• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.6
• /
• pp.355-364
• /
• 2024

Recently, high-rise residential buildings in Korea have adopted slender shear walls with irregular section shapes, such as T-shape, H-shape, and C-shape. In the seismic design of the slender shear walls, the transverse reinforcement for lateral confinement should be provided in the boundary elements to increase deformation capacity and subsequent ductility. However, in practice, the irregularity of the shear walls is not adequately considered, and the lateral confinement region is calculated for the rectangular wall segments. This study investigated the proper design method for lateral confinement regions using finite element analysis. The lateral confinement region was considered in analysis for two cases: 1) as a typical rectangular wall segment and 2) as an irregular wall. When the irregularity of the walls was considered, the compression zone depth was increased because the vertical reinforcement in the flange was addressed. The effect of lateral confinement design methods on the structural performance of the walls was directly compared under various design parameters, including the length of the flange, concrete compressive strength, vertical rebar layout, axial load ratio, and loading direction. According to the results of the parametric analysis, the peak strength and deformation capacity could be significantly increased when the lateral confinement region was calculated based on irregularly shaped walls, regardless of the design parameters. In addition, the effective compression zone was located within the lateral confinement region. Thus, it is recommended that the lateral confinement region of T-shaped walls is calculated by addressing the irregularity of the walls.

• Steel and Composite Structures
• /
• v.52 no.4
• /
• pp.419-434
• /
• 2024

A flat slab is a structural system where columns directly support it without the presence of beam elements. However, despite its wide advantages, this structural system undergoes a major deficiency where stresses are concentrated around the column perimeter, resulting in the progressive collapse of the entire structure as a result of losing the shear transfer mechanisms at the cracked interface. Predicting the punching shear capacity of RC flat slabs is a challenging problem where the factors contributing to the overall slab strength vary broadly in their significance and effect extent. This study proposed a new expression for predicting the slab's capacity in punching shear using a nonuniform concrete tensile stress distribution assumption to capture, as well as possible, the induced strain effect within a thick RC flat slab. Therefore, the overall punching shear capacity is composed of three parts: concrete, aggregate interlock, and dowel action contributions. The factor of the shear span-to-depth ratio (a_v/d) was introduced in the concrete contribution in addition to the aggregate interlock part using the maximum aggregate size. Other significant factors were considered, including the concrete type, concrete grade, size factor, and the flexural reinforcement dowel action. The efficiency of the proposed model was examined using 86 points of published experimental data from 19 studies and compared with five code standards (ACI318, EC2, MC2010, CSA A23.3, and JSCE). The obtained results revealed the efficiency and accuracy of the model prediction, where a covariance value of 4.95% was found, compared to (13.67, 14.05, 15.83, 19.67, and 20.45) % for the (ACI318, CSA A23.3, MC2010, EC2, and JSCE), respectively.

• Animal Bioscience
• /
• v.37 no.12
• /
• pp.2126-2136
• /
• 2024

Objective: This study investigated the protein oxidation of soybean meal (SBM) stored in a warehouse and the effects of SBM on growth performance, antioxidant status, digestive performance, intestinal morphology, and breast muscle quality of broilers. Methods: In total, 160 one-day-old Arbor Acres Plus broilers (half male and half female) were randomly divided into two groups with ten replicates of eight birds each: The control group was served with a basal diet including SBM stored at -20℃ (FSBM), and the experimental group was served with a basal diet including SBM stored in a warehouse at room temperature for 45 days (RSBM). Results: Compared with FSBM, the protein carbonyl level in RSBM was increased, the free and total thiol levels and in vitro digestibility of protein were decreased. The RSBM decreased the serum glutathione (GSH) level and the hepatic total superoxide dismutase (T-SOD) activity at days 21 and 42 when compared with FSBM. Further, RSBM reduced the duodenal T-SOD activity, jejunal catalase (CAT), and T-SOD activities at day 21, and decreased the duodenal CAT and T-SOD activities, jejunal T-SOD activity, and ileal GSH level and T-SOD activity at days 21 and 42 when compared with FSBM. Besides, the trypsin activity and the ratio of villus height to crypt depth in small intestines of broilers at days 21 and 42 were reduced when fed with a RSBM-contained diet. Compared with FSBM, the 24-h drip loss, shear force, and 24- and 48-h cooking loss of breast muscle were increased of RSBM group, the opposite result was observed for muscle lightness at 48 h. Conclusion: Room temperature storage for 45 days led a protein oxidation and decreased in vitro digestibility in SBM, and fed RSBM impaired growth performance, antioxidant status, and meat quality, reduced trypsin activity, and affected the small intestine morphology in broilers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.337-348
• /
• 2024

Artificial reef often experiences a functional loss due to scour, even though serveral surveys of a seabed were performed prior to installation. Particularly in the east and west coasts in Korea, where the artificial reefs are installed, there are clear differences in the geotechnical characteristics of the seabed. Therefore, in this study, both field surveys and laboratory experiments were conducted to investigate the scouring characteristics of artificial reefs installed on the east and west coasts of Korea. The laboratory experiments were performed with different velocities and soil types. The field survey results of artificial reef revealed that artificial reef-installed seabeds in the east and west coasts are more vulnerable to scour than settlement. Particularly in the west coast, the loss ratio caused by scour was found to exceed 50 % in most cases. The experimental results showed that scouring occurred faster and more severely on the west coast seabed, which has a smaller particle size compared to the east coast. Additionally when the scour depth exceeded approximately 10 % of the height of the artificial reef, the artificial reef tilted forward and further scouring was induced.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.263-277
• /
• 2024

The primary aim of this study is to introduce an innovative configuration for stirrup hooks in reinforced concrete beams and analyze the impact of factors such as stirrup spacing, placement, and hook lengths on the structural performance of reinforced concrete beam elements. A total of 18 specimens were produced and subjected to reversed cyclic loading, with two specimens serving as reference specimens and the remaining 16 specimens utilizing a specifically developed stirrup hook configuration. The experiment used reinforced concrete beams scaled down to half their original size. These beams were built with a shear span-to-depth ratio of 3 (a/d=3). The experimental samples were divided into two distinct groups. The first group comprises nine test specimens that consider the contribution of concrete to shear strength, while the second group consists of nine test specimens that do not consider this contribution. The preparation of reference beam specimens for both groups involved the utilization of standard hooks. The stirrup hooks in the test specimens are configured with a 90-degree angle positioned at the midpoint of the bottom section of the beam. The criteria considered in this study included the distance between hooks, hook angle, stirrup spacing, hook orientation, and hook length. In the experimental group examining the contribution of concrete on shear strength, it was noted that the stirrup hooks of both the R1 reference specimen and specific test specimens displayed indications of opening. However, when the contribution of concrete on shear strength was not considered, it was observed that none of the stirrup hooks proposed in the R0 reference specimen and test specimens showed any indications of opening. Neglecting the contribution of concrete in the assessment of shear strength yielded more favorable outcomes regarding structural robustness. The study found that the strength values obtained using the suggested alternative stirrup hook were similar to those of the reference specimens. Furthermore, all the test specimens successfully achieved the desired strengths.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.3
• /
• pp.246-253
• /
• 2024

When concrete with slag powder or fly ash is under an accelerated carbonation test at early age, a very complicated carbonation behavior occurs since several reactions covering cement hydration, pozzolanic reaction, and carbonation reaction occu simultaneously. In particular, fine and coarse aggregates with poor quality were used, the trend with strength development and carbonation behavior was not clear. In this study, concrete samples with three design strength grade(24 MPa, 27 MPa, and 30 MPa) were manufactured with different aggregates site(A, B, and C). Compressive strength test were performed considering curing ages(7 and 28 days), and the accelerated carbonation tests were performed for 8 weeks for evaluating carbonation rate. The relationship between compressive strength and carbonation rate was analyzed considering mix properties and the aggregate site conditions. In addition, the minimum cover depth satisfying intended service life was obtained through carbonation design based on Domestic Design Code, and the necessities for improving design parameters (direction coefficient and effective water-binder ratio) were suggested.

• Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.247-255
• /
• 2024

Background: To effectively understand and evaluate plant diversity in a specific area and make meaningful comparisons between regions, standardized methods that measure diversity irrespective of survey plot size are crucial. This study proposes a model equation for comparing plant species diversity using the modified Whittaker plots. Plant species diversity was measured in two Gotjawal areas on Jeju Island, where the coexistence of northern and southern limit species significantly impacts diversity. By analyzing the relationship between plant species diversity and environmental factors, the study clarified the characteristics of plant and habitat diversity in the Gotjawal ecosystem. Results: The species richness of vascular plants, herbaceous plants, and woody plants increased with area and was higher in Jeoji Gotjawal than in Seonheul Gotjawal. Similarly, the species turnover rate (slope value) was higher in Jeoji Gotjawal (4.37) than in Seonheul Gotjawal (3.85). This indicates that the species richness in Jeoji Gotjawal increases more with the expansion of the survey area (1-1,000 m²), reflecting a faster species turnover rate. Additionally, in Gotjawal areas, species richness increased with greater leaf litter depth, elevation, slope, and rock ratio. These results indicate that differences in plant species diversity were attributed to soil environmental factors. Conclusions: The plant species diversity of Gotjawal, surveyed using standardized methods, was lower than that of forested areas in the central region of South Korea where the same method was applied. Most previous studies on species diversity likely compared diversity without considering a consistent survey area. Therefore, when comparing plant species diversity domestically and globally, it emphasizes the need for the use of standardized survey methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.6
• /
• pp.1180-1193
• /
• 2024

In this study, we provided foundational data for developing combat uniform patterns for female soldiers by analyzing anthropometric data of Korean women in their 20s-40s. We utilized the 6th (2010) and 8th (2021) datasets from Size Korea. We conducted a wearing evaluation of fit suitability on participants who met the average measurements in the 8th dataset. Compared to the 6th dataset, all height items increased in the 8th dataset, except for hip height. The length, circumference, breadth, and depth items increased, except for bust point breadth, crotch length, upper arm length, arm length, and vertical trunk circumference. The flatness ratio decreased, resulting in a rounder body shape. Additionally, the A body type, characterized by larger hips than the chest and a slim waist, was more prevalent. During the wearing evaluation, participants reported discomfort in the shoulder, posterior shoulder, bottom of the jacket, hip, and thigh areas. Therefore, to reflect these changes in the 8th dataset, wearing evaluation and ease of the current combat uniform patterns for female soldiers should be adjusted by increasing the bottom, posterior shoulder, and shoulder length of the jacket. Additionally, for the pants, the hip circumference should be increased.

• Journal of Sasang Constitution and Immune Medicine
• /
• v.8 no.1
• /
• pp.101-186
• /
• 1996

The clinical application of constitutional Diagnosis is the most important part of Sasang constitutional medicine. It has been studied in various way. However, the study of morphologic characteristics on the face is applied for the first time. For quantitative analysis of the correlation between the sasang constitution and the shape of the face, the head-facial part of 170 cases were measured by Martin's measurement and analysis of a) the measurement value of height and the component ratio from the Gnathion to each part of face by constitution. b) the measurement value of depth and the component ratio from T-projected to each part of the face by constitution. c) the measurement value of breadth and component ratio between each parts of the facial breadth by constitution. d) the ratio of square on every part of face by constitution. e) the characteristics on each part of the face by constitution. f) the contour line of the forehead. g) the result of discriminant analysis about the constitution. Authors obtained the results from the study as follows; 1. The characteristics of Taeum-IN (1) The measurement value of Height, Breadth, T-Projected had a tendency to maximum value in general. (2) The value of lower opthal height and the square of lower opthal part was maximum. (3) The value of Pronasal T-projected length and Subnasal T-projected length was minimum, so Taeum-In has characteristics of depression in middle face, nasal part. (4) In the ratio of Breadth, T-Projected, T-Projected was minimum. (5) It was maximum that the square of nose, Alare, Middle face, Lower face and it was minimum that the square of eye. The square of nose, Alare, Middle facc, Lower face was maximum and the square of eye was minimum. (6) The curvature of the eyebrow was minimum. (7) The projection of jaw (Pogonion T-projection length) was maximum. (8) The breadth of eye was minimum. (9) There was a tendency that the projection of the forehead to the right in general. 2. The characteristics of Soeum-In (1) In all cases of projected length the measurement value was minimum. (2) The value of lower opthal height and the square of lower opthal part was minimum. (3) By the Pupulare T-projected length, the value of Pronasal T-projected length and Subnasal T-projected length was minimum, so the Soeum In's face shape is flat. (4) The square of eye, mouth, forehead was maximum and the square of nose, Alare, Middle face, Lower face was minimum. (5) The curvature of the eyebrow was maximum. (6) The projection of mouth was minimum. (7) The jaw was flat. (8) The breadth of eye was maximum. (9) There was a tendency that the projection of the forehead to the left in general. 3. The characteristics of Soyang-In. (1) In most cases of 고경 length the measurement value was minimum. (2) By the Pupulare T-projected length, each ratio of projected length was maximum, so the Soyang-In's face shape has many protrusions (3) In the ratio of Breadth, T-Projected, T-Projected was maximum. (4) The square of mouth was minimum. (5) The inclination of the forehead was minimum. (6) The projection of mouth was maximum. (7) The breadth of eye was minimum. (8) There was a tendency that the projection of the forehead to the left in general. (9) The middle face was protruded. 4. Discriminant about the constitution. According to the result of discriminant, the accuracy probability of discriminant was 85.58% in total and Taeum-In was 90.5%, Soeum-In was 70.8%, Soyang-In was 89.5%. The accuracy probability of discriminant about 3 constitutional group increased by 49.03% than the accident probility 36.55% 5. Suggestion (1) The study which gather and analysis the data should be continued. (2) The study which subdivide the characteristics of each part of the face by the constitution should be continued. (3) The analysis method about Moire should be supplement. (4) The study about the morphologic characteristics of the whole body should be continued. (5) Computer program of constitution diagnosis should be developed. (6) To increase utility of this method, the measurement should be automation.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.16-25
• /
• 2003

Manun Reservoir, located in Andong district has the capacity of 2 million tons in irrigation water supply with the drainage area of $23.8\;km^2$. Manun Reservoir is over fifty year old, and shallow in depth. The ratio of drainage area (DA) to reservoir surface area (SA) as an effective physical parameter on water quality was 56.1 and was higher than those of other agricultural reservoirs. The ratio of reservoir storage (ST) to SA in Manun Reservoir was 4.79, and the mean depth was below 8m. Both ratios of DS/SA, total area (TA)/ST and ST/SA in Manun Reservoir were relatively higher than those in other agricultural reservoir and natural lakes in Korea. These physical parameters in Manun Reservoir, however, had a eutropic potential significance. Average of COD, IN, and TP in Manun Reservoir were 11.1 mg/L 1.426 mg/L, 0.093 mg/L, respectively. In the inflow stream of Manun Reservoir, the TN ($1.426{\sim}3.809\;mg/L$) was higher than those in reservoir. Only Lyngbya spp. was dominant in phytoplankton for this study period and Gymnodinium spp., Peridinium spp., and Cryptomonas spp. were dominant in zooplankton. According to the Carlson's trophic status index, Mnnun Reservoir was eutrophic in 1996, 1997, and 1999, and hypertrophic in 1998.