• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.109-112
• /
• 2002

So far, the closed-form Green's functions have been derived almost for th open microstrip structures. In the present study, closed-form Green's functions for a top-covered microstrip structure are derived. And an effect of top-cover is discussed in comparison with open structure.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.4
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• Structural Engineering and Mechanics
• /
• v.38 no.2
• /
• pp.157-169
• /
• 2011

In this paper the time-dependent closed-form static solution of the suspended pre-stressed biconcave and biconvex cable trusses with unmovable, movable and elastic or viscoelastic yielding supports subjected to various types of vertical load is presented. Irvine's forms of the deflections and the cable equations are modified because the effects of the rheological behaviour needed to be incorporated in them. The concrete cable equations in the form of the explicit relations are derived and presented. From a solution of a vertical equilibrium equation for a loaded cable truss with rheological properties, the additional vertical deflection as a time-function is determined. The time-dependent closed-form model serves to determine the time-dependent response, i.e., horizontal components of cable forces and deflection of the cable truss due to applied loading at the investigated time considering effects of elastic deformations, creep strains, temperature changes and elastic supports. Results obtained by the present closed-form solution are compared with those obtained by FEM. The derived time-dependent closed-form computational model is used for a time-dependent simulation-based reliability assessment of cable trusses as is described in the second part of this paper.

• Structural Engineering and Mechanics
• /
• v.1 no.1
• /
• pp.47-60
• /
• 1993

The eigen-equation of a wave traveling over repetitive structure is derived directly form the stiffness matrix formulation, in a form which can be used for the case of the cross stiffness submatrix $K_{ab}$ being singular. The weighted adjoint symplectic orthonormality relation is proved first. Then the general method of solution is derived, which can be used either to find all the eigensolutions, or to find the main eigensolutions for large scale problems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.432-438
• /
• 2002

In this paper, we described a technique for the swing-up control of a 2 link acrobat robot using a cannonical form which is derived form the law of conservation of an angular momentum based on the center of the first joint. The wide usefulness of the canonical form of the acrobat robot, which was suggested here, is could also be applied to control a free flying robot or an underactuated planar manipulator with no gravity term. Some simulation results are provided to verify the effectiveness of the proposed algorithm

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.74-87
• /
• 2017

The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.77-85
• /
• 2012

The membrane structure maintains stable form by giving initial tension to ductile membrane and increasing the stiffness of exterior that is much adopted in the large span spatial structure by making its thickness thin. This kind of membrane structure has characteristic that can express free-form curve, so the selection of structural form is very important. So, this paper proposes the expression of free-form surface based on NURBS basis function and the finite element method considering geometrical nonlinearity for the deduction of large deformation result. Also, for minimizing the approximation of the surface that is derived from the form-finding result, the interface method that change finite element mesh to NURBS is proposed. So, the optimum surface of free-form membrane is derived.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.67-79
• /
• 2000

Critical loads and load-carrying capacities for steel scaffolds used as shoring systems were compared using computational and experimental methods in Part I of this paper. In that paper, a simple 2-D model was established for use in evaluating the structural behavior of scaffold-shoring systems. This 2-D model was derived using an incremental finite element analysis (FEA) of a typical complete scaffold-shoring system. Although the simplified model is only two-dimensional, it predicts the critical loads and failure modes of the complete system. The objective of this paper is to present a closed-form solution to the 2-D model. To simplify the analysis, a simpler model was first established to replace the 2-D model. Then, a closed-form solution for the critical loads and failure modes based on this simplified model were derived using a bifurcation (eigenvalue) approach to the elastic-buckling problem. In this closed-form equation, the critical loads are shown to be function of the number of stories, material properties, and section properties of the scaffolds. The critical loads and failure modes obtained from the analytical (closed-form) solution were compared with the results from the 2-D model. The comparisons show that the critical loads from the analytical solution (simplified model) closely match the results from the more complex model, and that the predicted failure modes are nearly identical.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3342-3360
• /
• 2014

In this paper, the capacity and BER performance of downlink distributed antenna systems (DAS) with transmit antenna selection and multiple receive antennas are investigated in MIMO composite channel, where path loss, Rayleigh fading and lognormal shadowing are all considered. Based on the performance analysis, using the probability density function (PDF) of the effective SNR and numerical integrations, tightly-approximate closed-form expressions of ergodic capacity and average BER of DAS are derived, respectively. These expressions have more accuracy than the existing expressions, and can match the simulation well. Besides, the outage capacity of DAS is also analyzed, and a tightly-approximate closed-form expression of outage capacity probability is derived. Moreover, a practical iterative algorithm based on Newton's method for finding the outage capacity is proposed. To avoid iterative calculation, another approximate closed-form outage capacity is also derived by utilizing the Gaussian distribution approximation. With these theoretical expressions, the downlink capacity and BER performance of DAS can be effectively evaluated. Simulation results show that the theoretical analysis is valid, and consistent with the corresponding simulation.

• Korean Journal of Veterinary Research
• /
• v.17 no.2
• /
• pp.41-49
• /
• 1977

The present study was underve the histochemical nature of various follicles and interstitial tissues in the ovaries of Korean native goats and cattle as well as the histochemical changes of those in the ovaries of Korean native goats treated with dexamethasone. Much more lipid granules appeared in the granulosa and theca cells of atretic follicles compared with normal follicles in these ruminant ovaries. In the ovaries of Korean native goats the interstitial tissue derived from the theca interna of atretic follicles appeared the form of patches of cells and the interstitial tissue derived from stromal cells appeared the form of diffuse, obscure bounds. In the ovaries of Korean native cattle the interstitial tissue derived from theca interna of atretic follicles showed sparsely scattered form of pathes of cells. The histochemical components were described on the basis of lipids in the granulosa and theca cells of normal follicles, atretic follicles and interstitial tissue. In the ovaries of Korean natve goats treated with dexamethasone, the granulosa and theca cells of atretic foillicle contained plenty lipid granules that were increased in size and number, however, lipid granules were markedly decreased in the interstitial tissue.