• Journal of the Korean earth science society
• /
• v.37 no.5
• /
• pp.277-285
• /
• 2016

We introduce a depth scaling strategy to improve the accuracy of frequency-domain elastic full waveform inversion (FWI) using the new pseudo-Hessian matrix for seismic data without low-frequency components. The depth scaling strategy is based on the fact that the damping factor in the Levenberg-Marquardt method controls the energy concentration in the gradient. In other words, a large damping factor makes the Levenberg-Marquardt method similar to the steepest-descent method, by which shallow structures are mainly recovered. With a small damping factor, the Levenberg-Marquardt method becomes similar to the Gauss-Newton methods by which we can resolve deep structures as well as shallow structures. In our depth scaling strategy, a large damping factor is used in the early stage and then decreases automatically with the trend of error as the iteration goes on. With the depth scaling strategy, we can gradually move the parameter-searching region from shallow to deep parts. This flexible damping factor plays a role in retarding the model parameter update for shallow parts and mainly inverting deeper parts in the later stage of inversion. By doing so, we can improve deep parts in inversion results. The depth scaling strategy is applied to synthetic data without lowfrequency components for a modified version of the SEG/EAGE overthrust model. Numerical examples show that the flexible damping factor yields better results than the constant damping factor when reliable low-frequency components are missing.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.501-511
• /
• 2001

Several indices have been developed that use bleeding and color changes as indicators of early gingival pathology. In the presence of gingivitis, vascular proliferation and reduction of keratinization owing to increase redness in gingiva. Descriptions of healthy gingiva are numerous, ranging from pale pink and coral pink to deep red and violet. This terms are not objective. Because of perception of color depends on a lot of factors such as light source, object, observer and so on. It is difficult to make an objective expression. Therefore the using of mechanical equipment is recommended to exclude these variables and observer's vias. The purpose of this study was to evaluate gingival color change after scaling & subgingival root planing. The other purpose of this study was to research the correlation of pocket depth, P.B.I. score and gingival color change. After photo-taking and storaging the image of gingival color into a computer, color change was examine with an image analysis program. Results were as follow; 1. Color of healed gingiva after scaling & subgingival root planing was significantly differ from color of inflamed gingiva(p<0.01). 2. Color of healed gingiva after scaling was similar to color of healed gingiva after subgingival root planing(p<0.05). 3. There was statistically significant correlation between color change of red component and pocket depth after scaling & subgingival root planing(p<0.01). 4. There was no correlation between color change of green, blue component and pocket depth after scaling & subgingival root planing(p<0.01). 5. There was statistically significant correlation between between color change of red component and P.B.I. score after scaling & subgingival root planing(p<0.01). 6. There was no correlation between color changes of green, blue component and P.B.I. score after scaling & subgingival root planing(p<0.01). 7. Increase of pocket depth and P.B.I. score were significantly correlated to the amount of color change(p<0.01). 8. P.B.I. score had a higher correlation with color change than pocket depth(p<0.01).

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.796-803
• /
• 2008

In this paper, we present a depth scaling method for multiview images that could provide an 3D depth that a user prefers. Unlike previous works that change a camera configuration, the proposed method utilizes depth data in order to carry out the scaling of a depth range requested by users. From multivew images and their corresponding depth data, depth data is transformed into a disparity and the disparity is adjusted in order to control the perceived depth. In particular, our method can deal with multiview images captured by multiple cameras, and can be expanded from stereoscopic to multiview images. Based upon a DSCQS subjective evaluation test, our experimental results tested on an automultiscopic 3D display show that the perceived depth is appropriately scaled according to user's preferred depth.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.255-259
• /
• 2002

To reduce the uncertainty in the calibration of radiation beams, absorbed dose to water for high energy electrons is recommended as the standards and reference absorbed dose by AAPM Report no.51 and IAEA Technical Reports no.398. In these recommendations, water is, defined as the reference medium, however, the water substitute solid phantoms are discouraged. Nevertheless, when accurate chamber positioning in water is not possible, or when no waterproof chamber is available, their use is permitted at beam qualities R$\_$50/ < 4 g/cm$^2$ (E$\_$0/ < 10 MeV). For the electron dosimetry using solid phantom, a depth-scaling factor is used for the conversion of depth in solid phantoms to depth in water, and a fluence-scaling factor is used for the conversion of ionization chamber reading in plastic phantom to reading in water. In this work, the properties, especially depth-scaling factors c$\_$p1/ and fluence-scaling factors h$\_$pl/ of several commercially available water substitute solid phantoms were determined, and the electron dosimetry using these scaling method was evaluated. As a result, it is obviously that dose-distribution in solid phantom can be converted to appropriate dose-distribution in water by means of IAEA depth-scaling.

• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.505-516
• /
• 2016

This paper evaluates the scaling of ground motions recorded from nine intermediate-depth earthquakes produced in the Vrancea seismic zone in Romania. The considered ground motion database consists of 363 horizontal recordings obtained on soil classes B and C (according to Eurocode 8). An analysis of the inter- and intra-event spectral accelerations is performed in order to gain information regarding the magnitude and distance scaling of the Vrancea ground motions. The analyses reveal a significant influence of the earthquake magnitude and focal depth on the distance scaling and different magnitude and distance scaling for the two soil classes. A linear magnitude and distance scaling is inferred from the results for the range of magnitudes $5.2{\leq}M_W{\leq}7.1$. The results obtained are checked through stochastic simulations and the influence of the stress drop and kappa values on the ground motion levels is assessed. In addition, five ground motion models which were tested in other studies using recordings from Vrancea earthquakes are analyzed in order to evaluate their corresponding host stress drop and kappa. The results show generally a direct connection between the host kappa values and the host stress drop values. Moreover, all the ground motion models depict magnitude dependent host kappa and stress drop levels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.1
• /
• pp.13-21
• /
• 2016

The vertical distributions of aerosol extinction coefficient were estimated using the scaling height retrieved at Gwangju, Korea ($35.23^{\circ}N$, $126.84^{\circ}E$) during a spring season (March to May) of 2009. The aerosol scaling heights were calculated on a basis of the aerosol optical depth (AOD) and the surface visibilities. During the observation period, the scaling heights varied between 3.55 km and 0.39 km. The retrieved vertical profiles of extinction coefficient from these scaling heights were compared with extinction profile derived from the Light Detection and Ranging (LIDAR) observation. The retrieve vertical profiles of aerosol extinction coefficient were categorized into three classes according to the values of AODs and the surface visibilities: (Case I) the AODs and the surface visibilities are measured as both high, (Case II) the AODs and the surface visibilities are both lower, and (Others) the others. The averaged scaling heights for the three cases were $3.09{\pm}0.46km$, $0.82{\pm}0.27km$, and $1.46{\pm}0.57km$, respectively. For Case I, differences between the vertical profile retrieved from the scaling height and the LIDAR observation was highest. Because aerosols in Case I are considered as dust-dominant, uplifted dust above planetary boundary layer (PBL) was influenced this discrepancy. However, for the Case II and other cases, the modelled vertical aerosol extinction profiles from the scaling heights are in good agreement with the results from the LIDAR observation. Although limitation in the current modelling of vertical structure of aerosols exists for aerosol layers above PBL, the results are promising to assess aerosol profile without high-cost instruments.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.529-540
• /
• 1994

Rapidly progressive periodontitis is known to be usually associated with systemic problems and improved with antibiotic therapy. Recent experiments in which bioresorbable polycaprolactone was polymerized with minocycline has shown that the system released effective antibiotic concentration during the 7 days' period. This clinical trial was to compare the efficacy of a minocycline film(poly-caprolactone+polyglycol+10% minocycline) insertion plus supragingival scaling(MS) or subgingival scaling & root planing(MSRP) with the scaling(S) or subgingival scaling & root planing alone(SRP), at improving the periodontal condition in RPP. Fifteen patients were examined for plaque accumulation, gingival inflammation, probing depth and attachment loss at baseline, then 1, 2, 4 and 8 weeks after 4 treatment regimens were randomly undergone in 4 comparable sites(PD>5mm, LA>3mm) in each subject. Results revealed statistically significant treatement effect with a reduction in a probing depth in SRP(2.0mm), MS(1.8mm), and MSRP(2.1mm). There was no significant reduction in the supragingival scaling alone group(0.6mm). Similarly, attachment levels were significantly improved in the SRP(1.5mm), MS(2.0mm) and MSRP(2.0mm) groups. Net % BOP reduction at 8 week compared to baseline was 6.7% (S), 26.7% (MS), 26.7% (SRP), and 33.3% (MSRP). MSRP produced the greatest improvement in BOP at 8 week. This data suggests that a subgingival minocycline delivery system as a adjunct to scaling alone or scaling & root planing may produce significant clinical benefits over scaling alone in rapidly progressive periodontitis patients.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.371-376
• /
• 1998

This study presents an evaluation of the effectiveness of nonsurgical subgingival scaling and root planing related to initial pocket depth, type of teeth, and individual root surfaces. A total of 110 teeth designated for periodontal surgery in 67 patients with marginal periodontitis were selected and received thorough scaling and root planing with standard rigid Gracey curettes. After a healing period of 4 to 8 weeks, residual calculus was assessed at the time of periodontal surgery following the reflection of mucoperiosteal flap. The results demonstrated a high correlation between the percentage of residual calculus and initial pocket depth. It was further noted that tooth type and involved root surface also influenced the rate of calculus remnant. The results of this study suggest that complete removal of subgingival calculus utilizing conventional instrumentation via closed approach is rare.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.161-166
• /
• 2008

In general structures, cleavage fracture may develop under the low constraint condition of larger scale yielding with a shallow surface crack. However, standard procedures for fracture toughness testing require very severe restrictions of specimen geometry. So the standard fracture toughness data makes the integrity assessment irrationally conservative. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with varying crack depth, The constraint effects on the crack depth ratios are quantitatively evaluated by scaling model and Weibull stress method using 3-D finite clement method, After correction of constraint loss due to shallow crack depths, the statistical size effect are also corrected according to the standard ASTM E 1921 procedure, The results snowed a good agreement in the geometry correction regardless of the crack size, while some over-corrections were observed in the corrected values of $T_0$.