• Animal Bioscience
• /
• v.35 no.6
• /
• pp.916-926
• /
• 2022

Objective: This study was conducted to evaluate the effects of medium chain triglycerides (MCT) with organic acids (OA) on growth performance, fecal score, blood profiles, intestinal morphology, and nutrient digestibility in weaning pigs. Methods: A total of 120 weaning pigs ([Yorkshire×Landrace]×Duroc) with an average body weight (BW) of 8.00±0.87 kg were assigned in five treatments considering sex and initial BW in 3 replications with 8 pigs per pen in a randomized complete block design. The experimental diets included a corn-soybean meal based basal diet with or without 0.1% or 0.2% MCT and 0.1% OA. The pigs were fed the diets for 5 weeks (phase 1, 0 to 2 weeks; phase 2, 3 to 5 weeks). A total of 15 barrows with an average BW of 12.48±0.37 kg were used to evaluate the nutrient digestibility by total collection method. The BW and feed intake were measured at the end of each phase. Blood samples and small intestine samples were collected at the end of each phase, too. Results: Supplementing 0.1% MCT with 0.1% OA showed greater BW for week 5 and average daily gain (ADG) for overall period than control diet. Supplementing 0.1% MCT increased (p<0.05) ADG and improved (p<0.05) gain:feed ratio for phase 1. Dietary MCT and OA did not affect the fecal score and blood concentration of cortisol, immunoglobulin G, tumor necrosis factor-α, interleukin-1β (IL-1β), IL-6, and IL-10 in weaning pigs. Pigs fed the diets with 0.1% MCT had greater (p<0.05) villus height of duodenum and ileum for phase 1. Also, pigs fed the diet with 0.1% OA showed greater (p<0.05) villus height and villus height to crypt depth ratio of duodenum for phase 2. There was no significant difference in nutrient digestibility and nitrogen retention of pigs. Conclusion: Addition of 0.1% MCT with 0.1% OA in weaning pig's diet improved growth performance partly by enhancing intestinal morphology in weaning pigs.

• Journal of Korean Elementary Science Education
• /
• v.41 no.3
• /
• pp.553-568
• /
• 2022

This study investigated the level of academic passion for elementary school teachers' science pedagogical content knowledge (PCK) and examined the factors that influence the passion. To this end, 161 elementary school teachers in Seoul were selected, and academic passion tests were then administered to evaluate their academic passion for science subject matter knowledge and science pedagogical knowledge. Individual in-depth interviews were also conducted with some of the participating teachers. The results revealed that 'importance' and 'harmonious passion' for learning science subject matter knowledge and science pedagogical knowledge were found at a high level. However, 'time/energy investment' and 'obsessive passion' for learning the knowledge were slightly higher or lower than normal. The 'like' for learning science subject matter knowledge was relatively high, but the 'like' for learning science pedagogical knowledge was slightly higher than normal. The differences in academic passion for science subject matter knowledge and science pedagogical knowledge were greater according to advanced major at undergraduate than teaching career. The teachers evenly selected some factors that influenced their academic passion for science subject matter knowledge and science pedagogical knowledge. These identified characteristics included 'individual interest', 'high school track', 'experience in advanced major at undergraduate', 'experience in science-related graduate school', 'experience teaching science in elementary school', 'experience teaching science at the gifted education institute', 'experience in charge of science subject teacher', 'experience in science-related teacher training', 'experience in developing science-related teaching and learning materials', 'experience in charge of science or science-gifted related work', and 'experience in a science-related teacher community'. However, a slight difference was noted in the selection ratio depending on advanced major at undergraduate. Based on these results, the practical implications for improving their academic passion for science PCK are suggested.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.15-25
• /
• 2023

The effects of forest fires on the activity of microbial communities in topsoil and subsoil were investigated. Samples were collected from Korean forest soils comprising mainly igneous and sedimentary rocks. Analysis of beta-glucosidase, found higher microbial activity in sedimentary rocks than in igneous rocks. Enzyme activity was not observed immediately after fire, but was restored over time. The enzyme activity of subsoil was inhibited by 33~46% compared with that in the topsoil, regardless of soil damage. The effect of fire on the availability of microbial substrate was investigated using EcoPlate. The percentages of average well color development values of damaged and normal topsoil were 52.7~56.8% and 62.3~83.6%, respectively. Forest fires appear to affect the diversity and substrate availability of the subsoil microbial community by accelerating the decomposition of soil organic matter. The Shanon index, representing microbial biodiversity, was high in the topsoil of all samples; it was higher for soil microorganisms in sedimentary rocks than in igneous rocks, and higher in topsoil than in subsoil.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.160-166
• /
• 2023

The effects of punching treatment on mycelial culture and fruiting body productivity were investigated in a new Lentinula edodes cultivar, "Jadam", in sawdust medium for the stable production of oak mushroom. As the punching volume and number increased, the weight loss rate and color difference increased and the L value decreased. After spawn inoculation, the sawdust medium temperature and CO₂ concentration reached their highest values at 33 and 19 days of incubation, respectively. The O₂ concentration showed the lowest value on the 14^th day of incubation, which was the opposite pattern to the CO₂ concentration. As the punching volume and the number increased, the medium temperature and O₂ concentration increased, and the CO₂ concentration decreased. Higher punching volumes and numbers resulted in higher temperatures and lower CO₂ concentrations. The best fruiting body yield was 5 × 70 mm - 30 (punching diameter × depth - number), and the total yield after three cycles was 644.7 g.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2935-2940
• /
• 2023

A polystyrene phantom was developed following the guidance of the International Atomic Energy Association (IAEA) for gamma knife (GK) quality assurance. Its performance was assessed by measuring the absorbed dose rate to water and dose distributions. The phantom was made of polystyrene, which has an electron density (1.0156) similar to that of water. The phantom included one outer phantom and four inner phantoms. Two inner phantoms held PTW T31010 and Exradin A16 ion chambers. One inner phantom held a film in the XY plane of the Leksell coordinate system, and another inner phantom held a film in the YZ or ZX planes. The absorbed dose rate to water and beam profiles of the machine-specific reference (msr) field, namely, the 16 mm collimator field of a GK Perfexion^TM or Icon^TM, were measured at seven GK sites. The measured results were compared to those of an IAEA-recommended solid water (SW) phantom. The radius of the polystyrene phantom was determined to be 7.88 cm by converting the electron density of the plastic, considering a water depth of 8 g/cm². The absorbed dose rates to water measured in both phantoms differed from the treatment planning program by less than 1.1%. Before msr correction, the PTW T31010 dose rates (PTW Freiberg GmbH, New York, NY, USA) in the polystyrene phantom were 0.70 (0.29)% higher on average than those in the SW phantom. The Exradin A16 (Standard Imaging, Middleton, WI, USA) dose rates were 0.76 (0.32)% higher in the polystyrene phantom. After msr correction factors were applied, there were no statistically significant differences in the A16 dose rates measured in the two phantoms; however, the T31010 dose rates were 0.72 (0.29)% higher in the polystyrene phantom. When the full widths at half maximum and penumbras of the msr field were compared, no significant differences between the two phantoms were observed, except for the penumbra in the Y-axis. However, the difference in the penumbra was smaller than variations among different sites. A polystyrene phantom developed for gamma knife dosimetry showed dosimetric performance comparable to that of a commercial SW phantom. In addition to its cost effectiveness, the polystyrene phantom removes air space around the detector. Additional simulations of the msr correction factors of the polystyrene phantom should be performed.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.82-82
• /
• 2003

Introduction: With the development of dose calculation algorithms for electron beams, 3D RTP systerns are available for electron beam dose distribution commercially. However, no studies evaluated the accuracy of dose calculation with ADAC Pinnacle system for electron beams. So, the accuracy of the ADAC system is investigated by comparing electron dose distributions from ADAC system against the BEAMnrc/DOSXYZnrc. Methods: A total of 33 breast cancer patients treated with 6, 9, and 12MeV electrons in our institution was selected for this study. The first part of this study is to compare the dose distributions of measurement, TPS and the BEAMnrc/DOSXYZnrc code in flat water phantom at gantry zero position and for a 10 ${\times}$ 10 $\textrm{cm}^2$ field. The second part is to evaluate the monitor unit obtained from measurement and TPS. Adding actual breast patient's irregular blocks to the first part, monitor units to deliver 100 cGy to the dose maximum (dmax) were calculated from measurement and 3D RTP system. In addition, the dose distributions using blocks were compared between TPS and the BEAMnrc/DOSXYZnrc code. Finally, the effects of tissue inhomogeneities were studied by comparing dose distributions from Pinnacle and Monte Carlo method on CT data sets. Results: The dose distributions calculated using water phantom by the TPS and the BEAMnrc/ DOSXYZnrc code agreed well with measured data within 2% of the maximum dose. The maximum differences of monitor unit between measured and Pinnacle TPS in flat water phantom at gantry zero position were 4% for 6 MeV and 2% for 9 and 12 MeV electrons. In real-patient cases, comparison of depth doses and lateral dose profiles calculated by the Pinnacle TPS, with BEAMnrc/DOSXYZnrc code has generally shown good agreement with relative difference less than +/-3%. Discussion: For comparisons of real-patient cases, the maximum differences between the TPS and BEAMnrc/DOSXYZnrc on CT data were 10%. These discrepancies were due in part to the inaccurate dose calculation of the TPS, so that it needs to be improved properly. Conclusions: On the basis of the results presented in this study, we can conclude that the ADAC Pinnacle system for electron beams is capable of giving results absolutely comparable to those of a Monte Carlo calculation.

• Journal of Korean Elementary Science Education
• /
• v.42 no.1
• /
• pp.1-16
• /
• 2023

This study investigated the level of academic passion for pre-service elementary teachers' science pedagogical content knowledge (PCK) and the factors that influence the passion. To this end, 182 first to fourth grade students in advanced non-science majors who were taking science-related courses in the second semester were selected, and two tests were then administered to evaluate their academic passions for science subject matter knowledge and science pedagogical knowledge. Individual in-depth interviews were also conducted with some of the participants. It was found that the factors such as "importance" and "harmonious passion" for learning science subject matter knowledge and science pedagogical knowledge were found at a high level. On the other hand, the factors such as "like" and "investment of time and energy" were slightly higher than normal, and the factor such as "obsessive passion" was slightly lower than normal. The differences in academic passion for science subject matter knowledge and science pedagogical knowledge were greater according to the high school track than the grade. The pre-service elementary teachers selected more often the factors such as "individual interests", "high school track", "contents of science-related courses at the university of education", "characteristics of professor in charge of science-related courses at the university of education", and "experience in teaching practicum" as the factors that influenced their academic passion for science subject matter knowledge and science pedagogical knowledge. However, there was a slight difference in the selection ratio depending on the high school track.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.27-40
• /
• 2006

Damage of cut-and-cover tunnel lining can be attributed to physical and mechanical factors. Physical factors include material property, reinforcement corrosion, etc. while mechanical factors include underground water pressure, vehicle loads, etc. This study is limited to the modeling of rigid circular cut and cover tunnel constructed at a depth of $1.0{\sim}1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. In this study, only damages due to mechanical factors in the form of additional loads were considered. Among the different types of additional, excessive earth pressure acting on the cut-and-cover tunnel lining is considered as one of the major factors that induce deformation and damage of tunnels after the construction is completed. Excessive earth pressure may be attributed to insufficient compaction, consolidation due to self-weight of backfill soil, precipitation and vibration caused by traffic. Laboratory tunnel model tests were performed in order to determine the earth pressure acting on the tunnel lining and to investigate the applicability of existing earth pressure formulas. Based on the difference in the monitored and computed earth pressure, a factor of safety was recommended. Soil deformation mechanism around the tunnel was also presented using the picture analysis method.

• The Journal of Internal Korean Medicine
• /
• v.44 no.2
• /
• pp.167-177
• /
• 2023

Background: Pressure injuries are localized areas of damage to the skin and/or underlying tissue, usually over a bony prominence due to pressure. Cerebrovascular disease increases the risk of pressure injuries due to the immobility caused by physical paralysis. The general approach to managing a patient with pressure injuries should include pain relief, the treatment of the infection, optimizing nutritional intake, proper positioning, and contamination prevention. Nonetheless, the duration of treatment for pressure injuries varies from person to person. Case report: An 80-year-old female intracerebral hemorrhage patient developed a pressure injury. To improve the injury faster, a Radix Astragali pharmacoacupuncture solution was applied to the pressure sore. The pressure injury's width, length, and depth was assessed using a ruler, and the exudate amount and tissue types were assessed. The treatment was performed for 35 days. The rate at which the size of the pressure sore lessened increased since the Radix Astragali pharmacoacupuncture solution was applied to the pressure sore. In addition, the tissue type of the pressure injury improved, and the exudates decreased. There was no significant difference in the Pressure Ulcer Scale for Healing Tool 3.0, since the Radix Astragali pharmacoacupuncture solution was applied to the pressure injury. Conclusion: This clinical case study suggests that the Radix Astragali pharmacoacupuncture solution might be effective in speeding up the healing of pressure injuries.

• SUVANNABHUMI
• /
• v.2 no.1
• /
• pp.55-94
• /
• 2010

Even Faxian(法顯)'s Gaosengfaxianchuan (『高僧法顯傳』) and Iching(義淨)'s Nanhaijiguineifachuan (『南海寄歸內法傳』) are regarded as very important and useful documents to study the southeast asian buddhist culture, it is very difficult to grasp the contemporary state of those area because their descriptions are very brief and implicit. Therefore this essay aimed an in-depth reading their documents as original texts of modern understanding of those area, and tried to make a new views to approach the southeast asian buddhist culture by some more historically and concretely. At the early 5th century when Faxian(法顯) arrived, Buddhism was flourished in Sri Lanka. Because already a long time passed since the Saṇgha was schismatized into conservative and progressive at around the dominical year, he mentioned nothing about the conflict or disharmony of two orders. And the faith of Buddha tooth relic, which had been uprisen at 50 years ago from Faxian's visiting, was concretely established as a representative religion of Sri Lanka. According to his record, the carrying ritual of this Buddha tooth was performed very magnificently as similar with recent Korean Youngsan ceremony(靈山齋). In the mean time, it looks there were many sculptures of Buddha image made of precious stone of special product from Sri Lanka. The faith of Buddha-pāda(the Buddha's foot-prints) was also generalized at that time. The most famous monk of his contemporary Sir Lanka was Buddhaghosa, the author of Visuddhi-magga, but it is not sure that Faxian had met him. It can be suspected that the funeral in which Faxian participated could be belonged to him, or the Visuddhi-magga was writing at the peak during Faxian's staying. On the way to return to China, Faxian embarked an indigenous ship around Indonesia. It means there were no chinese trade ship which he can use. So the trade between china and southeast asia was advanced by south asian ships, and the chinese ships were not yet joined at that time so activity. And at least until that time, it looks there were no any remarkable buddhist movement in the southeast asian countries by where he stopped. In contrast, the southeast asian world which be seen by Iching had already experienced a lot of changes. He was impressed by the high quality buddhist culture of those area, and insisted to accept it to china. Further, he analyzed the sects of buddhism which were prevalent around the southeast asia in his contemporary time, and tried to make a good relationship with each native monks for learning from them. It looks the center of those exchanges may be Śrīvijaya of Indonesia. He also mentioned the situation of the late 7th century's Funan(扶南) in Cambodia. At that time, the buddhist Saṇgha was oppressed by newly rising Khmer(眞臘). On the other hand, he described the points of sameness and difference in detail between Indian and southeast asian buddhist culture in the field of ritual as like the practical use of garments, buddha images, and daily recited scriptures. There must be a lot of another aspects which this essay couldn't gather up or catch from these documents. Nevertheless, I hope this essay can help the researchers of this field and will wait for any advices and comments from them.