• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.596-610
• /
• 2023

Focusing high marble deposition, Hanwoo feedlot system uses high-energy diet over the prolonged fattening period. However, due to the individual genetic variation, around 40% of them are graded into inferior quality grades (QG), despite they utilized the same resources. Therefore, focusing on development of a nutrigenomic based precision management model, this study was to evaluated the response to the divergent selection on genetic merit for marbling score (MS), under different dietary total digestible nutrient (TDN) levels. Total of 111 calves were genotyped and initially grouped according to estimated breeding value (high and low) for marbling score (MS-EBV). Subsequently, managed under two levels of feed TDN%, over the calf period, early, middle, and final fattening periods following 2 × 2 factorial arrangement. Carcasses were evaluated for MS, Back fat thickness (BFT) and Korean beef quality grading standard. As the direct response to the selection was significant, the results confirmed the importance of initial genetic grouping of Hanwoo steers for MS-EBV. However, dietary TDN level did not show an effect (p > 0.05) on the MS. Furthermore, no genetic-by-nutrition interaction for MS (p > 0.05) was also observed. The present results showed no correlation response on BFT (p > 0.05), which indicates that the selection based on MS-EBV can be used to enhance the MS without undesirable effect on BFT. Ultimate turnover of the Hanwoo feedlot operation is primarily determined by the QGs. The present model shows that the initial grouping for MS-EBV increased the proportion of carcasses graded for higher QGs (QG1⁺⁺ and QG1⁺) by approximately 20%. Moreover, there appear to be a potential to increase the proportion of QG 1⁺⁺ animals among the high-genetic group by further increasing the dietary energy content. Overall, this precision management strategy suggests the importance of adopting an MS based initial genetic grouping system for Hanwoo steers with a subsequent divergent management based on dietary energy level.

• Journal of Animal Science and Technology
• /
• v.65 no.6
• /
• pp.1242-1253
• /
• 2023

The present study aimed to investigate the feasibility of using a diet low in lysine content as a means for increasing the intramuscular fat (IMF) content and pork muscle quality of finishing pigs. Thirty-two crossbred gilts and barrows weighing approximately 80 kg were fed either a low-lysine diet (0.60%; Low-lys) or a control diet (0.80% lysine; Med-lys) under a 2 × 2 factorial arrangement of treatments. The animals were slaughtered at a 132-kg body weight (BW) on average, followed by physicochemical analyses and sensory evaluation on Longissimus lumborum (LL) and Semitendinosus (ST) muscles. The average daily gain (ADG) did not differ between the Med-lys and Low-lys groups. However, ADG exhibited a tendency of sex × diet interaction (p = 0.09), being greater for barrows vs. gilts on the Low-lys diet (p < 0.05), but not on the Med-lys diet. Backfat thickness adjusted for 132-kg BW also exhibited the interaction; it was greater for the Low-lys vs. Med-lys group within gilts but tended to be less for the former in barrows (p = 0.08). The IMF content was not influenced by the diet or sex in either LL or ST. The a^*, b^*, and Warner-Bratzler Shear Force values and fatty acid composition were influenced by the sex or diet in either or both of the muscles, but the treatment effects did not apparently influence the meat quality. Sensory scores for the flavor, juiciness, tenderness, umami, and palatability of cooked muscle were not influenced by the diet in either LL or ST. When the LL and ST data were pooled, scores for those sensory attributes were positively correlated with the IMF content, which was associated with overall greater IMF contents and greater sensory scores for ST vs. LL. Collectively, the Low-lysine diet seemingly elicited the intended lysine deficiency in gilts as indicated by the increased BFT due to the diet. However, the Low-lys diet was not effective for increasing the IMF deposition or eating quality of the pork muscle of finishing pigs slaughtered at high BW probably because its lysine content was not low enough to elicit either outcome.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.703-710
• /
• 2003

The purpose of this study was to detect association between genetic variation and economic trait in the porcine heart type fatty acid-binding protein gene as a candidate gene for the traits related with growth and meat quality in pigs. The H-FABP is a 15-kDa protein expressed in several tissues with high demand for fat metabolism such as cardiac and skeletal muscle and lactating mammary gland. H-FABP is small intracellular protein involved in fatty acid transport from the plasma membrane to the site of $\beta$-oxidation and/or triacylglycerol or phospholipid synthesis. In this study, H-FABP PCR-RFLP was performed in F$_2$ population composed of 214 individuals from an intercross between Korean Native Boars and Landrace sows. PCR products from two primer sets within H-FABP gene were amplified in 850bp and 700bp. Digestion of PCR products with the restriction digestion enzymes HaeⅢ and HinfⅠ, revealed fragment length polymorphisms(RFLPs). The genotype frequencies from H-FABP/HaeⅢ was .29 for genotype DD, .53 for genotype Dd, and .15 for genotype dd, respectively. The genotype frequencies of HH, Hh, and hh from H-FABP/HinfⅠ was .38, .41 and .20, respectively, in the population. Relationships between their genotypes and economic traits were estimated. In H-FABP/HaeⅢ locus, there were specific genotypes(Dd and dd) associated with economic traits such as body weights at 3, 5, 12, and 30 week of age (p〈.05 to .001). The ‘d’ allele was associated with gaining of body weight. In H-FABP/HinfⅠ locus, Genotypes of HH and Hh associated with growth traits such as body weights at 5, 12, and 30 week of age (p〈.05 or p〈.001) and back fat thickness, body fat including abdominal and trimmed fat (p〈.001) and intramuscular fat(p〈.05) The ‘H’ allele was positively associated with gaining of body weight and fatness deposition. In conclusion, a significant association of the H-FABP gene from its genetic variation was found on body weight, intramuscular fat and backfat thickness.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.265-273
• /
• 1997

The MR ratios and the exchange biasing field and interlayer coupling field were investigated in $Ni_{91}Fe_{19}/Co_{90}Fe_{10}/Cu/Co_{90}Fe_{10}/NiO$ spin-valve sandwiches grown on antiferromagnetic NiO films as a function of the NiO thickness, the thickness of Cu and pinning layer $Co_{90}Fe_{10}$. The spin-valve sandwiches were deposited on the Corning glass 7059 by means of the 3-gun dc and 1-gun rf magnetron sputtering at a 5 mtorrpartial Ar pressure and room temperature. The deposition field was 50 Oe. The MR curve was measured by the four-terminal method with applied magnetic soft bilayer [NiFe/CoFe] (90$\AA$) decreased dramatically to less than 10 Oe when the NiFe/CoFe bilayer used an NiFe bilayer thicker that 20$\AA$. So NiFe layer improved the softmagnetic properties in the NiFe/CoFe bilayer. The GMR ratio and the magnetic field sensitivity of the spin-valve film $Ni_{91}Fe_{19}(40{\AA})/Co_{90}Fe_{10}(50{\AA}) /Cu(30{\AA})/Co_{90}Fe_{10}(35{\AA})/NiO(800{\AA})$ was 6.3% and about 0.5 (%/Oe), respectively. The MR ratio had 5.3% below an annealing temperature of 20$0^{\circ}C$ which slowly decreased to 3% above 30$0^{\circ}C$. The large blocking temperature of the spin-valve film was taken (as being) due to the good stability of the NiO films. Thus, the spin-valve films with a free NiFe/CoFe layer clearly had a high large GMR output and showed a effective magnetic field sensitivity for a suitable spin-valve head material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.174-175
• /
• 2012

(In, Ga) N-based III-nitride semiconductor materials have been viewed as the most promising materials for the applications of blue and green light emitting devices such as light-emitting diodes (LEDs) and laser diodes. Although the InGaN alloy can have wide range of visible wavelength by changing the In composition, it is very hard to grow high quality epilayers of In-rich InGaN because of the thermal instability as well as the large lattice and thermal mismatches. In order to avoid phase separation of InGaN, various kinds of structures of InGaN have been studied. If high-quality In-rich InGaN/GaN multiple quantum well (MQW) structures are available, it is expected to achieve highly efficient phosphor-free white LEDs. In this study, we proposed a novel InGaN double hetero-structure grown on GaN nano-pyramids to generate broad-band red-color emission with high quantum efficiency. In this work, we systematically studied the optical properties of the InGaN pyramid structures. The nano-sized hexagonal pyramid structures were grown on the n-type GaN template by metalorganic chemical vapor deposition. SiNx mask was formed on the n-type GaN template with uniformly patterned circle pattern by laser holography. GaN pyramid structures were selectively grown on the opening area of mask by lateral over-growth followed by growth of InGaN/GaN double hetero-structure. The bird's eye-view scanning electron microscope (SEM) image shows that uniform hexagonal pyramid structures are well arranged. We showed that the pyramid structures have high crystal quality and the thickness of InGaN is varied along the height of pyramids via transmission electron microscope. Because the InGaN/GaN double hetero-structure was grown on the nano-pyramid GaN and on the planar GaN, simultaneously, we investigated the comparative study of the optical properties. Photoluminescence (PL) spectra of nano-pyramid sample and planar sample measured at 10 K. Although the growth condition were exactly the same for two samples, the nano-pyramid sample have much lower energy emission centered at 615 nm, compared to 438 nm for planar sample. Moreover, nano-pyramid sample shows broad-band spectrum, which is originate from structural properties of nano-pyramid structure. To study thermal activation energy and potential fluctuation, we measured PL with changing temperature from 10 K to 300 K. We also measured PL with changing the excitation power from 48 ${\mu}W$ to 48 mW. We can discriminate the origin of the broad-band spectra from the defect-related yellow luminescence of GaN by carrying out PL excitation experiments. The nano-pyramid structure provided highly efficient broad-band red-color emission for the future applications of phosphor-free white LEDs.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.25-38
• /
• 2020

Photoelectrochemical water splitting has been considered as the most promising technology for generating hydrogen energy. Transition metal dichalcogenide (TMD) compounds have currently attracted tremendous attention due to their outstanding ability towards the catalytic water-splitting hydrogen evolution reaction (HER). Herein, we report the synthesis method of various transition metal dichalcogenide including MoS₂, MoSe₂, WS₂, and WSe₂ nanosheets as excellent catalysts for solar-driven photoelectrochemical (PEC) hydrogen evolution. Photocathodes were fabricated by growing the nanosheets directly onto Si nanowire (NW) arrays, with a thickness of 20 nm. The metal ion layers were formed by soaking the metal chloride ethanol solution and subsequent sulfurization or selenization produced the transition metal chalcogenide. They all exhibit excellent PEC performance in 0.5 M H₂SO₄; the photocurrent reaches to 20 mA cm^-2 (at 0 V vs. RHE) and the onset potential is 0.2 V under AM1.5 condition. The quantum efficiency of hydrogen generation is avg. 90%. The stability of MoS₂ and MoSe₂ is 90% for 3h, which is higher than that (80%) of WS₂ and WSe₂. Detailed structure analysis using X-ray photoelectron spectroscopy for before/after HER reveals that the Si-WS₂ and Si-WSe₂ experience more oxidation of Si NWs than Si-MoS₂ and Si-MoSe₂. This can be explained by the less protection of Si NW surface by their flake shape morphology. The high catalytic activity of TMDs should be the main cause of this enhanced PEC performance, promising efficient water-splitting Si-based PEC cells.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.491-504
• /
• 2016

Jinwon Au-Ag deposit is located in the Uijin gun which is southeast 300 km from Seoul. The deposit area consists of mainly Precambrian Hongjesa granite, which occurs as porphyroblastic texture, medium grain and composed of quartz, feldspar and mica. This deposit consists of four parallel hydrothermal quartz veins that fill NE oriented fractures in Precambrian Hongjesa granite. The grade of quartz veins contain from 3.0 to 21.4 g/t (average 6.4 g/t) gold and from 5.0 to 252.0 g/t (average 117.9 g/t) silver, respectively. They vary from 0.2 m to 0.6 m (average 0.3 m) in thickness and extend to about 200 m in strike length. Quartz veins occur as massive, network, cavity, breccia, crustiform, comb and zonal textures. Wallrock alteration has silicification, sericitization, pyritization and argillitization. The mineralogy of the quartz veins consists of quartz, arsenopyrite, cassiterite, pyrite, sphalerite, chalcopyrite, galena, electrum, tetrahedrite, canfieldite, argentite, Ag-Sb-S mineral, Mn-Fe-O mineral, Pb-O mineral and Pb-P-Cl-O mineral(chloro-pyromorphite). Chemical compositions of minerals from this deposit are as followed; Fe/Fe+Mg of sericite is from 0.32 to 0.71, As content of arsenopyrite ranges from 27.91 to 30.33 atomic %, FeS content of sphalerite range from 9.77 to 16.76 mole %, Ag content of electrum is from 29.42 to 37.41 atomic % and Ag content of tetrahedrite range from 32.17 to 36.53 wt.%, respectively. Baased on mineralogy and chemical compositions of minerals from Jinwon Au-Ag deposit, deposition of minerals was caused by a change in temperature, oxygen fugacity($fO_2$) and sulfur fugacity($fS_2$) from the near neutral hydrothermal fluid evolved by reaction with wallrock.

• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.9-14
• /
• 2009

Insulin-like growth factor 2 (IGF2) is the first identified imprinted gene, which is paternally expressed in multiple mammalian species. A paternally expressed QTL for muscle growth and backfat thickness (BFT) has previously been identified near the IGF2 locus on the distal tip of pig chromosome 2 (SSC2p). Therefore the IGF2 gene is considered an economically important candidate gene for pig industry. Herein, this study explored genetic variation of IGF2 for in3-G3072A, in7-G162C and a new SNP in intron7 (C1589T) in Korean native pig (KNP) and commercial pig breeds, and detected their linkage disequilibrium within these breeds. Furthermore we investigated the effect of in3-G3072A on IGF2 gene expression in post-natal muscle and backfat tissues. The real-time quantitative PCR results showed that animals inherited allele G from a KNP sire had significant higher IGF2 gene expression in backfat tissue than those inherited allele A from a Yorkshire sire, however opposite situation in muscle. These results demonstrated the allele 3072G is associated with a higher IGF2 gene expression in fat tissues, but low gene expression in muscle tissues when compared with the 3072A allele. These results suggest that KNP with lower muscle mass and higher fat deposition might be associated with a higher frequency of the 3072G allele, and selecting KNP based on IGF2 genotypes could result in an economic benefit to KNP producers.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.348-353
• /
• 1997

Hydrogenated amorphous carbon(a-C:H) films were deposited on p-type Si(100) by DC saddle-field plasma enhanced CVD to investigate the effect of substrate bias on optical properties and structural changes. They were deposited using pure methane gas at a wide range of substrate bias at room temperature and 90 mtorr. The substrate bias voltage ($V_s$) was employed from $V_s=0 V$ to $V_s=400 V$. The information of optical properties was investigated by photoluminescence and transmitance. Chemical bondings of a-C:H have been explored from FT-IR and Raman spectroscopy. The thickness and relative hydrogen content of the films were measured by Rutherford backscattering spectroscopy (RBS) and elastic recoil detection (ERD) technigue. The growth rate of a-C:H film was decreased with the increase of $V_s$, but the hydrogen content of the film was increased with the increase of $V_s$. The a-C:H films deposited at the lowest $V_s$ contain the smallest amount of hydrogen with most of C-H bonds in the of $CH_2$ configuration, whereas the films produced at higher $V_s$ reveal dominant the $CH_3$ bonding structure. The emission of white photoluminescence from the films were observed even with naked eyes at room temperature and the PL intensity of the film has the maximum value at $V_s$=200 V. With $V_s$ lower than 200 V, the PL intensity of the film increased with V, but for V, higher than 200 V, the PL intensity decreased with the increase of $V_s$. The peak energy of the PL spectra slightly shifted to the higher energy with the increase of $V_s$. The optical bandgap of the film, determined by optical transmittance, was increased from 1.5 eV at $V_s$=0V to 2.3 eV at $V_s$=400 V. But there were no obvious relations between the PL peak and the optical gap which were measured by Tauc process.