• 문화기술의 융합
• /
• 제9권3호
• /
• pp.669-676
• /
• 2023

본 연구는 인접굴착에 따른 기존 도시철도 박스구조물의 안전영역에 관한 연구로서 도시철도 주변에서 시행되는 각종 굴착공사에 따라 도시철도 박스구조물의 거동에 영향을 미치는 주요 매개변수와 수치해석 결과의 상관관계를 분석하였으며, 머신러닝 기법 적용을 통하여 인접굴착공사가 기존 도시철도 박스구조물에 미치는 영향 범위 및 안전영역의 적정성을 검증하였다. 본 연구는 도시철도 주변의 실제 협의된 인접굴착공사 및 박스구조물을 연구대상으로 하였으며, 그 중 가장 대표적인 본선 2련박스 구조물을 대상으로 분석을 수행하였다. 매개변수 분석 및 머신러닝 해석결과, 도시철도 깊이, 인접굴착공사 굴착깊이 및 지하수위 각각의 상호간의 깊이 차이가 중요한 매개변수인 것으로 확인되었으며, 그 중에서도 도시철도 깊이와 인접굴착공사의 굴착깊이 차이가 지하 박스구조물 거동에 가장 큰 영향을 미치는 매개변수이며, 안전영역 설정의 중요한 요건인 것으로 분석되었다. 특히, 인접굴착공사 깊이가 도시철도 깊이보다 더 깊게 굴착될수록 지하 박스구조물의 처짐에 미치는 영향은 더욱 큰 것으로 확인되었으며, 기존의 인접굴착공사 관리등급 결정 시 중요 요건 중 하나인 수평이격거리는 수직이격거리, 즉 굴착깊이에 비해 상대적으로 영향이 작은 것으로 분석되었다.

• 한국지반공학회지:지반
• /
• 제8권4호
• /
• pp.81-98
• /
• 1992

고층건물이나 지하철등의 건설시 지하굴착을 깊게 실시하므로서 지하공간의 활용도를 증대시킬 수 있다. 이 경우 지하를 연직으로 굴착하기 위하여는 흙막이벽과 지지구조를 안전하게 설계 시공하여야 한다. 최근에는 지하굴착시 지하작업공간확보등의 이점 때문에 흙막이벽지지 구조로 앵가를 만이 사용하는 경향이 있다. 본 논문에서는 사질토지반의 지하굴착을 실시한 8개 감각현장에서 굴착을 위한 흙막이벽을 지지하기 위하여 사용된 앵카에 하중계를 부착하여 앵카의 축력을 측정하였다. 측정된 앵카축력으로부터 환산된 측방토압은 흙락이벽체의 강성에 관계없이 지표면으로 탁터 굴착깊이의 30%에 해당되는 깊이까지는 선형적으로 증가하다가 그 깊이 아래부터는 일정분포를 보이는 사다지꼴모양의 분포를 보였다. 이 일정토압 분포부분의 토압은 평균적으로 최종굴착 깊이에서의 Rankine 주동토압의 63%에 해당하거나 쳔직상개입의 17점에 해당하였다. 이 연구 결과 사질토지반의 앵카지지 흙막이벽의 앵카축력설계에 적용하기 위한 측방토압으로는 Terzaghi-Peck이나 Tschebotarioff의 경험적분포를 다소 수정하여 적용할 수 있음을 알았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.801-810
• /
• 2010

Until now, design of Earth Retaining is practiced by 2nd dimensional analysis for convenience of analysis and time saving. However, the construction field is 3rd dimension, in this study, practised the 3rd dimensional analysis which can reflect the field condition more exactly the scope of earth retaining wall, and researched about the effective and economical way of design, compared and reviewed with the results, by practising both the 2nd and 3rd dimensional analysis. existing 2nd dimension. the depth of excavation, depth of embedded and soil condition. As result, under the whole conditions, more displacement came to appear to the value as result of 3rd dimensional analysis more than the result of 2nd dimensional analysis. Accordingly, the displacement by the 2nd dimension analysis is underestimated. Moreover, results of 2nd and 3rd dimensional analysis, there is no difference at displacement, when the depth of embedded is 0.5H, 1.0H and 1.5H, but Displacement of 1.5H is smaller than 0.5H, 1.0H. That is, the bigger the depth of embedded becomes, the displacement of Earth Retaining Wall appeared smaller. The displacement of earth retaining wall according to depth of excavation appeared bigger, when the depth of excavation is increased. In the meantime, when the soil condition is different, in the 2nd dimensional analysis, the displacement appeared biggest, in case of the clay layer, but in the 3rd dimensional analysis, in the beginning of excavating, the displacement of earth retaining wall appeared bigger in case of clay layer, but as excavating is in progress, the displacement of both compound soil layer and sand layer appeared big.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.507-518
• /
• 2023

The effects of various supporting arrangements have been investigated on an excavation support system using a numerical tool. The purpose of providing different supporting arrangements was to limit the pile wall deflection in the range of 0.5% to 1% of the excavation depth. Firstly, a deep excavation supported by sheet pile wall was modeled and the effects of sheet pile wall thickness, excavation depth and distance to adjacent footings from sheet pile wall face were explored on the soil deformation and wall deflection. Further analysis was performed considering six different arrangements of tieback anchors and struts in order to limit the wall deflections. Case-01 represents the basic excavation geometry supported by sheet pile wall only. In Case-02, sheet pile wall was supported by struts. Case-03 is a sheet pile wall supported by tieback anchors. Likewise, for the Cases 04, 05 and 06, different arrangements of struts and tieback anchors were used. Finally, the effects of different supporting arrangements on soil deformation, sheet pile wall deflection, bending moments and anchor forces have been presented.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.123-132
• /
• 1991

The GEOKST program was used to solve the tunnel example problem. The package can solve such geotechnical problem as excavation, embankment, foundations, etc., in which the soil can be modeled by various elastoplastic geomaterial models. The main objective was to consider the effects of excavation depth to the face of the tunnel on the stability of the ground and support system. Depended on the strength of the ground materials, the limit excavation depth without any support system could be established by analyzing three-dimensional excavation problem. In this given example problem, the strengths of the ground materials were enough for the stability of the tunnel without any support system up to fairly deep excavation and the maximum tunnel section displacement was stabilized as the excavation proceed. The asymptotic value was approximately the same as that of the plane strain analysis. Thus, assuming the plain strain condition and simulation the actual excavation procedure, the maximum tunnel section displacement was caculated after final step. The maximum calculated displacement occured at the top section of the tunnel geometry and was about 8mm.

• 한국지반공학회논문집
• /
• 제25권5호
• /
• pp.39-46
• /
• 2009

본 연구에서는 조립질의 퇴적층이 깊게 분포되어 있고 지하연속벽과 지반앵커로 구성된 굴착현장을 선정하여 흙막이 벽계와 배면지반의 수평변위 비교, 벽체 내부에 깊이별로 설치된 토압계와 앵커 두부에 설치된 축력계로 부터의 토압과 축력의 변화등을 정밀하게 평가분석 하였다. 분석결과 강성벽계의 수평변위는 벽체 내부에 설치된 지중경사계로 측정된 결과가 보다 합리적인 것을 알 수 있었다. 그리고 단계별 굴착에 따른 토압의 변화를 분석한 결과, 굴착이 진행됨에 따라 지반앵커의 선행 긴장력으로 인해 배면 토압은 점차 증가하는 경향을 나타내고 있었으며, 지하연속벽이 강성 벽체지만 퇴적층이 깊고 굴착 깊이가 깊은 경우에는 연성벽체에서 경험적으로 평가된 경험토압과 유사한 결과가 나타남을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제13권12호
• /
• pp.67-74
• /
• 2012

기존건물의 지하층과 인접하여 굴착 시 양단벽체 토사의 마찰로 발생하는 아칭효과는 굴착벽체에 작용하는 토압을 경감시키게 된다. 본 논문에서는 굴착깊이에 대한 배면폭의 비와 벽마찰각의 변화에 따른 아칭효과의 변화를 다양한 조건에서 수치해석을 통하여 살펴보았다. 수치해석 모델은 원심모형시험결과를 바탕으로 검증하여 적용하였으며, 아칭에 의한 토압경감 효과는 굴착깊이에 대한 배면폭의 비가 작고 벽마찰각이 커짐에 따라 증가함을 알 수 있었다. 이와 같은 아칭 현상은 기존의 아칭이론 중 Handy(1985)가 제안한 이론식을 통하여 가장 정확히 묘사 가능함을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.181-185
• /
• 2010

Until now, design of Earth Retaining is practiced by 2 dimensional analysis for convenience of analysis and time saving. However, the construction field is 3 dimension, in this study, practised the 3 dimensional analysis which can reflect the field condition more exactly the scope of earth retaining wall, and researched about the effective and economical way of design, compared and reviewed with the results, by practising both the 2 and 3 dimensional analysis. existing 2 dimension. the depth of excavation, depth of embedded and soil condition. As result, under the whole conditions, more displacement came to appear to the value as result of 3 dimensional analysis more than the result of 2nd dimensional analysis. Accordingly, the displacement by the 2 dimension analysis is underestimated. Moreover, results of 2 and 3 dimensional analysis, there is no difference at displacement, when the depth of embedded is 0.5H and 1.0H, but Displacement of 1.5H is smaller than 0.5H, 1.0H. That is, the bigger the depth of embedded becomes, the displacement of Earth Retaining Wall appeared smaller. The displacement of earth retaining wall according to depth of excavation appeared bigger, when the depth of excavation is increased. In the meantime, when the soil condition is different, in the 2 dimensional analysis, the displacement appeared biggest, in case of the clay layer, but in the 3 dimensional analysis, in the beginning of excavating, the displacement of earth retaining wall appeared bigger in case of clay layer, but as excavating is in progress, the displacement of both compound soil layer and sand layer appeared big.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.139-146
• /
• 1997

In this study, centrifugal model tests were performed to investigate the behavior of excavated earth retaining wall with the depth of excavation and different types of wall(aluminum, steel panel). Jumunjin standard sand was used for foundation soil. The raining method was adopted to form the required relative density of the model ground. The lateral earth pressure measured from tests were compared with estimated active earth pressure by Rankine's theory. The test results have shown that the earth pressure acting on the retaining wall and the rotation displacement of the wall are influenced by the depth of excavation and the type of wall. It was found from the test results that the deformation of the wall increases with the depth of excavation.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.563-573
• /
• 2024

In this study, various countermeasures used to mitigate tunnel deformations due to nearby multi-propped basement excavation in soft clay are explored by three-dimensional numerical analyses. Field measurements are used to calibrate the numerical model and model parameters. Since concrete slabs can constrain soil and retaining wall movements, tunnel movements reach the maximum value when soils are excavated to the formation level of basement. Deformation shapes of an existing tunnel due to adjacent basement excavation are greatly affected by relative position between tunnel and basement. When the tunnel is located above or far below the formation level of basement, it elongates downward-toward or upward-toward the basement, respectively. It is found that tunnel movements concentrate in a triangular zone with a width of 2 H_e (i.e., final excavation depth) and a depth of 1 D (i.e., tunnel diameter) above or 1 D below the formation level of basement. By increasing retaining wall thickness from 0.4 m to 0.9 m, tunnel movements decrease by up to 56.7%. Moreover, tunnel movements are reduced by up to 80.7% and 61.3%, respectively, when the entire depth and width of soil within basement are reinforced. Installation of isolation wall can greatly reduce tunnel movements due to adjacent basement excavation, especially for tunnel with a shallow burial depth. The effectiveness of isolation wall to reduce tunnel movement is negligible unless the wall reaches the level of tunnel invert.