two groups of crystalline silicon solar cells with different emitter types. One group had homogeneously doped (conventional) emitter and another selectively doped (selective) emitter. Varying the operating temperature from 25 to 40, 60, and $80^{\circ}C$, LIV characteristics of the cells were measured and the properties of saturation current densities ($J_0$) were extracted from dark current-voltage (DIV) curve. From the DIV data, effect of temperature on the performance of the solar cells with different electrical structures for the emitter was analyzed. Increasing the temperature, both emitter structures showed a slight increase in $J_{SC}$ and a rapid degradation of $V_{OC}$. FF and power conversion efficiency also decreased with the increasing temperature. The degrees of $J_{SC}$ increase and $V_{OC}$ degradation for two groups were compared and explained. Also, FF change was explained by series and shunt resistances from the LIV data. It was concluded that the degradation of solar cells shows different values at different temperatures depending on the emitter type of solar cells.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.1
• /
• pp.3-9
• /
• 2009

This paper examines the incorporation of the crushed sand (CS) and desert sand (DS) in the formation of self compacting concrete (SCC). These sands have been substituted for the rolled sand (RS), which is currently the only sand used in concretes and which is likely to run out in our country. DS, which comes from the Tunisian Sahara in the south, is characterized by a tight distribution of grains size. CS, a by-product of careers containing a significant amount of fines up to 15%, is characterized by a spread out granulometry having a maximum diameter of around 5mm. These two sands are considered as aggregates for the SCC. This first part of the study consists in analyzing the influence of the type of sand on the parameters of composition of the SCC. These sands consist of several combinations of 3 sands (DS, CS and RS). The method of formulation of the adopted SCC is based on the filling of the granular void by the paste. The CS substitution to the RS made it possible, for all the proportions, to decrease the granular voids, to increase the compactness of the mixture and to decrease the water and adding fillers proportioning. These results were also obtained for a moderate substitution of DS/CS (< 40%) and a weak ratio of DS/RS (20%). For higher proportions, the addition of DS to CS or RS did not improve the physical characteristics of the SCC granular mixture.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.3
• /
• pp.155-158
• /
• 2022

Objectives: The aim of this study was to observe the relationship between impacted mandibular third molars and development of temporomandibular joint (TMJ) disorders. Knowledge of the factors that have an adverse effect on the TMJ is necessary for proper diagnosis, treatment, and prognosis of TMJ disorders. Materials and Methods: The study was performed on 80 patients aged between 20 and 60 years with impacted mandibular third molars, over a period of two months. The patients were examined clinically and radiologically to determine the type of impaction and detect the associated TMJ symptoms or disorders. Results: In the 80 patients, 63.8% (51/80) of TMJ disorders were found in the horizontal group, 46.3% (37/80) in the mesioangular group, 42.5% (34/80) in the distoangular group, and 30.0% (24/80) in the vertical group of impacted mandibular third molars. Conclusion: The study concluded that type of impacted mandibular third molar is factor in the development of temporomandibular disorders.

• Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.22-29
• /
• 2006

We determined the partial cDNA of Type II procollagen ${\alpha}1$[pro-${\alpha}1$(II)] chain (1802 bp) of the skate Raja kenojei, which codes 581 amino acid residues. The partial structure of the pro-${\alpha}1$(II) chain consisted of a part of triple helical region (309 residues) and a C-domain (272 residues). Comparing the chain to other vertebrates showed relatively low homology (about 50%) at the amino acid level. However, eight Cys residues in the C-domain of the skate pro-${\alpha}1$(II) chain were conserved in common with those of other vertebrates. The skate pro-${\alpha}1$ (II) chain mRNA was detected by RT-PCR of various tissues, but was undetected in tissues containing Type II collagen. The low homology and unexpected expression pattern suggest the presence of another mRNA variant of the skate pro-${\alpha}1$(II) chain. The present study is the first report of the primary structure of pro-${\alpha}1$(II) chain in an elasmobranch.

• Wind and Structures
• /
• v.22 no.5
• /
• pp.555-571
• /
• 2016

A hanging-type sand-retaining wall is a very common sand-blocking fence structure used to prevent sand movement. This type of wall is widely used along the Qinghai-Tibet and Gobi desert railways in Xinjiang, Western China. To analyze the characteristics of wind-sand flow fields under the effect of such a sand fence structure, a wind tunnel test and a field test were carried out. The wind tunnel test showed the zoning characteristics of the flow fields under the effect of the hanging-type sand-retaining wall, and the field test provided the sediment transport data for effective wind-proof interval and the sand resistance data in the front and behind the sand-retaining wall. The consistency of the wind-sand flow fields with the spatial distribution characteristic of wind-carried sand motion was verified by the correspondences of the acceleration zone in the flow field and the negative elevation points of the percentage variations of the sand collection rate. The spatial distribution characteristic of the field sand collection data further showed the spatial structural characteristic of the sandy air currents under the action of the hanging-type sand-retaining wall and the sand resistance characteristic of the sand-retaining wall. This systematic study on the wind-sand flow fields under the control of the hanging-type sand-retaining wall provides a theoretical basis for the rational layout of sand control engineering systems and the efficient utilization of a hanging-type sand-retaining wall.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.61-66
• /
• 2010

This paper is concerned with an analysis of the back scattering of electromagnetic waves from a target moving along random rough surfaces such as the desert, and sea. First, the discrete ray tracing method(DRTM) is introduced, and then, this method is applied to the back scattering problem in order to investigate the effect of the back scattering from random rough surfaces on the electric field intensities. Finally, numerical examples of various height deviations of the Gaussian type of rough surfaces are shown. It is numerically demonstrated that the back scattering is dominated by the diffractions related to the reflections from the random rough surfaces.