• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1663-1673
• /
• 2021

Objective: Pork belly is considered as the most commercially important and preferable primal cut by consumers worldwide. Thus, this study was conducted to determine the effects of fat levels on the meat quality characteristics of pork bellies. Methods: Seventy-eight growing-finishing pigs collected from different commercial pig farms were slaughtered and used in the present study. After slaughter 24 h, bellies were fabricated according to the Korean Pork Cutting Specification, and immediately sampled for analysis of their fat content. Based on the fat levels, the bellies were segregated into three different groups: low fat (LF, fat ≤20%, n = 15), medium fat (MF, fat 21% to 30%, n = 30), and high fat (HF, fat ≥31%, n = 33). The bellies were then analyzed for meat quality traits, fatty acids, flavor compounds and eating quality properties. Results: The HF group had lower moisture and cooking loss levels compared to the other groups (p<0.05). The LF group presented higher proportions of polyunsaturated fatty acids compared to the other groups (p<0.05). The LF group showed higher amounts of the Maillard reaction-derived flavor compounds (e.g., 2,5-dimethyl pyrazine, 2-ethyl-3,5-dimethyl, and 4-methylthiazole) associated with meaty and roasty flavors whereas, the HF group showed higher amounts of oleic acid- derived compounds (e.g., nonanal and octanal) associated with the fatty and oily flavors. Interestingly, significantly higher scores for all the eating quality attributes (flavor, juiciness, tenderness, and overall acceptance) were found in the HF group compared to those in the LF or MF group (p<0.05). Conclusion: The high-fat bellies (fat ≥31%) had a better technological quality and eating quality compared to the low-fat bellies (fat ≤20%). Thus, increasing the fat content may improve the technological quality and eating quality traits of pork bellies, however, this increase may also result in more trimmed loss due to excessively deposited body fat.

• Journal of Marine Life Science
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2020

This review is about current Streptococcosis of cultured olive flounder, Paralichthys olivaceus, in South Korea. The main bacterial species are Streptococcus iniae, S. parauberis and Lactococcus garvieae. The occurrence trend has been arranged with published data and seed bank (NIFS) data that was examined with deposited strains and the number from 2002 to 2017. S. iniae and L. garvieae were collected until 2012 and 2002, respectively, but not collected any more after that year. In recent years, the dominant strain of Streptococcosis of cultured olive flounder is S. parauberis. The phenotypic and genetic characteristics of standard strains and isolated strains were examined with published paper. Notably, we describe about distinguishing gross signs and histological signs of 3 types of Streptococcosis in this report. White turbidity of eye, hemorrhage, enteritis and ascites are main signs of S. iniae infection. Darkness of body surface, hemorrhage in somatic muscle and pericarditis are predominant in occasion S. parauberis infection. In occasion of L. garvieae infection, common signs of Streptococcosis are revealed, but these are weak tendency compared with the previous two cases.

• Journal of Sericultural and Entomological Science
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2019

This study was carried out to investigate the development and oviposition characteristics of Tenodera aridifolia. The nymphs of T. aridifolia grew to adults through 6 and 7 nymphal instars. The percentage of 7 nymphal instars (7-instar type) at 25, 28, and $30^{\circ}C$ were 77.3, 76.2, and 73.5%, respectively. In the 7 instars type, total nymphal periods at 25, 28, and $30^{\circ}C$ were 71.9, 53.5, and 54.7 days, respectively. And, there was no difference in deveolpmental periods between 6- and 7-instar types at all temperatures. Egg periods were 41.3 days at $25^{\circ}C$. Adult longevity of females were 82.0 days, deposited average 3.2 oothecae at intervals of 11.7~18.7 days at $28^{\circ}C$ during her life span. The first ootheca was the largest and $40.5mm{\times}22.0mm{\times}17.3mm$ in size. The number of average eggs per oothecae was 178.6 at $28^{\circ}C$.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.267-275
• /
• 2018

The dredged sediment management system was developed to have an objective, quantitative and scientific decision for the optimum removal time of dredged sediments behind debris barrier and was set up at the real site. The dredged sediment management system is designed and developed to directly measure the dredged sediments behind debris barrier in the field. This management system is composed of Data Acquisition System (DAS), Solar System and measurement units for measuring the weight of dredge sediments. The weight of dredged sediments, the water level and the rainfall are measured in real time using the monitoring sensors, and their data can be transmitted to the office through a wireless communication method. The monitoring sensors are composed of the rain gauge to measure rainfall, the load cell system to measure the weight of dredged sediments, and water level meter to measure the water level behind debris barrier. The management criteria of dredged sediments behind debris barrier was suggested by using the weight of dredged sediments. At first, the maximum weight of dredged sediments that could be deposited behind debris barrier was estimated. And then when 50%, 70% and 90% of the maximum dredged sediments weight were accumulated behind debris barrier, the management criteria were divided into phases of Outlooks, Watch and Warning, respectively. The weight of dredged sediments can be monitored by using the dredged sediment management system behind debris barrier in real time, and the condition of debris barrier and the removal time of dredged sediments can be decided based on monitoring results.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.163-176
• /
• 2019

The Potosinian geological basement in central Mexico is comprised of the Upper Paleozoic metamorphic rocks, which crop out on the Sierra de Catorce nucleus located in the northeastern part of the state. The sedimentary sequence that covers unconformably the Paelozoic basement is represented by an Upper Triassic marine sedimentary sequence, correlating to the Zacatecas Formation and the Upper Triassic continental Huizachal Formation red beds, which in turn are covered either by La Joja Formation Jurassic red beds or by Upper Jurassic marine sediments. This sequence is overlain by the conformable Cretaceous calcareous marine sedimentary rocks in all the state of San Luis Potosi. The Cenozoic sequence unconformably covers some of the aforementioned rocks and is represented by undifferentiated volcanic rocks as well as by marine clastic rocks. The existing intrusive igneous rocks are felsic to intermediate composition, and they intrude the metamorphic basement and sedimentary rocks. Conglomerates with evaporitic sediments were deposited during the Pleistocene. The Quaternary sequence includes basalt flows, piedmont deposits, alluvium, and occasionally evaporites and caliche layers. In the state of San Luis Potosi, a great diversity of mineral deposit types is known as both metallic and nonmetallic. The host rocks of these deposits vary from one another including formations that represent from Paleozoic up to Tertiary. The mineralization age corresponds approximately to Tertiary (75%), and is mainly epigenetic. Conclusively, the data on geology and mineralization in San Luis Potosi, Mexico are helpful to predict a hidden ore body and select promising mineralized zone(s) when the domestic company makes inroads in the mining sector of Mexico.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1626-1632
• /
• 2018

In this paper, we describe the fabrication and characterization of a hydrogen peroxide ($H_2O_2$) sensor based on palladium and copper (PdCu) electroplated laser induced graphene (LIG) electrodes. $CO_2$ laser was used to form LIG electrodes on a PI film. This fabrication method allows simple control of the LIG electrode size and shape. The PdCu was electrochemically deposited on the LIG electrodes to improve the electrocatalytic reaction with $H_2O_2$. The electrochemical performance of this sensor was evaluated in terms of selectivity, sensitivity, and linearity. The physical characterization of this sensor was conducted using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), which confirmed that PdCu was formed on the laser induced graphene electrode. In order to increase the sensor sensitivity, the Pd:Cu ratio of the electroplated PdCu was varied to five different values and the condition of highest amperometric current at an identical of $H_2O_2$ concentration was chosen among them. The resulting amperometric current was highest when the ratio of Pd:Cu was 7:3 and this Pd;Cu ratio was employed in the sensor fabrication. The fabricated PdCu/LIG electrode based $H_2O_2$ sensor exhibited a sensitivity of $139.4{\mu}A/mM{\cdot}cm^2$, a broad linear range between 0 mM and 16 mM of $H_2O_2$ concentrations at applied potential of -0.15 V, and high reproducibility (RSD = 2.6%). The selectivity of the fabricated sensors was also evaluated by applying ascorbic acid, glucose, and lactose separately onto the sensor in order to see if the sensor ourput is affected by one of them and the sensor output was not affected. In conclusion, the proposed PdCu/LIG electrode based $H_2O_2$ sensor seems to be suitable $H_2O_2$ sensor in various applications.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.253-260
• /
• 2019

Radiation dose enhancement is a method of increasing the cross section of interaction, thus increasing the deposited dose. This can contribute to linear energy transfer, LET and relative biological effectiveness, RBE. Previous studies on dose enhancement have been mainly focused on X, ${\gamma}-rays$, but in this study, the dose enhancement was analyzed for proton using Monte Carlo simulation using MCNP6. Based on the mathematical modeling method, energy spectrum and relative intensity of spread out Bragg-peak were calculated, and evaluated dose enhancement factor and dose distribution of dose enhancement material, such as aurum and gadolinium. Dose enhancement factor of 1.085-1.120 folds in aurum, 1.047-1.091 folds in gadolinium was shown. In addition, it showed a decrease of 95% modulation range and practical range. This may lead to an uncertain dose in the tumor tissue as well as dose enhancement. Therefore, it is necessary to make appropriate corrections for spread out Bragg-peak and practical range from mass stopping power. It is expected that Monte Carlo simulation for dose enhancement will be used as basic data for in-vivo and in-vitro experiments.

• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.41-49
• /
• 2013

Recent findings have revealed that black carbon is one of the substantial materials affecting climate change along with greenhouse gases. Usually, black carbon is generated by incomplete combustion of biomass and deposited on snow and ice surface, resulting in increasing adsorption of radiant energy and accelerating ice melting. However, it is still questionable what the emission characteristics of black carbons from biomass combustion is. We investigated the emission characteristics of black carbon generated from a wood stove in this study. We found that the emission of black carbon was highly dependent upon combustion temperature and the amount of combustion air supplied. The emission factors were 1.01 g-BC/kg-Oak for fireplace wood burning under incomplete combustion, 0.37 g-BC/kg-Oak for fireplace wood burning under complete combustion and 0.29 g-BC/kg-Oak for small wood-stove burning.

• Research in Plant Disease
• /
• v.24 no.4
• /
• pp.285-291
• /
• 2018

Two isolates of Strawberry mild yellow edge virus were newly isolated in strawberry (Fragaria x ananassa) cultivar Selhyang and Kamhong from Korea. The complete nucleotide sequence of the coat protein (CP) of two Korean isolates were determined and analyzed. Sequence identity of nucleotide and amino acid between SH and KH isolates was 90.4% and 95.5%, respectively. The comparison of three Korean isolates including previously reported KNS1 with 45 SMYEV sequences from other countries deposited in GenBank database revealed an identity ranging from 81.2% to 100%. The phylogenetic analysis of CP of all SMYEV isolates showed the five subgroups (I-V), with Korean isolates being divided into two different subgroups. The isolates KH and KNS1 were included in subgroup I, whereas SH was included in subgroup IV which is new phylogenetic subgroup. Genetic diversity analysis indicated that new subgroup had greater variability and nucleotide diversity between subgroups resulted in values ranging from 0.0863 to 0.18004. This report represents the first molecular characterization of SMYEV isolates from Korea.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.40-61
• /
• 2009

The Cretaceous Gyeongsang Supergroup, composed of clastic sediments mostly deposited in the lacustrine and fluvial environment, is widely distributed in the southern part of the Korean Peninsula. Diverse fossils of plants, molluscs, insects, footprints of dinosaurs, pterosaurs and birds, and eggs, bones, and teeth of dinosaurs have been found from the Gyeongsang Supergroup. New types of dinosaur, pterosaur, and bird tracks recently discovered from the Gyeongsang Supergroup attract great attention from the world. Several tracksites of dinosaurs and birds were designated as Natural Monument and nationally conserved, and many efforts have given to them for nomination of UNESCO World Heritage. Bird tracks from the Gyeonsang Supergroup are Koreanaornis hamanensis, Jindongornipes kimi, Goseongornipes markjonesi, Ignotornis yangi, Uhangrichnus chuni, and Hwangsanipes choughi, which correspond approximately one third of Mesozoic bird tracks recorded from the world. The Gyeongsang Basin of the Korean Peninsula yields world most diverse bird tracks which may be called a paradise of Mesozoic birds and they are important natural heritage providing significant information about evolution and paleogeographic distribution of birds.