• Journal of Korean Society of Forest Science
• /
• v.20 no.1
• /
• pp.45-50
• /
• 1973

This study was investigated the methods of vegetative propagation for new Lespedeza varieties. Experimental matterials were used 6 Lespedeza species; L. maximowiczii, L. cyrtobotrya, L. angustifolioides, L. bicolor, L. maximowiczii var. tomentella, and L. japonica var. intermedia. In April a year branches were cut 15-20cm length and 3-4mm thickness and planted in sand bed (depth 150cm) to be sterilized by the 0.1% solution of Uspulun. And then the cutting beds were irrigated and shaded. The results are as follows. 1. The rooting rates of the cuttings could be found so variable among varieties from 69% of L. maximowiczii var. tomentella to 50.3% of L. japonica var. intermedia. 2. The growth performance showed statistically significant difference at 1% level among varieties. L. maximowiczii was the best, while L. japonica var. intermedia showed the wrost growth performance of them. 3. The average number of roots with more than 5 cm length per stock was revealed statistically significant difference at the 1% level among varieties from the greatest number of 6.4 of L. maximowiczii var. tomentella to the smallest number of 2.3 of L. japonica var. intermedia. 4. Total average length of the roots per stock was statistically significant so different at 1% level from the longest 279.8cm of L. maximowiczii var. tomentella to the shortest 41.1cm of L. japonica var. intermedia. 5. The average ndules with more than 1 mm in diameter per stock was statistically significant so different at 1% level among varieties from the greatest number of 34.4 of L. maximowcizii to the smallest numqer of 4.6 of L. japonica var. intermedia.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.580-586
• /
• 2000

Data collected between 1981 and 1991 at the Philippine Carabao Center at Central Luzon State University (PCC-CLSU) were used for the comparison of growth, milk yield and draughtability of Murrah-Philippine crossbred and Philippine native buffaloes. Body weights and body measurements were available at 3-month intervals from birth to 36 months of age for a total of 34 $Murrah{\times}Philippine$ native buffalo F1 crossbreds (CBB; 21 cows, 13 bulls) and 32 Philippine native buffaloes (PNB; 16 cows, 16 bulls). Lactation records were available for 14 CBB and 19 PNB cows. Data for draughtability under wet and dry ploughing conditions were available for 4 CBB and 4 PNB steers. The results indicate that crossbreds grow faster (0-9 months of age: cows $442{\pm}19$ vs. $301{\pm}21g/day$, bulls $305{\pm}23$ vs. $296{\pm}21g/day$; 9-36 months of age: cows $227{\pm}10$ vs. $147{\pm}12g/day$, bulls $282{\pm}13$ vs. $138{\pm}12g/day$), mature earlier and produce more milk (1st lactation: $1139{\pm}153$ vs. $450{\pm}112kg$; 2nd lactation: $1115{\pm}132$ vs. $488{\pm}136kg$) than native buffaloes, but have a poorer draughtability (wet ploughing; force as % of body weight $8.8{\pm}0.2$ vs. $12.2{\pm}0.6$; dry ploughing: cut depth $10.98{\pm}0.25$ vs. $11.92{\pm}0.13cm$, velocity $0.50{\pm}0.03$ vs. $0.60{\pm}0.02m/sec$, force as % of body weight $9.0{\pm}0.6$ vs. $11.3{\pm}0.7$). The correlation coefficients between body weight and body measurements at birth and at 3-month intervals indicate that heart girth has a relatively high correlation with body weight, especially in crossbreds. It is concluded that in Philippine smallholder farming systems in which meat and milk production are secondary to draught power, the native buffalo is preferable from the point of view of input needed to maintain the number of animals kept for a required draught force.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.6
• /
• pp.39-49
• /
• 2022

Purpose: As part of these efforts, in-depth research is needed on efficient and practical utilization of underground spaces and underground shopping malls. In addition, efforts are being made to find effective alternatives to various problems currently occurring in underground shopping malls, but it is not easy. In addition, the development entity and the maintenance entity are different from each other, and the management is not unified, making it difficult to maintain underground shopping malls. From this point of view, it can be said that it is time to actively and specifically discuss ways to revitalize underground shopping malls. Data and methodology: In the domestic distribution environment, traditional markets and shops are stagnating due to rapid changes in consumption patterns, such as the spread of large companies with advanced distribution techniques such as hypermarkets, shopping malls, and SCM, the rapid increase in Internet and home shopping, and the importance of convenience for young consumers. In order to revitalize underground shopping malls, it is necessary to strengthen the organization and self-rescue efforts of merchants' associations, change consciousness through merchant education, change to specialized markets, find nuclear stores and representative restaurants, and support the hardware sector. Results: The connection of underground shopping malls in each region of the country, where commercial districts are separated from each other, will also play an important role in reviving the function of the city in the future. To do this, it is first necessary to connect underground shopping malls that have been cut off. In other words, connection between connectable underground shopping malls should be promoted. Of course, long-term projects should be promoted step by step, and many consultations should be made on how to connect with the ground for each local government. Conclusion: This is because in the future, the underground space cannot just be a walking place, but another space of the Korean Wave where you can experience satisfying the five senses. K-shopping Hallyu content can be created by creating a characteristic story for each underground shopping mall in the city, permanently this story-oriented event, and creating a safe and elegant environment. If there is a story, so-called "Senomi Shopping" will be possible. A new Korean Wave will be created that can satisfy "the fun of writing, the fun of seeing, and the fun of feeling" at the same time.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.23-46
• /
• 2007

The purpose of this study was to present improvement directions of college scholastic ability test on industry department. Industry department test were classify and abstracted sampling test on contents and movement domain, analyzed example items of college scholastic ability test on industry department. Research methods used in this study were review of related literature, the item analysis and item pattern analysis between college scholastic ability test on introduction to industry and curriculum, contents of textbook. After finding a problem of developing items, trying to find a solution to the problem and developing an up-to-date method of items was to present improvement. Based on the result of the study, some recommendations for future researches were made as follows: First, a phenomenon of making same contents items over again and no making items not on made the items ever have to cut. Second, Time to read and make sense of items have to reduce because depend on the degree of difficulty related on time to understand of items. Third, the depth of textbook contents has to develop on curriculum this year. Fourth, the succeeding study on linkage between college scholastic ability test and simulation of college scholastic ability test. Fifth, verification validity on contents of new movement domain is developed new and striking test items.

• Trans-
• /
• v.7
• /
• pp.81-101
• /
• 2019

Interviews are so important and meaningful that it is the heart of the documentary. In narrative film, it is focused as the story discourse, whereas documentary is strong in disclosure, which consists of narration and interview. In a TV documentary, interviews use conventional shots repeatedly, whereas in a documentary film that targets a relatively large screen, the interviewer's Mise-en-scene should consider the aesthetic depth. , which released in 2017 and used the audience for the third time in documentary film history, tries to make 40% of the volume of the main volume equal to the same angle. In a TV documentary, it is not uncommon for an interview cut to exceed 30 seconds, and if it exceeds 1 minute, immersion is significantly lowered, so the a mount and compression of the interview disclosure is important for both the director and the audience. In the case of the interview sequence of , it was the key to communicate the sub-plot with a relatively focused with long discourse, which is at least 8 minutes and 30 seconds to a maximum of 11 minutes, in a way that allows the audience to communicate. Furthermore, it was produced after the death of the protagonist Roh Moo Hyun, with the limitation that the voice of the protagonist was excluded, and the voice of Roh Moo Hyun was indirectly reproduced through the surrounding characters. In this study, it covers the meaning and scope of interviews in the production of documentary, and the aesthetic applications of the Mise-en-scene.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.2
• /
• pp.299-313
• /
• 1990

The author analysed tomographic and cephalometric radiographs of 82 temporomandibular joints from 41 symptomatic patients and 40 temporomandibular joints from 20 asymptomatic young adults. The results were as follows; 1. The mean condylar angulation in control group and patient group was 21.72±6.48° 20.13±9.14° respectively and there was no significant difference between two groups. 2. The mean depth of cut was 6.63±0.38㎝ in control group and 6.57±0.46㎝ in patient group. 3. Mean height and width of condylar head were 6.66±1.83㎜, 12.42±0.49㎜ in control group and 6.22±1.36㎜, 11.93±l.92㎜ in patient group. 4. The mean height of articular fossa was 10.20±2.04㎜ in control group and 9.89±1.98㎜ in patient group. The mean width of articular fossa was 21.08±2.08㎜ in control group and 21.24±3.03㎜ in patient group. 5. In centric occlusion the superior joint space was largest (4.15±0.93㎜), followed by the posterior joint space (2.99±0.97㎜) and the anterior joint space (2.70±0.73㎜) in control group. The superior joint space (3.47±1.31㎜) and posterior joint space (3.47±7.07㎜) were same in patient group. There was significant difference in left superior joint spaces between two groups (p<0.05). 6. The condylar position in articular fossa was displaced anteroinferiorly (0.99±3.65㎜ anteriorly, 1.75±1.01㎜ inferiorly) in control group and posteroinferiorly (3.20±4.69㎜ posteriorly, 1.25±1.87㎜ inferiorly) in patient group with 1 inch opening. In maximum opening, it was displaced anteroinferiorly (6.09±3.55㎜ anteriorly, 1.38±2.47㎜ inferiorly) in control group and anteroinferiorly (1.70±5.96㎜ anteriorly, 1.37±1.85㎜ inferiorly) in patient group. There was significant difference in anteroposterior position of both condyles with 1 inch opening and maximum opening between two groups (p<0.01). 7. The mean inclination of upper central incisor and the posterior inclination of articular eminence in control group was 65.60±6.04° 58.88±9.18° in control group, and 67.14±8.41°, 59.70±9.08° in patient group respectively. There was no significant correlation between two groups.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.152-157
• /
• 2016

Root-dipping inoculation method has been used to investigate resistance of radish plants to Fusarium wilt. However, the method requires a lot of labor and time because of complicate procedure. This study was conducted to establish a simple and effective mass-screening method for resistant radish to Fusarium wilt. Radish seedlings of susceptible and resistant cultivars were used to investigate wounding method by scalpel, inoculum concentration, and pathogen-inoculated growth stage of seedlings. We established an efficient mass-screening method based on our results as following: Roots of 14-day-old seedlings of radish are cut with a scalpel at a $90^{\circ}$ angle to a 2 cm-depth at a 1 cm-distance from main stem and then inoculated by pouring with a 10 ml-aliquot of a fungal spore suspension ($1.0{\times}10^7conidia/ml$) on soil. The inoculated plants are cultivated in a growth room at $25^{\circ}C$ for about 4 weeks with 12-hour light a day. The proposed screening method enables to effectively select resistant from mass radish plants cultivars to Fusarium wilt.

• Korean Journal of Social Welfare
• /
• v.58 no.1
• /
• pp.115-141
• /
• 2006

The purpose of this study is to understand the changes from adopting daily two-shift roster in child care institutions. To accomplish this purpose, we collected data mainly from depth interview with managers, child care workers, and children in child care institutions adopting daily two-shift roster, and analysed these data through qualitative case study approach. The results of this study are as follows. First, child care workers take the chance of recreation, their working conditions improved, they were participated in self-development activity, and they could make relationship with persons in social network. But, some participants worried about decrease of responsibility of workers. Second, one hand, possibility of high-quality care for child is increased, on the other hand, possibility of improving attachment relationship between workers and children is decreased. some children is confused by shift. But, most important strength is that partners have complementary parenting roles through discussion about parenting skills. They have developed communication skills by trial and error, and growed with children through sharing. Third, many qualified persons have applied for institution because of improvement of working conditions, thus institutions had the chance of adopting qualified workers. These workers have various abilities and resources, could mobilize resources from community, and could progress various programs and intervene for children. But, institutions had many difficulties in process adopting daily two-shift roster because of unstable financial support and previous structure. Most of participants worried about that local government may cut down a subsidy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.6
• /
• pp.253-266
• /
• 2020

The extended slip-weakening model was investigated by using a compiled set of source-spectrum-related parameters, i.e. seismic moment M_o, S-wave velocity V_s, corner-frequency f_c, and source-controlled high-cut frequency fmax, for 113 shallow crustal earthquakes (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan from 1987 to 2016. The investigation was focused on the characteristics of stress drop, radiation energy-to-seismic moment ratio, radiation efficiency, and fracture energy release rate, G_c. The scaling relationships of those source parameters were also investigated and compared with those in previous studies, which were based on generally used singular models with the dimensionless numbers corresponding to f_c given by Brune and Madariaga. The results showed that the stress drop from the singular model with Madariaga's dimensionless number was equivalent to the breakdown stress drop, as well as Brune's effective stress, rather than to static stress drop as has been usually assumed. The scale dependence of stress drop showed a different tendency in accordance with the size category of the earthquakes, which may be divided into small-moderate earthquakes and moderate-large earthquakes by comparing to M_o = 10¹⁷~10¹⁸ Nm. The scale dependence was quite similar to that shown by Kanamori and Rivera. The scale dependence was not because of a poor dynamic range of recorded signals or missing data as asserted by Ide and Beroza, but rather it was because of the scale dependent V_r-induced local similarity of spectrum as shown in a previous study by the authors. The energy release rate G_c with respect to breakdown distance D_c from the extended slip-weakening model coincided with that given by Ellsworth and Beroza in a study on the rupture nucleation phase; and the empirical relationship given by Abercrombie and Rice can represent the results from the extended slip-weakening model, the results from laboratory stick-slip experiments by Ohnaka, and the results given by Ellsworth and Beroza simultaneously. Also the energy flux into the breakdown zone was well correlated with the breakdown stress drop, ${\tilde{e}}$ and peak slip velocity of the fault faces. Consequently, the investigation results indicate the appropriateness of the extended slip-weakening model.