• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.31-42
• /
• 2000

본 연구에서는 심해(<220m)에 설치된 개단말뚝, 폐단 말뚝, 관내토 선단 하부지반 그라우팅말뚝에 대한 압력토조 모형 실험을 수행하여 해진에 대한 안정성을 연구하였으며, 각각의 경우 단일말뚝, 2개 및 4개 군말뚝에 대하여 실험을 수행하였다. 해진시 단일개단말뚝의 지지력은 말뚝의 지중관입 깊이에 의해 영향을 받았으나, 개단 군말뚝에서는 극히 짧은 (7m)관입깊이를 모델링한 경우를 제외하면 안정하였다. 또한, 단일폐단말뚝과 폐단군말뚝에서는 극히 짧은 97m) 관입깊이를 모델링한 경우만을 제외하면 안정을 유지하였다. 그러나, 13m의 지중관깊이를 모델링한 단일 그라우팅 말뚝의 지지력은 가변상태를 유지하였고, 20m의 관입깊이를 모델링한 그라우팅 군말뚝은 안정하였다.심해에 설치된 개단강관말뚝의 관내토와 선단 하부지반을 그라우팅함으로서 해진에 의한 관내토폐색의 파괴를 막을 수 있다는 것을 확인하였으며, 폐단 말뚝은 개단 강관 말뚝보다 해진에 대해 안정하다는 것을 확인하였다.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.25-29
• /
• 1984

In order to investigate the predominant factors which determine penetration depth and bead width in electron beam welding, bead-on-plate welding was carried out using 7075-T6 Al alloy. The results obtained from the present experiments can be summarized as follows; 1) With increasing accelerating voltage, bead width (B.W) decreases but penetration increases remarkably. 2) Increasing beam current results in increase of bead width and penetration respectively, and decrease of the ratio of penetration increment to beam current increment. 3) With increasing welding speed penetration decreases remarkably, while bead width creases.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.143-152
• /
• 2009

본 연구의 목적은 현재 국내에서 적용되고 있는 동결지수와 동결깊이 산정의 타당성을 검증하는 것이다. 이에 국내에서 운영되고 있는 LTPP-SPS(Long Term Pavement Performance- Specific Pavement Study)구간의 대기온도와 포장체 깊이별 온도 데이터를 이용하여 동결지수와 동결깊이를 산정하였으며, 기존 계산식을 이용하여 산출된 동결깊이와 비교 분석하였다. 또한 이 구간들의 인근 측후소 데이터를 이용하여 연도별 동결지수 추이를 분석하였다. 본 연구 결과, 지구온난화에 의해 1987년 이후에는 동결지수가 급격히 감소하였으며, 현재 도로설계 시 적용되고 있는 동결지수가 과하게 적용되고 있음을 알 수 있었다. 이에 동결지수 산정 시 현행 30년 데이터를 토대로 산정하기보다 기후가 변화된 시점부터 현재까지의 추이를 분석하는 것이 바람직 할 것으로 사료된다. 또한 LTPP-SPS 구간에서 측정된 포장체 깊이별 온도데이터를 분석한 결과, 동상방지층이 설계되어 있는 3개구간에서 대체적으로 보조기층까지만 동결이 발생하는 것으로 나타나, 동상방지층이 제 역할을 수행하지 못하는 것으로 나타났다. 실제 측정된 동결깊이와 계산식을 통해 산정된 동결깊이를 비교한 결과, 노상동결관입허용법을 이용한 설계방법이 실제 측정된 동결깊이와 가장 유사한 경향을 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.25-31
• /
• 2019

본 연구는 콘크리트 내부 공극 및 계면 사이에 깊게 침투가 가능한 실란복합화합물을 기반으로한 표면보호재 (Silane Surface Protection Material, SSPM)를 사용한 기존 콘크리트 내구성 향상 방안 도출을 위해 실시되었다. SSPM을 적용한 모르타르의 미세구조 평가, 잔골재의 입도 분포에 따른 침투깊이 및 공극량을 측정하였다. 그 결과 모르타르 내부에 액상 및 크림형질의 SSPM이 침투된 것으로 나타났으며, 공극량 평가결과 잔골재의 입도분포에 관계없이 SSPM을 적용하였을 때 공극량이 감소하는 것으로 나타났다. 침투깊이 평가결과 잔골재의 입도분포에 관계없이 SSPM 도포량이 증가함에 따라 침투깊이가 증가하는 것으로 나타났으며, 공극량이 상대적으로 많은 일반잔골재(Type 2)로 제작한 모르타르의 침투깊이가 적게 나타났다. 콘크리트에 적용할 경우 침투깊이는 다소 감소할 것으로 판단되나, 콘크리트 표면에 침투하여 내구성을 향상 시길 수 있을 것으로 판단된다.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.29-33
• /
• 2011

Experimental studies were performed to investigate the injury potential of BB pellets through gelatine based simulants. In order to record BB pellet movements penetrating into the target simulant, a high-speed video camera was used. In this study the first investigation involved the effects on concentrations, homogeneity and gelation times of the gelatine simulant. The second investigation involved the penetration depth of the pellets to the simulant by different distances between the BB gun and the simulant. The final one is associated with impact velocity, threshold velocity and penetration depth of the pellets by different kinetic energies of the BB gun. Results provided the basis in assessing the injury potential of BB pellets.

• International Journal of Contents
• /
• 제5권2호
• /
• pp.16-19
• /
• 2009

In this paper, we concern about the distribution characteristics of surface temperature by the increment of time, diffusivity and heat flux on irradiating of a laser. The penetration depth corresponding to the induced constant heat flux or irradiated laser, is simulated by a computer algorithm. The distribution of temperature versus penetration depth for the variation of time and diffusivity is characterized at the constant heat flux and on irradiating of a laser. The temperature of constant heat flux at the fixed diffusivity or time, is decreased by the pattern of exponential function as the time t or diffusivity a is increased (a=10, 100, 1000). The temperature of constant heat flux is not changed but exponentially fixed with the increasing diffusivity and the fixed time. On the other hand, the temperature of laser at the fixed diffusivity or time is decreased linearly. Our results show that the characteristics of the simulated surface temperature in a semi-infinite solid are similar to the graphs on theoretical consideration.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.463-478
• /
• 2020

Multiple mathematical modeling for prediction of slump, compressive strength and depth of water penetration at 28 days were performed using statistical analysis for the concrete containing waste limestone powder as partial replacement of sand obtained from experimental program reported in this research. To extract experimental data, 180 concrete cubic samples with 20 different mix designs were investigated. The twenty non-linear regression models were used to predict each of the concrete properties including slump, compressive strength and water depth penetration of concrete with waste limestone powder. Evaluation of the models using numerical methods showed that the majority of models give acceptable prediction with a high accuracy and trivial error rates. The 15-term regression models for predicting the slump, compressive strength and water depth were found to have the best agreement with the tested concrete specimens.

• 한국가구학회지
• /
• 제18권4호
• /
• pp.282-286
• /
• 2007

An experiment was conducted to compare the 1% safranine solution flow depth in radial and longitudinal direction of Prunus sargentii. Longitudinal flow of safranine solution was found higher than radial flow. Body ray parenchyma was found more permeable than marginal ray parenchyma and it was about 1.3 times higher. Intercellular space conducted safranine solution more than ray parenchyma. Vessel was found to be the main avenue for liquid conduction in longitudinal direction. Different anatomical features of ray, vessel and fiber affected the penetration depth of safranine solution. Moreover initial penetration depth was found to be high and thereafter decreased gradually.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.20-24
• /
• 2012

Experimental studies were performed to investigate the eye injury risks by different BB pellet materials. Four different BB pellet materials were used: plastic (P), silicon (S), rubber (R) and plastic covered with silicon (SR). The BB pellet images penetrating into the gelatine simulant were recorded by a high-speed video camera. The results obtained from the different pellet materials were discussed in terms of impact velocity and penetration depth; threshold velocity and projectile sectional density; eye injury risks by normalized energies. It was found that the P pellets caused higher impact velocity while the lower was SR pellets. The penetration depth and threshold velocity of the pellets were dependent on the impact velocity of the pellets, and the P pellets resulted in the higher eye injury risk while the lower was SP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2203-2204
• /
• 2006

When the coil with alternating current approaches to the conductor the eddy current flows in conductor. Eddy current is concentrated on the conductor surface and decrescent because of skin effet.. In this paper investigated eddy current characteristic that is happened in conductor. Analyzed characteristic using electromagnetic field finite element analysis program that is commercialized to analyze value of eddy current and penetration depth. Analyzed creation value of eddy current and penetration depth in conductor that change operation frequency and the material of conductor, coil outside diameter, inside diameter, position, type of conductor from analyzed eddy current characteristic. The results. using distribution of eddy current and penetration depth data is that will help to forecast ECT(Eddy Current Testing), Eddy current application and use field, eddy current loss.